|
2002-09-19 Julian Cummings <cummings@artemis.cacr.caltech.edu>
* testsuite/Adnene-Ben-Abdallah-2.cpp: Skip part of this test when using IBM xlC compiler, since it can't handle it. * testsuite/extract.cpp: Added workaround for IBM xlC compiler bug. * compiler/ieeemath.cpp: Commented out unused variable. Added test to skip over testing of lgamma() function if building on AIX platform in threaded mode. This test causes a failure in this case because the lgamma function has a slightly different interface in thread-safe mode on AIX. * src/Makefile.am: Added explicit command for building libblitz.a that utilizes $AR_FLAGS. * src/Makefile.in: Regenerated from Makefile.am using automake. * configure.in: Cleaned up some of the settings of compiler flags and added use of the C++ compiler as the archiver for KCC and SGI CC. Added new --enable-64bit option to trigger 64-bit configuration and builds. This currently works for the SGI and IBM platforms with the native compilers or with KCC or gcc. Note: I have left the old SGI64 and SGI32 compiler options in for now, but there is also a new plain old SGI option that will build with the default ABI. Using the --enable-64bit option should then force 64-bit compiles. * configure: Regenerated from configure.in using autoconf. * blitz/array/fastiter.h: Removed meaningless restrict qualifier inside const_cast that generates compiler warnings under SGI and KCC compilers. 2002-09-05 Julian Cummings <cummings@artemis.cacr.caltech.edu> * configure: Regenerated from configure.in using autoconf. * configure.in: Added flag -qrtti=all when using IBM's xlC compiler to enable RTTI support. 2002-08-30 Julian Cummings <cummings@artemis.cacr.caltech.edu> * testsuite/storage.cpp: Modified construction of one Array to test new setStorage() method. * blitz/array/methods.cc: Added definition of setStorage() method, which lets user set Array storage format after construction. We check that Array is not allocated first. * blitz/array-impl.h: Added declaration of setStorage() method, which lets user set Array storage format after construction. * blitz/array/storage.h: Added explicit assignment operator for GeneralArrayStorage class. Wed Jul 24 11:06:41 CEST 2002 Patrick Guio <patrick.guio@fys.uio.no> * configure.in: Removed occurences of -DBZ_DISABLE_XOPEN_SOURCE, this is the default and changed to -DBZ_ENABLE_XOPEN_SOURCE for DECcxx6.2 and DECcxx6.3 required for scoping of ilogb. * configure: Rebuilt from configure.in using autoconf 2.53 * all Makefile.in: Rebuilt from Makefile.am using automake 1.6.2 2002-07-23 Julian Cummings <cummings@artemis.cacr.caltech.edu> * blitz/array/functorExpr.h: Changed _bz_FunctorExpr classes to store user-defined functor by value rather than by const reference. This fixes a problem under certain compilers with the state of the user-defined functor being corrupted prior to evaluation of the Array expression. Also, cleaned up remnants from previous use of Blitz minmax function. * blitz/array/expr.h: Added a four-argument templated constructor for _bz_ArrayExpr, which is needed when building an Array expression containing a functor that takes three arguments. This is needed to support functorExpr.h, which allows functors with up to three arguments. * testsuite/newet.cpp: Changed expressions used in final test to ensure that two-argument pow() function is called with first argument being non-negative. Otherwise, the results of the function call are undefined. 2002-07-19 Julian Cummings <cummings@artemis.cacr.caltech.edu> * blitz/blitz.h: Put ending semicolon into definition of BZ_MUTEX_* macros so that you don't need to add a semicolon after invoking the macro. * blitz/memblock.h: Removed ending semicolon after invocations of BZ_MUTEX_* macros. This is now handled within the definition of these macros. This should get rid of compiler warnings from SGI CC and others about extra semicolons being ignored, which happened when these macros were defined as blank. Fri Jul 19 10:50:11 CEST 2002 Patrick Guio <patrick.guio@fys.uio.no> * blitz/mathfunc.h: Added missing template member function prettyPrint in template class _bz_negate (HP aCC complained during library compilation). * blitz/array/functorExpr.h: minmax::max(a,b) replaced by (a>b?a:b) due to namespacing trouble with HP/aCC 2002-07-17 Julian Cummings <cummings@artemis.cacr.caltech.edu> * blitz/memblock.h: Added missing semicolon after use of BZ_MUTEX_DECLARE macro. 2002-07-16 Julian Cummings <cummings@artemis.cacr.caltech.edu> * Makefile.am: Added line to specify subdirectories and insure that compiler subdirectory is visited before blitz subdirectory. This is necessary because the compiler subdirectory generates the config.h header file needed in blitz subdirectory. * Makefile.in: Rebuilt from Makefile.am. * configure: Rebuilt from configure.in. Includes changes to IBM xlf90 flags. * aclocal.m4: Rebuilt using aclocal 1.6.2. * blitz/Makefile.am: Added config.h to blitz_HEADERS list and removed all the compiler-specific config files. These compiler-specific files should no longer be needed because we normally generate the config.h file automatically. Moved the compiler-specific headers to the EXTRA_DIST list so they will still be included in the distribution tarball. * blitz/Makefile.in: Rebuilt from Makefile.am. * blitz/array/funcs.h: Removed ET support for Array expressions involving ldexp(), jn() and yn() functions. These functions require specialized macros that allow one of the function arguments to be an ordinary int. Such macros have not yet been added to <blitz/funcs.h>. 2002-07-02 Julian Cummings <cummings@artemis.cacr.caltech.edu> * examples/cast.cpp: Added check for use of new-style expression templates. I changed the syntax for casting the type of a blitz Array to make it simpler. Instead of giving a second argument that is an instance of the new element type, just provide the new element type as a template parameter. * testsuite/newet.cpp: Added testing of functorExpr.h header file, which provides support for declaring user-defined functors and class methods that act on Array types. The code for this support originated from Derrick Bass of Caltech. * testsuite/tinyvec.cpp: Include blitz/tinyvec-et.h here to get ET support. * blitz/vecexpr.h: Undid the previous change to this file. Vector ET support is now gotten by including blitz/vector-et.h explicitly. * blitz/promote.h: Added BZ_BLITZ_SCOPE to promote_trait in BZ_PROMOTE macro definition so that this macro works correctly outside the blitz namespace. * blitz/Makefile.am: Removed Array.h, Vector.h, TinyVec.h and TinyMat.h from blitz_HEADERS. Added array-old.h, vector-et.h tinyvec-et.h and funcs.h. * blitz/Makefile.in: Rebuilt from Makefile.am to update blitz_HEADERS. * blitz/array.h: This file used to be called Array.h but has been renamed to avoid name clashes on Windows-based systems. This file includes only the Array class implementation files. * blitz/array/newet-macros.h: Renamed and reorganized new style macros for declaring unary and binary functions/operators that act on Array types. * blitz/array/newet.h: Added #include of blitz/array/functorExpr.h to support user-defined functors and class methods acting on Array types. * blitz/array/funcs.h: Use new style of Array ET macros to declare unary and binary math functions that act on Array types. * blitz/array/ops.h: Use new style of Array ET macros to create unary and binary operators that act on Array types. * blitz/ops.h: Rewrote and reorganized this file to make better use of macros to generate all the functor classes needed to provide unary and binary operators for the "new" style of expression templates. * blitz/array/Makefile.am: Added functorExpr.h to list of array_HEADERS. * blitz/array/Makefile.in: Rebuilt from Makefile.am to include new header file. 2002-06-28 Julian Cummings <cummings@artemis.cacr.caltech.edu> * blitz/mathfunc.h: Corrected categorization of fmod and ilogb math functions. * blitz/vecuops.cc: Freshly generated from genvecuops.cpp. Changed BZ_HAVE_SYSV_MATH to BZ_HAVE_SYSTEM_V_MATH to match what is in config.h and elsewhere. Corrected categorization of a few math functions. Otherwise, no changes. * blitz/matuops.h: Freshly generated matuops.h header file with definitions for unary math functions operating on Matrix types. This file was previously empty. I followed a style similar to that of vecuops. * blitz/matbops.h: Rebuilt from latest genmatbops.cpp. Same content as before with slightly different formatting. Also, binary combinations with complex<T> are now handled with a single templated ComplexOperand type as with vecbops. * blitz/generate: Added support for generating matuops.h header file borrowing heavily from the existing genvecuops code. Also made a few corrections in categorization of math functions. * configure.in: Added -qstrict flag to F77 and F90 optimization flags on AIX platforms to avoid optimizations that might alter the code semantics, as suggested by the compiler. Added flag for xlf90 compiler to allow f90 file suffix. * config.guess: Undo previous change to this script regarding use of oslevel script on AIX. This was a mistake based on an error in my environment variable settings. 2002-06-27 Julian Cummings <cummings@artemis.cacr.caltech.edu> * compiler/sysvmath.cpp: Removed ilogb() and fmod() from this test. ilogb() is now in the IEEE math test and fmod() should be in the standard C math library. * compiler/ieeemath.cpp: Added tests for cbrt() and ilogb() here. * compiler/getruse.cpp: Added code to check if getrusage() is available. * blitz/benchext.cc: Changed loop variable j to unsigned to eliminate signed/unsigned comparisons. * testsuite/complex-test.cpp: Added some explicit casts to float to eliminate precision loss warnings from implicit conversions of double to float. Changed abs() to fabs() for floating-point arguments. abs() is for ints or complex numbers, while fabs() is for floating-point numbers. * testsuite/chris-jeffery-1.cpp: Slight change to eliminate precision loss warning from double/float conversion. * blitz/array/storage.h: Use _bz_bool and _bz_true where appropriate to avoid int/bool conversions. * blitz/array/fastiter.h: Changed order of ctor initializers to match order of member data declarations, eliminating warning from gcc compiler. * blitz/array/slicing.cc: Modified valid indexing check to avoid casting to unsigned. * blitz/shapecheck.h: Changed loop variable i to unsigned to avoid unsigned/signed comparisons. * blitz/array-impl.h: Modified the isInRange() methods to check that each index value is greater than or equal to the base index value, rather than just casting (index-base) to an unsigned int. The latter gives unpredictable results if index<base and produces compiler warnings about comparisons between unsigned and signed quantities. * blitz/tinyvec.h: Changed return type of lengthCheck() method from int to _bz_bool. * testsuite/extract.cpp: Undid previous change and went back to using static const int data members instead of enums for red, green and blue. These have to be actual ints, or else the Array operator[] does not work properly. Need to investigate further the link-time error that occurs with this test code when using xlC. 2002-06-26 Julian Cummings <cummings@artemis.cacr.caltech.edu> * configure: Rebuilt from configure.in. * configure.in: Moved package and version arguments back to AM_INIT_AUTOMAKE macro call. The new style suggested in the automake documentation doesn't seem to work right when the tarball name contains uppercase letters and is not trivially derived from the package name. * configure.in: Added section to handle xlC as a valid C++ compiler option. Moved package name and version number arguments to AC_INIT macro. Moved AC_CANONICAL_TARGET macro call higher up in file to eliminate autoconf warning. * config.guess: Commented out use of oslevel command on AIX platform to get OS version and release info, since it does not always seem to report the right thing and can send confusing output to config.sub. * examples/Makefile.in: Rebuilt from examples/Makefile.am. * examples/Makefile.am: Added profile.cpp, tiny2.cpp and tiny3.cpp to EXTRA_DIST, so that these files will be included in the distribution tarball. This is necessary because these files are not include in SOURCES and are not normally compiled. * testsuite/extract.cpp: Changed members red, green and blue of class RGB24 from static const int's to enumerators in order to avoid a link-time error with xlC compiler. * blitz/tinyvec.h: Changed P_numtype to T_numtype inside class definition consistently. * blitz/array-impl.h: Changed template parameter name T_numtype2 to P_numtype2 in member function template declarataions for consistency with definitions and to avoid any confusion with typedef T_numtype. * blitz/array/slicing.cc: Changed T_numtype to P_numtype when used outside the argument list or body of a member function definition (i.e., outside the class scope). Inside the class scope, we can use the typedef T_numtype. The IBM xlC compiler gets confused if P_numtype is used as a template parameter name in a member function declaration and then T_numtype is used as the parameter name in the member function definition. Fixed usage to be more consistent. * blitz/array/methods.cc: Likewise. * blitz/array/ops.cc: Likewise. * blitz/tinyvec.cc: Likewise. * blitz/array/et.h: Added #include of blitz/array/misc.cc if not using new expression templates. * blitz/array-impl.h: Explicitly specify second template argument for ListInitializationSwitch, rather than relying on the default value. This eliminates a compilation problem using the xlC compiler. Also removed #include of misc.cc, which is now handled in blitz/array/et.h. * blitz/tinymat.h: Likewise. * blitz/tinyvec.h: Likewise. 2002-05-27 Julian Cummings <cummings@tis-sa-ack.cacr.caltech.edu> * blitz/array-impl.h: Removed use of this-> as means of accessing members of templated base class. Instead provided using declarations for these members within the derived class definitions to bring them into the scope of the derived class. * blitz/array/slicing.cc: Likewise. * blitz/array/eval.cc: Likewise. * blitz/array/methods.cc: Likewise. * blitz/array/storage.h: Likewise. * blitz/array/stencil-et.h: Likewise. * blitz/array/iter.h: Likewise. * blitz/matrix.cc: Likewise. * blitz/vector.cc: Likewise. * blitz/memblock.h: Likewise. * blitz/matrix.h: Likewise. * blitz/vector.h: Likewise. Fri May 24 10:25:23 CEST 2002 Patrick Guio <patrick.guio@fys.uio.no> * INSTALL: added instruction for cvs repository installation in case a problem should occur with the build system. * configure.in: removed some unecessary check * configure: regenerated with autoconf 2.53, automake 1.6.1, libtool 1.4.2 * every Makefile.in: likewise Thu May 23 17:08:43 CEST 2002 Patrick Guio <patrick.guio@fys.uio.no> * configure.in: added support for ranlib on SGI that failed and a few other tests. The variable RANLIB is set to "ar ts" for SGI as well as for DECcxx. * blitz/Makefile.am: added tinymatio.cc in the blitz_HEADERS variable * configure: regenerated with autoconf 2.53, automake 1.6.1, libtool 1.4.2 * every Makefile.in: likewise 2002-05-22 Julian Cummings <cummings@artemis.cacr.caltech.edu> * blitz/array/eval.cc: Fixed bug in Array::evaluateWithIndexTraversal1() by removing cast of second argument to T_numtype in call to T_update::update(). This cast will occur automatically when the update operation is performed. This fixes a problem reported by Masahiro Tatsumi <tatsumi@nfi.co.jp> in which one could not assign a double to an Array of TinyVectors of double without explicitly constructing a TinyVector of doubles on the right-hand side. Also fixed an unused variable warning emanating from the function Array::evaluateWithFastTraversal() by moving the definition of local variable "last" so that it is only seen if it is used. * blitz/tinymatio.cc: new file (I/O operations for blitz TinyMatrix) * blitz/tinymat.h: added #include of <blitz/tinymatio.cc> Fri May 10 16:25:14 CEST 2002 Patrick Guio <patrick.guio@fys.uio.no> * blitz/randref.h: private constructor for template class _bz_VecExprRandom did not had an explicit initialiser for the private member random_, added it. Compaq C++ V6.5-014 for Compaq Tru64 UNIX V5.1A (Rev. 1885) complained about this. * blitz/array/map.h: likewise for template class ArrayIndexMapping Wed May 8 15:24:29 CEST 2002 Patrick Guio <patrick.guio@fys.uio.no> * configure.in: regenerated by running the command autoupdate from autoconf 2.53 * configure: regenerated by running the command autoreconf --force --install with autoconf 2.53, automake 1.6.1, libtool 1.4.2 * COPYING: likewise * Makefile.in: likewise * benchmarks/Makefile.in: likewise * bin/Makefile.in: likewise * blitz/Makefile.in: likewise * blitz/array/Makefile.in: likewise * blitz/generate/Makefile.in: likewise * blitz/meta/Makefile.in: likewise * compiler/Makefile.in: likewise * examples/Makefile.in: likewise * lib/Makefile.in: likewise * manual/Makefile.in: likewise * manual/examples/Makefile.in: likewise * manual/stencils/Makefile.in: likewise * random/Makefile.in: likewise * src/Makefile.in: likewise * testsuite/Makefile.in: likewise * aclocal.m4: likewise * install-sh: likewise * missing: likewise * mkinstalldirs: likewise * depcomp: new file generated by running autoreconf --force --install with autoconf 2.53, automake 1.6.1, libtool 1.4.2 * config.guess: imported from automake 1.6.1 * config.sub: likewise * benchmarks/Makefile.am: removed target 'compile' that caused trouble when 'make dist' * benchmarks/Makefile.in: regenerated with automake * examples/Makefile.am: removed targes 'compile' and 'all' that caused trouble when 'make dist' * examples/Makefile.in: regenerated with automake Wed Apr 17 18:45:13 2002 Patrick Guio <patrick.guio@fys.uio.no> * blitz/array/stencil-et.h: replaced T_numtype with P_numtype in every macros definitions. Fixed a compilation problem with aCC/HP in the stencils examples (stencils2.cpp, stencil3.cpp, stencilet.cpp) in the directory examples. Suggested by Robert W. Techentin <techentin.robert@mayo.edu> Thu Mar 21 11:12:36 CET 2002 Patrick Guio <patrick.guio@fys.uio.no> * examples/io.cpp: added #ifdef BZ_HAVE_STD for #include <fstream> * examples/polymorph.cpp: corrected polymorph container declaration Array<Material&,1> by Array<Material*,1> * examples/prettyprint.cpp: removed unecessary #include <iostream.h> * examples/rand2.cpp: likewise * examples/rand2.cpp: added return 0; to function int main2() * examples/tiny3.cpp: fixed typo #include <blitz/TinyMath.> into #include <blitz/TinyMat.h> * examples/Makefile.{am,in}: removed targets tiny2.cpp (no int main()), tiny3.cpp (no int main()) and profile.cpp (requires tau profiling) * array/stencil-et.h: replaced iter_ by this->iter_ in derived template classes of StencilExpr template class Thu Mar 7 09:06:58 CET 2002 Patrick Guio <patrick.guio@fys.uio.no> * configure.in: f90 optimisation flag set to O3 for platform *hp-hpux* * blitz/array/io.cc: cosmetic change * blitz/traversal.h: moved template<int N_dimensions> _bz_typename TraversalOrderCollection<N_dimensions>::T_set TraversalOrderCollection<N_dimensions>::traversals_; after the declaration of template<int N_dimensions> class TraversalOrderCollection * TODO: new file * blitz/array/expr.h: line 124 #ifdef BZ_NEW_EXPRESSION_TEMPLATES replaced by #if defined(BZ_NEW_EXPRESSION_TEMPLATES) && ! defined(__MWERKS__) line 134 added #if !defined(__MWERKS__) #endif as suggested by Xavier Warin <xavier.warin@der.edfgdf.fr> for Metrowerks code warrior compiler * random/mt.h: fixed use of STL iterator as suggested by Julian Cummings <cummings@cacr.caltech.edu> and Osamu Ogasawara <oogasawa@ims.u-tokyo.ac.jp> * blitz/config-mwerks.h: new file, configuration file for Metrowerks code warrior compiler proposed by Xavier Warin <xavier.warin@der.edfgdf.fr> * INSTALL: updated with the new make targets * Makefile.am (in each directory): fixed a bug for the target dist * configure.in: added support for Intel icf (Fortran 90 compiler) when target is *linux* and CXX is Intel icc * benchmarks/Makefile: added work.pc* in clean target, these files are generated when running Intel Fortran 90 compiler ifc * benchmarks/plot_benchmarks.m.in: new file to generate m-file benchmarks/plot_benchmarks.m to plot benchmarks results * configure.in: added benchmarks/plot_benchmarks.m to be generated from benchmarks/plot_benchmarks.m.in * configure.in: output correctly the available DEC (actually now Compaq:-) compilers * INSTALL: likewise Wed Mar 6 11:41:32 CET 2002 Patrick Guio <patrick.guio@fys.uio.no> * ChangeLog: new file * testsuite/mattias-lindstroem-1: removed (executable) * configure.in: updated with autoupdate (GNU autoconf) 2.49c, added support for HP-UX aCC and Intel icc. * aclocal.m4: renamed to acinclude.m4. It contains the *_BZ_* declarations * acinclude.m4: new file generated by running aclocal (GNU automake) 1.4a * Makefile.am (in each directory): new files (to generate a Makefile.in with automake) * bin/Makefile.in, blitz/Makefile.in, blitz/array/Makefile.in, * blitz/generate/Makefile.in, blitz/meta/Makefile.in, lib/Makefile.in, * manual/Makefile.in, manual/examples/Makefile.in, * manual/stencils/Makefile.in, random/Makefile.in,: new files generated from Makefile.am generated by running automake (GNU automake) 1.4a * .cvsignore (in each directory): new files * missing: new file generated when running the script autoconf -a -c -i (GNU autoconf) 2.49c * mkinstalldirs: likewise * config.guess: updated from automake 1.4a * config.sub: likewise * GPL: renamed to COPYING according to GNU standard * AUTHORS, COPYING, NEWS: new files to follow the GNU standard * benchmarks/*f90.f: renamed to benchmarks/*f90.f90 * examples/complex.cpp: renamed to examples/complex-test.cpp * testsuite/complex.cpp: renamed to testsuite/complex-test.cpp due to interference with #include<complex> * Makefile.in, aclocal.m4, configure, benchmarks/Makefile.in, bin/Makefile.in, blitz/Makefile.in, blitz/array/Makefile.in, blitz/generate/Makefile.in, blitz/meta/Makefile.in, compiler/Makefile.in, demos/Makefile.in, examples/Makefile.in, lib/Makefile.in, manual/Makefile.in, manual/examples/Makefile.in, manual/stencils/Makefile.in, random/Makefile.in, src/Makefile.in, testsuite/Makefile.in: regenerated files from Makefile.am generated by running automake (GNU automake) 1.4a * manual/examples/Makefile, manual/stencils/Makefile: removed, now generated by configure * CHANGELOG: renamed to ChangeLog.1 * manual/examples/*.out: renamed to manual/examples/*.log due to interference with automake * compiler/elabbase.cpp: bar() replaced by this->bar() in zowee() const for ANSI C++ correctness (14.6.2(3) in the C++ Standard) * src/globals.cpp: char* _blitz_id replaced by char _blitz_id[] * random/uniform.h: irng_.random() replaced by this->irng_.random() everywhere for ANSI C++ correctness (14.6.2(3) in the C++ Standard) * random/discrete-uniform.h: likewise * random/normal.h: getUniform() replaced by this->getUniform() * blitz/array-impl.h: data_ replaced by this->data_ everywhere, changeToNullBlock() replaced by this->changeToNullBlock(), class _bz_endTag replaced by struct _bz_endTag { } declaration * blitz/array/resize.cc: for (d=0; d < N_rank; ++d) replaced by for (int d=0; d < N_rank; ++d) (for scoping) * blitz/array/iter.h: data_ replaced by this->data_ in template<class T, int N> class ArrayIterator : public ConstArrayIterator<T,N> {}, removed struct _bz_endTag { }; declaration * blitz/array/io.cc: added typename (_bz_typename) qualifier to the iterator and const_iterator of Array<T_numtype,N_rank> * blitz/ops.h: os replaced by str in the BitwiseNot template * blitz/vector.h: data_ replaced by this->data_ everywhere * blitz/array/slicing.cc: likewise * blitz/array/eval.cc: likewise * blitz/array/methods.cc: data_ replaced by this->data_ everywhere numReferences() replaced by this->numReferences() * blitz/vector.cc: data_ replaced by this->data_ everywhere, numReferences() by this->numReferences() * blitz/matrix.cc: data_ replaced by this->data_ * blitz/matrix.h: likewise everywhere * blitz/promote.h: typename replaced by _bz_typename * blitz/array/reduce.cc: TinyVector<int,rank> replaced by TinyVector<int,T_expr::rank> * blitz/array/storage.h: in template<int N_rank> class FortranArray : public GeneralArrayStorage<N_rank> {} and template<int N_rank> class ColumnMajorArray : public GeneralArrayStorage<N_rank> {} ordering_, ascendingFlag_, base_ replaced by this->ordering_, this->ascendingFlag_, this->base_ noInitializeFlag() replaced by GeneralArrayStorage<N_rank>::noInitializeFlag() * blitz/array/where.h: minmax::max(minmax::max(stride1,stride2),stride3) replaced by stride1>(stride2=(stride2>stride3?stride2:stride3))?stride1:stride2 * blitz/transversal.cc, blitz/transversal.h: template declaration template<int N_dimensions> _bz_typename TraversalOrderCollection<N_dimensions>::T_set TraversalOrderCollection<N_dimensions>::traversals_; in blitz/transversal.cc moved before template specialisation template<> class TraversalOrderCollection<0> {} in blitz/transversal.h * blitz/array/fastiter.h: for BZ_HAVE_STD only #include <strstream> replaced by #include <sstream> ostrstream ostr replaced by ostringstream ostr * testsuite/matthias-troyer-1.cpp, testsuite/matthias-troyer-2.cpp: removed unnecessary includes for iostream.h and complex.h * examples/cfd.cpp: added #ifdef BZ_HAVE_STD for #include <fstream> * examples/haney.cpp: likewise for #include<valarray> * blitz/vecexpr.h: (re)inserted includes for vecbops, vecuops and vecbfn in order to compile testsuite/tinyvec.cpp * benchmarks/ct.cpp: removed (output of g++ -E) * benchmarks/acou3db4.cpp: corrected typo in #include <blitz/array/stencil.h>, should be #include <blitz/array/stencils.h> * benchmarks/acou3d.cpp: added #include <blitz/traversal.h> for call to generateFastTraversalOrder function * benchmarks/stencil.cpp: likewise * blitz/memblock.h: in the constructor MemoryBlock(size_t length, T_type* _bz_restrict data) dataBlockAddress_ = data replaced by dataBlockAddress_ = 0 as it was before. (testsuite/extract does not crash then) * testsuite/matthias-troyer-2.cpp: changed the statement A = exp(c * (sqr(i-midpoint) + sqr(j-midpoint) + sqr(k-midpoint))); by A = zip( exp(c * (sqr(i-midpoint) + sqr(j-midpoint) + sqr(k-midpoint))), 0.0, complex<double>()); Still a problem with the complex stencil, right now the statement applyStencil(kinEnergy(),A,B); is commented |