Home | Back
1999-04-19  David Mosberger-Tang  <David.Mosberger@acm.org>

	* Version 1.0.1 released.

	* backend/artec.c (attach): Applied patch by Petter to fix URL in
	debug output.

	* backend/microtek2.c (chunky_proc_data): Apply Bernd's latest
	patch to fix some color problems.

1999-04-17  David Mosberger-Tang  <David.Mosberger@acm.org>

	* Patch by Mikko Työläjärvi:
	* sanei/sanei_scsi.c: Check for cam_devices[fd]==NULL, not !=NULL.

	* Patch from Petter:
	* config.guess: Update to latest version.
	* config.sub: Update to latest version.
	* config.install-sh: Update to latest version.
	* mkinstalldirs: Update to latest version.

1999-04-12  David Mosberger-Tang  <David.Mosberger@acm.org>

	* doc/sane-dc25.man: Apply fixes by Peter Fales
	* backend/dc25.c: Apply patch by Peter Fales.

1999-04-11  David Mosberger-Tang  <David.Mosberger@acm.org>

	* include/sane/config.h.in: Declare return type of strdup(),
	strndup(), and strsep() if these functions are not part of the
	standard libc.  This breaks the GNU convention of not declaring
	standard C library functions but is required in these cases
	because the functions return pointers.  On a 64 bit platform, bad
	code is generated if a function is (implicitly) declared to return
	an "int" and then returns a pointer.  To minimize the risk of
	compile errors due to conflicting prototypes, we don't specify a
	prototype though (just the return type).

	* backend/dll.conf: Comment out dc25 and dc210 backends as those
	are VERY slow to initialize when no camera is attached.

	* backend/epson.desc: Add Epson GT-7000.

1999-04-06  David Mosberger-Tang  <David.Mosberger@acm.org>

	* backend/sharp.c (sane_read_shuffled): Declare as "static".
	(sane_read_direct): Ditto.
	Applied latest patch by Kazuya and Abel.

	* sanei/sanei_scsi.c [USE == FREEBSD_CAM_INTERFACE]: Fix bugs
	(patch by Mikko Tyo"la"ja"rvi <mikko@securitydynamics.com>).

	* backend/snapscan.c (start_reader): Don't redirect scanner file
	descriptor to fd 0 (needlessly breaks FreeBSD and other platforms
	that don't use real file descriptors for the scanner.

	* backend/microtek2.c: Apply Bernd's patch to fix "green-ness"

	* backend/umax.BUGS: Applied Oliver's latest patch.
	* backend/umax.CHANGES: Ditto.
	* backend/umax.FAQ: Ditto.
	* backend/umax.TODO: Ditto.
	* backend/umax.c: Ditto.
	* backend/umax.desc: Ditto.
	* doc/sane-umax-doc.html: Ditto.
	* doc/sane-umax-doc.tex: Ditto.
	* doc/sane-umax-doc.man: Ditto.
1999-04-06  Petter Reinholdtsen <pere@td.org.uit.no>

	* backend/snapscan.c (sane_exit sane_get_devices): Removed memory
	(sane_open): Give more sensible error message when unable to open
	temp file.  Open temp file in /var/tmp, not in current directory.
	(mini_inquiry add_device): Make sure to only match listed models.
  	Earlier, substrings would also match.

	* backend/snapscan.c (sane_snapscan_*): Changed API entries from
	sane_snapscan_* to sane_*.

	* backend/snapscan.c (add_device init_options inquiry
 	sane_snapscan_get_parameters sane_snapscan_start
 	sane_snapscan_set_io_mode sane_snapscan_read) backend/snapscan.h
 	backend/snapscan.desc: Rewrote scanner detection code to loop over
 	array of supported SCSI names.  Added AGFA SnapScan 1236s support.
  	It seems to be compatible with SnapScan 600.
	Make sure to not add the same device more then once to the device
 	list.  Bugfix in sane_snapscan_read() triggered on EOF.

1999-04-04  David Mosberger-Tang  <David.Mosberger@acm.org>
	* PROBLEMS: Note that /proc/sys/kernel/sg-big-buff is available
	since Linux kernel v2.2.

	* backend/agfafocus.desc: Changed status from "new" to "alpha".
	* backend/hp.desc: Ditto.

	* backend/microtek2.desc: Increase version number to 0.6.

1999-04-04  Petter Reinholdtsen <pere@td.org.uit.no>
	* PROBLEMS:  Updated note on SG_BIG_BUF.
	* tools/README: Corrected typo.  Added some notes on
	* tools/mustek600iin-off.c: Remove hardcoded path to mustek.conf.

1999-04-03  David Mosberger-Tang  <David.Mosberger@acm.org>

	* include/sane/sanei_debug.h: Define sanei_debug_BACKEND_NAME only
	if STUBS is not defined.

	* backend/microtek2.h: #ifdef out do_dummy_scan.

	* backend/Makefile.in (V_REV): New variable.

	* configure.in (V_REV): New variable.
	(VERSION): Include ${V_REV} in vesion number.
	Substitute V_REV.
	* backend/umax.c (umax_do_request_sense): Make "static".

	* backend/canon.h: Move array "option_name"...
	* backend/canon-sane.c: ...to here and make "static".

	* backend/pnm.c: Rolled back to version that shipped with
	sane-0.74.  The scan area options were not well implemented.  If
	someone wants to fix that code, the previous (unreliable) version
	of the PNM backend is in backend/pnm.c-bad.

	* doc/sane.tex (subsection{Resolution Option}: Remove section
	4.5.5---it was a duplicate of section 4.5.2 (Scan Resolution

	* backend/microtek2.c (chunky_proc_data): Merge in latest changes
	from Bernd.

1999-04-02  David Mosberger-Tang  <David.Mosberger@acm.org>

	* backend/net.c (sane_control_option): Ignore the option size
	of BUTTONs and GROUPs as required by section 4.2.9.  (Bug
	reported by Nick Lamb).

	* frontend/xscanimage.c (null_print_func): Declare MSG param
	as "const" to match declaration of glib-1.2.1.

	* backend/ricoh.c (attach_one): return SANE_STATUS_GOOD.

	* backend/microtek2.c (do_dummy_scan): #ifdef out since it
	seems to be used for debugging only.

	* backend/hp-option.c (_probe_int): Needed only if HP_EXPERIMENTAL
	is defined.

	* backend/coolscan.c: Updated with Didier's latest patch.

	* backend/mustek.c: Applied Andreas's latest patch.

	* doc/sane.tex (subsection{Device Descriptor Type}): Add AGFA.

	* doc/net.tex (subsection{Primitive Data Types}): Clarify that
	SANE_Char is encoded as ISO LATIN-1 and describe SANE_String
	encoding (patch by Petter).

	* frontend/saned.c (DBG): Remove extraneous parens around "msg".

	* AUTHORS (Frontends): Update David Skoll's email address.

	* frontend/saned.c (get_free_handle): Check for out of memory
	situations and initialize newly allocated memory.
	(auth_callback): Fail when we can _not_ authorize (i.e.,
	!can_authorize), not the other way round.
	(quit): Make sure quit() gets executed only once.

	* backend/microtek2.c: Updated with Bernd's latest version.
	* backend/microtek2.h: Ditto.

	* backend/st400.desc: New file.

	* backend/epson.c (sane_open): Check for NULL or empty
	dummy_dev.sane.name to avoid segfaults.  (Suggested by Yuri

	* sanei/sanei_scsi.c [USE = LINUX_INTERFACE]: Make "cdb" last
	member in "struct req" and change size of "data" to 1 byte to
	allow dynamic sizing of data buffer based on the value of
	(sanei_scsi_req_enter): Calculate size of request based on
	sanei_scsi_max_request_size.  A similar patch was proposed
	by Petter Reinholdtsen.

1999-03-13  Petter Reinholdtsen  <pere@td.org.uit.no>

	* doc/saned.man: More info on how to use tcp_wrapper for access

1999-03-08  David Mosberger-Tang  <David.Mosberger@acm.org>

	* backend/microtek2.c (sane_get_select_fd): Remove bogus cast.
	Reported by Petter Reinholdtsen.

	* sanei/sanei_config.c: Include <sane/config.h>.

	* frontend/saned.c: Include <sys/types.h>.

	* configure.os2 (LN_S): Updated with Yuri's latest version.

	* backend/Makefile.in (install): Use $(LN_S) instead of ln -s.
	(libsane-dll.la): Make dependent on $(DLL_PRELOAD_EXTRAS).
	(libsane-hp.la): Make dependent on sanei_pio.lo.

	* backend/hp.c (PATH_MAX): Define PATH_MAX if necessary.

	* backend/hp-scl.c (sanei_hp_scsi_pipeout): Add SIGXCPU, SIGXFSZ,
	and SIGVTALRM only if defined.

	* backend/dc25.c (PATH_MAX): Define PATH_MAX if necessary.
	(sane_init): Move up fclose(fp) to avoid segfault when fp==NULL.
	* backend/dc210.c (sane_init): Ditto.

	* backend/pnm.c: Apply Oliver's 4-liner to make TLX, TLY, BRX, and
	BRY advanced options.

	* backend/umax.c: Updated with Oliver's latest version.
	* doc/sane-sharp.man: New file (by Kazuya Fukuda).
	* backend/sharp.c: Updated with Kazuya's latest version.
	* backend/sharp.h: Ditto.
	* backend/sharp.desc: Ditto.

1999-03-04  David Mosberger-Tang  <David.Mosberger@acm.org>

	* backend/canon.c (adjust_hilo_points): Print values of type
	size_t as described in backend/GUIDE..

	* backend/canon-scsi.c: Comment out unused code.

	* backend/canon.c: Updated with Manuel Panea latest version.

	* Irix patches from Michael Sweet:

	* sanei/sanei_scsi.c (sanei_scsi_find_devices): Update with
	Michael's latest version.
	* configure.in (CPPFLAGS): Don't check for libnsl or libsocket on
	(CPPFLAGS): Check for cfmakeraw.
	* backend/sharp.h (mode_select_param): Remove double semicolon
	(some compiler's don't grok those in structure declarations).
	* backend/Makefile.in (libsane-abaton.la): Make dependent on
	* backend/dll.conf: Enable net backend, disable pnm backend by
	default to lessen risk of confusing novice users.
	* backend/abaton.c (sane_read): Change type of "size" from ssize_t
	to size_t.
	* backend/apple.c (sane_read): Ditto.

1999-03-02  David Mosberger-Tang  <David.Mosberger@acm.org>

	* backend/Makefile.in (EXTRA_dc210): New macro.

	* sanei/sanei_ab306.c: Apply usleep() patch by Andreas

	* backend/hp.c: Updated with Peter's latest version (v.082).

1999-03-01  David Mosberger-Tang  <David.Mosberger@acm.org>

	* include/sane/sanei_net.h: Changed copyright on this file (and
	this file only!) to be public domain (same as sane.h).  This helps
	ensuring that independent network implementations remain

1999-02-28  David Mosberger-Tang  <David.Mosberger@acm.org>

	* backend/sharp.c: New file by FUKUDA Kazuya
	* backend/sharp.h: Ditto
	* backend/sharp.conf: Ditto.
	* backend/sharp.desc: Ditto.

	* include/sane/sanei_debug.h: Define sanei_debug_BACKEND_NAME
	only if BACKEND_NAME is defined.

	* tools/find-scanner.c (main): Add NetBSD device names (patch by
	Taniguchi Shinya <Taniguchi.Shinya@exc.epson.co.jp>).

	* backend/epson.c (attach): Recognize Perfection636 scanner.
	Suggested by Svend Daugaard Pedersen <sdp@vip.cybercity.dk>.

	* backend/abaton.c (attach_one): Move past attach() to avoid

	* backend/umax.c (umax_do_request_sense): Make static.

	* backend/snapscan-310.c (rgb_buf_can_get_line): Make static.
	(rgb_buf_init): Ditto.
	(rgb_buf_clean): Ditto.
	(rgb_buf_push_line): Ditto.
	(rgb_buf_get_line): Ditto.
	(rgb_buf_set_diff): Ditto.
	(transfer_data_diff): Ditto.

	* backend/snapscan.c (gamma_8): Make static.
	(start_reader): Ditto.
	* backend/microtek.c (do_precalibrate): Make static.
	(finagle_precal): Ditto.
	(pack_flat_data): Ditto.
	(pack_goofyrgb_data): Ditto.
	(pack_into_ring): Ditto.
	(pack_into_dest): Ditto.
	(pack_seqrgb_data): Ditto.
	(ring_alloc): Ditto.
	(ring_expand): Ditto.
	(ring_free): Ditto.
	(set_pass_parameters): Ditto.

	* backend/epson.c (epson_cmd): Make static.

	* backend/dc25.c (pp): Make static.
	(tmpname): Ditto.
	(tmpnamebuf): Ditto.
	(tty_baud): Ditto.

	* backend/artec.c (artec_get_status): Make static.
	(attach_one): Ditto.
	(cap_data): Ditto.

	* backend/abaton.c (mode_update): Make mode_update() static.
	* backend/apple.c (mode_update): Ditto.
	(gamma_update): Make static.
	(xquant): Ditto.
	(yquant): Ditto.

	* backend/microtek2.c: Updated with Bernd's v0.6.
	Add missing include of <errno.h>.

	* backend/microtek2.h: Ditto.
	* backend/microtek2.conf: Ditto.

1999-02-27  David Mosberger-Tang  <David.Mosberger@acm.org>

	* frontend/preview.c (preview_scan): Fix dpi calculation by
	replacing gwidth by gheight.  Reported by Manuel Panea.

	* doc/sane-net.man: Change service name from "saned" to "sane".

	* sanei/sanei_scsi.c (MAX_DATA) [FREEDBSD_CAM_INTERFACE]:  Change
	Parag Patel <parag@cgt.com>.

	* AUTHORS (Backends): Updated Peter's email address.

	* PROJECTS: Updated Peter's home page URL.

	* backend/snapscan.c (EXPECTED_MAJOR): Update EXPECTED_MAJOR to 1.

	* include/sane/sane.h (SANE_CURRENT_MAJOR): SANE_CURRENT_MAJOR and
	V_MAJOR HAVE to be in sync, so I'm forced to fix SANE_CURRENT_MAJOR
	now.  Embarassing, but fortunately only the snapscan backend seems
	affected by this change.

	* backend/dll.c (load): Use SANE_CURRENT_MAJOR, not V_MAJOR (the
	latter is used for shared lib versioning).

	* tools/find-scanner.c (main): Make verbose output a bit
	friendlier (patch by Petter).

	* backend/umax.c: Updated with Oliver's latest version (v1.0c).

	* Patch by Mike Sweet: * backend/Makefile.in (libsane-ricoh.la):
	Make dependent on sanei_config2.lo.  * sanei/sanei_scsi.c
	(sanei_scsi_find_devices): New function.
	(WE_HAVE_FIND_DEVICES): Define.  * frontend/saned.c (check_host):
	A "+" in saned.conf now matches any remote host (may be a bit
	dangerous, so use this judiciously).  * frontend/gtkglue.c:
	Include <string.h>.  * backend/hp-accessor.c (hp_data_alloc):
	Round size up to a multiple of sizeof(long) to avoid alignment
	problems.  * backend/abaton.h: Remove extraneous comma in enums.
	* backend/artec.conf: Add "scsi ULTIMA" line.  *
	backend/abaton.conf: Add "scsi ABATON" line.  *
	backend/epson.conf: Add "scsi EPSON" line.  * backend/ricoh.conf:
	Add "scsi RICOH IS60" line.  * backend/snapscan.conf: Add "scsi
	AGFA" and "scsi COLOR" line.  * backend/tamarack.conf: Add "scsi
	TAMARACK" line.  * backend/abaton.c (sane_init): Fix fall back
	code to attach /dev/scanner when ABATON_CONFIG_FILE doesn't exist.
	(sane_init): Use sanei_config_attach_matching_devices().
	(attach_one): New function.
	* backend/hp-device.c (sanei_hp_device_probe): Mention model

	* backend/saned.conf: Remove the stale comments about hostname
	matching being case-sensitive.

	* backend/microtek.h: Updated with Matto's v0.10.1.

	* backend/mustek.c (send_gamma_se): Apply patch by Wilco Oelen
	<woelen@noord.bart.nl> to clip gamma values to range 0..255.

	* backend/artec.desc: Updated with Chris Pinkham's latest version.

	* backend/umax.c (PATH_MAX): Do conditional define of PATH_MAX
	_after_ including all the headers to avoid "duplicate define"
	warning message.

	* backend/ricoh.h: Include <sane/config.h> to get #define for
	"inline" if necessary.

	* backend/dc210.c (init_dc210): To send break, use tcsendbreak()
	if available or TCSBKRP or TCKSBRK ioctl() if available or fall
	back to doing nothing if none of these are supported.  This may
	cause the backend to work incorrectly on platforms that do not
	support one of the above methods for sending a break, but at least
	it will compile that way.

1998-12-12  David Mosberger-Tang  <David.Mosberger@acm.org>

	* backend/hp.desc: Updated with Peter's latest version.

1998-11-30  David Mosberger-Tang  <David.Mosberger@acm.org>

	* LICENSE (terms): Add a pointer to backend/djpeg.README.gz.

	* backend/djpeg.README.gz: New file (required to comply with JPG
	licensing restriction).

	* backend/snapscan.c (sane_snapscan_start): Use INT_MAX instead
	of non-portable MAXINT.
	Don't include Linux-specific <values.h>.

1998-11-26  David Mosberger-Tang  <David.Mosberger@acm.org>

	* doc/sane.tex (subsection{Device Descriptor Type}): Consistently
	use "Noname" (instead of None/Noname) to indicate the absence of
	a vendor.
	(subsection{sane_strstatus}): Define how long the returned string
	is valid.
	(section{Code Flow}): Clarify that sane_cancel() has to be called
	even if read returns SANE_STATUS_EOF.

1998-11-22  David Mosberger-Tang  <David.Mosberger@acm.org>

	* backend/ricoh.h (_4btol): Replace "__inline" by "inline".

	* backend/abaton.c (sane_control_option): Assign word values to
	s->val[foo].w not s->val[foo].  The latter compiles on gcc-
	without warning but causes an error on other compilers (e.g.,
1998-11-21  David Mosberger-Tang  <David.Mosberger@acm.org>

	* Version 1.0 released

	* From Brian J. Murrell:
	* backend/dll.conf: Mention dc210.

	* backend/cderror.h: New file.
	* backend/jinclude.h: Ditto.
	* backend/djpeg.c: Ditto.
	* backend/dc210.desc: Ditto.
	* backend/dc210.h: Ditto.
	* backend/dc210.c: Ditto.
	* backend/cdjpeg.h: Ditto.

	* doc/Makefile.in (SECT5): Mention sane-abaton.5.
	* doc/sane-abaton.man: New file.
	* backend/abaton.c: Ditto.
	(wait_ready): Explicitly cost tv_sec member to (long) in order
	to print it (avoids warning on platforms where tv_sec is not a long).

	* backend/abaton.h: Ditto.
	* backend/abaton.conf: Ditto.
	* backend/abaton.desc: Ditto.
	* backend/dll.conf: Mention abaton.

	* Apollo/DomainOS fixes by Paul Walker:
	* sanei/sanei_DomainOS.h: Add this missing file.
	* sanei/sanei_config2.c: Include <sane/config.h> to get
	u_char defined if necessary.
	* sanei/sanei_DomainOS.c (upper_string): Delete.
	(do_help): Ditto.
	* include/sane/config.h.in: Add #undef HAVE_SYS_TIME_H.

	* lib/usleep.c [HAVE_SYS_TIME_H]: Include <sys/time.h> only if
	we have it.

	* configure.in (CPPFLAGS): Check for sys/time.h.

	* frontend/gtkglue.c: Move include of <sys/types.h> in front
	of include of <sys/stat.h>.

	* config.sub: Apply patch to recognize -sys5.3.

	* backend/microtek.c: Applied Matto's latest patch to upgrade
	backend from v0.9 to v0.10.

1998-11-04  David Mosberger-Tang  <David.Mosberger@acm.org>

	* backend/microtek2.desc: Mention ScanMaker X6 and Phantom 636.

	* backend/microtek2.c (check_inquiry): Mention Phantom 636 in
	model string.

1998-11-03  David Mosberger-Tang  <David.Mosberger@acm.org>

	* backend/microtek2.c (check_inquiry): Added patch by Sebastian
	Erdmann <serdmann@cs.tu-berlin.de> to recognize ScanMaker X6.

1998-11-02  David Mosberger-Tang  <David.Mosberger@acm.org>

	* backend/artec.c: Print size_t as recommended in backend/GUIDE.

1998-11-02  Chris Pinkham <cpinkham@infi.net>

	* backend/artec.c: changes to correct bugs when using AT12.
	(sense_handler): New function (by Dick Bruijn).
	(wait_ready): Ditto (by Dick Bruijn).
	(abort_scan): Ditto (by Dick Bruijn).
	Support added to read capability data from scanner if the model.
	Supports this command (by Dick Bruijn).
	Added call to sanei_scsi_close() if detected scanner is not
	a Artec/Ultima model (by Francois Ouellet).
	Added Negative option.  Added Halftone Pattern option.
	Added Filter Type option for mono scans.
	Added Quality Calibration option.
	Moved test_unit_ready command till AFTER we check for ULTIMA scanner.

1998-11-02  David Mosberger-Tang  <David.Mosberger@acm.org>

	* config.guess: Upgrade to libtool v1.2.
	* config.sub: Ditto.
	* ltconfig: Ditto.
	* ltmain.sh: Ditto.

1998-10-29  David Mosberger-Tang  <David.Mosberger@acm.org>

	* backend/mustek.c (encode_resolution): If MUSTEK_FLAG_DOUBLE_RES
	is set, use resultion encoding reported by
	(attach): Set MUSTEK_FLAG_DOUBLE_RES for MSF-06000CZ.  Do other
	models need this, too?
	(calibration): Declare NUM as size_t, not int.  #ifdef out this
	unused routine.
	(reader_process): Print size_t values as %lu with explicit cast
	to u_long.

	* backend/mustek.h (MUSTEK_FLAG_DOUBLE_RES): New flag.

	* backend/mustek.c (init_options): Initialize resolution with 18
	dpi, not 100dpi so that "scanimage" without options gives a
	preview-quality image that doesn't take much space or time.

	* backend/mustek.c: Updated with Andreas Bolsch's version (adds
	support for SE models).
	* backend/mustek.h: Ditto.
	* backend/mustek.spec: Ditto.

	* backend/pnm.c (sane_read): Replace C++ comment with C comment.

	* backend/microtek2.c: Updated with Bernd's v0.5.
	* backend/microtek2.h: Ditto.
	* backend/microtek2.conf: Ditto.

	* backend/umax.c: Updated with Oliver's latest version.
	* backend/umax.h: Ditto.
	* backend/umax-scsidef.h: Ditto.
	* backend/umax-scanner.h: Ditto.
	* backend/umax-uc630.h: Ditto.
	* backend/umax-uc840.h: Ditto.
	* backend/umax-ug630.h: Ditto.
	* backend/umax-ug80.h: Ditto.
	* backend/umax-uc1200s.h: Ditto.
	* backend/umax-uc1200se.h: Ditto.
	* backend/umax-uc1260.h: Ditto.
	* backend/umax.conf: Ditto.
	* include/sane/saneopts.h: Ditto.
	* doc/sane-umax-doc.html: Ditto.
	* doc/sane-umax-doc.tex: Ditto.
	* doc/sane-umax.man: Ditto.

1998-10-28  David Mosberger-Tang  <David.Mosberger@acm.org>

	* doc/sane.tex (subsection{sane_control_option}): Clarify that
	paramter "v" is ignored for SET_AUTO calls.

	* frontend/saned.c (init): Initialize w->version.

	* backend/net.c (connect_dev): Accept version code 2 and
	set peer's version code in dev->wire.version.

	* include/sane/sanei_wire.h: New member "version".

	* sanei/sanei_net.c (sanei_w_control_option_req): Encode
	option value only if peer_version is < 3 or if action is

	* include/sane/sanei_net.h (SANEI_NET_PROTOCOL_VERSION): Up
	protocol version to version 3.

	* sanei/sanei_net.c (sanei_w_control_option_req): Transcode
	value_type, value_size, and value only if req->action !=
	SANE_ACTION_SET_AUTO.  Reported by Petter Reinholdtsen.

	Patches by Petter Reinholdtsen <pere@hungry.com>:

	* backend/dmc.c (attach_one): Don't use C++-style comments.

	* backend/dc25.h (DEFAULT_TTY_BAUD): New macro.  Move SPEEDS macro
	to dc25.c.

	* backend/dc25.c: Initialize tty_baud to DEFAULT_TTY_BAUD.  Use
	B57600 and B115200 only if defined.

	* doc/saned.man: Mention that hostname matching no longer is case

	* configure.in
	(lib/Makefile.in,lib/strcasecmp.c,frontend/saned.c): Use
	strcasecmp() instead of strcmp to compare DNS hostnames.  Case is
	irrelevant when using DNS.

	* backend/dll.c: Add support for HP-UX 10.xx style shared

	* configure.in include/sane/config.h.in backends/dll.c:
	Use dhl_load() family for DLL support on HP/UX.

	* backend/snapscan.c (sane_snapscan_open): Don't cast lvalue
	(illegal according to ANSI C, I think).

	* backend/apple.c (init_options): Add explicit "break" after
	"default:" to make HP-UX compiler happy (?).
	(sane_read): Make stuff after #endif a comment.

	* backend/agfafocus.c: New file (by Karl Anders Oygard
	* backend/agfafocus.h: Ditto.
	* doc/sane-agfafocus.man: Ditto.

	* doc/sane-net.man: Fix typo: network service is called "sane",
	not "saned" (by Andreas Dilger <adilger@enel.ucalgary.ca>).

	* backend/hp-scl.c (sanei_hp_scsi_pipeout): Use SIGPWR only if its
	defined (by Peter Kirchgessner).

	* frontend/Makefile.in (INCLUDES): Mention @GTK_CFLAGS@ as part of
	INCLUDES macro instead of CFLAGS.  Despite its name, @GTK_CFLAGS@
	is guaranteed to contain CPP include directives only.  (Reported
	by Kevin Dalley <kevind@rahul.net>.)

1998-10-27  David Mosberger-Tang  <David.Mosberger@acm.org>

	* sanei/sanei_scsi.c (sanei_scsi_open): Return
	SANE_STATUS_ACCESS_DENIED if open() fails with errno==EACCES.

	* backend/ricoh-scsi.c: #ifdef out unused code and print values of
	type size_t as prescribed in the file backend/GUIDE.

	* backend/dll.conf: Mention Ricoh backend.

	* backend/ricoh.c: New file (by Ricoh Dillema).
	* backend/ricoh.h: Ditto..
	* backend/ricoh-scsi.c: Ditto..

	* backend/microtek.c: Apply Aug 7 patch by Matto Marjanovic.

	* backend/dc25.c: Apply patch by Peter Fales (v1.1).
	* backend/dc25.desc: Ditto.
	* doc/sane-dc25.man: Ditto.

	* backend/pnm.c: Applied patch by Goran Thyni <goran@bildbasen.se>
	that allows scanning parts of a PNM image.

	* backend/GUIDE: Add Matto's comment on .desc files.

	* backend/hp.c: New file from Peter Kirch (formerly known as xhp).
	* backend/hp.h: Ditto.
	* backend/hp-accessor.h: Ditto.
	* backend/hp-device.h: Ditto.
	* backend/hp-handle.h: Ditto.
	* backend/hp-option.h: Ditto.
	* backend/hp-scl.h: Ditto.
	* backend/hp-scsi.h: Ditto.
	* backend/hp-accessor.c: Ditto.
	* backend/hp-device.c: Ditto.
	* backend/hp-handle.c: Ditto.
	* backend/hp-hpmem.c: Ditto.
	* backend/hp-option.c: Ditto.
	* backend/hp-scl.c: Ditto.
	* backend/Makefile.in (libsane-hp.la): Make libsane-hp.la
	dependent upon hp-accessor.lo, hp-device.lo, hp-handle.lo,
	hp-hpmem.lo, hp-option.lo, and hp-scl.lo.

1998-10-22  David Mosberger-Tang  <David.Mosberger@acm.org>

	* doc/sane-hp.man (Model): Mention HP6200 as per report by Tom
	Martone <tommartone@erols.com>.

1998-07-30  David Mosberger-Tang  <David.Mosberger@acm.org>

	* include/sane/config.h.in: Apply Cory Kempf's
	<ckempf@enigami.com> FreeBSD CAM support patch.
	* sanei/sanei_scsi.c: Ditto.
	* tools/find-scanner.c: Ditto.
	* configure.in: Ditto.

1998-07-27  David Mosberger-Tang  <David.Mosberger@acm.org>

	* Version 0.74 released.

	* configure.in (CPPFLAGS): Save old CPPFLAGS in saved_CPPFLAGS and
	then set CPPFLAGS (not saved_CPPFLAGS!) to include GTK_CFLAGS.
	This should get GIMP detected again.

	* frontend/xscanimage.c (init): Add missing newline.

	* backend/net.c (sane_init): Look for service "sane", not "saned".

	* configure.in (V_MINOR): Make it 74.

	* tools/sane-desc.el: Hack a bit so sane-backends.html can be
	generated some place other than the working directory
	(which may not be writable).

	* tools/sane-desc.el: New file by Matto.

	* doc/Makefile.in (sane-backends-html): New rule to generate

	* backend/apple.desc: List sane-apple man page.

	* backend/umax.c: Updated with Oliver's latest version (with Irix
	4MB workaround).

	* backend/microtek.c: Updated with Matto's v0.9.
	* backend/microtek.h: Ditto.
	* backend/microtek.conf: Ditto.
	* backend/microtek.desc: Ditto.
	* doc/sane-microtek.man: Ditto.

	* backend/apple.h: Updated with Milon's v0.3.
	* backend/apple.c: Ditto.

	* doc/sane-apple.man: New file (contributed by Milon Firirkis).

1998-07-23  David Mosberger-Tang  <David.Mosberger@acm.org>

	* backend/canon-scsi.c (reserve_unit): Don't compile unused

	* sanei/sanei_scsi.c: Apply Yuri's patch to add
	sanei_scsi_find_devices() support to OS/2.

	* sanei/sanei_pio.c: Include <sane/sanei_backend.h> instead of
	just <sanei/sanei_debug.h> so we pick up #define's for inb and

	* include/sane/config.h.in: Mention HAVE_OS2_H and

	* configure.in (AC_CHECK_HEADERS): Mention sys/hw.h and
	(AC_CHECK_LIB): Check for syslog.
	(AC_CHECK_FUNCS): Check for _portaccess.
	(CPPFLAGS): Don't disable qcam backend if we have _portaccess.
	These patches contributed by Yuri for the benefit of OS/2.

	* backend/qcam.c (qc_unlock) [!F_SETLK]: Fall back to convention
	UNIX-style locking using O_EXCL (not ideal, but better than
	nothing at all).
	(qc_lock_wait): Ditto.

	* sanei/sanei_scsi.c (KillDomainServer): Add missing paren.

	* lib/usleep.c [HAVE_SYS_SELECT_H]: Include <sys/select.h>.

	* include/sane/sanei_backend.h: Define i/o-port access
	compatibility macros (by Yuri Dario).

	* backend/Makefile.in (CONFIGS): Mention dummy saned.conf
	(this really ought to go in frontend/Makefile, but I'm too lazy to
	add a configuration-install rule there...).

	* backend/coolscan.c: Update with Didier's latest version.
	(send_one_LUT): Merge in alloca() fix from 1998-04-04.

1998-07-22  David Mosberger-Tang  <David.Mosberger@acm.org>

	* backend/dll.conf: Mention artec backend.

	* backend/mustek.c (sane_start): Remove duplicate status test.

1998-07-21  David Mosberger-Tang  <David.Mosberger@acm.org>

	* frontend/saned.c (main): Look for service name "sane", not

1998-07-20  David Mosberger-Tang  <David.Mosberger@acm.org>

	* backend/epson.c (epson_cmd): Add patch by Holger Frahm
	<frahm@itp.uni-hannover.de> to support GT9500.

	* backend/microtek.c: Update with latest version (v0.8).

	* backend/artec.c (PREFER_PIXEL_MODE): Apply Chris Pinkham's
	6/4/98 patch to add preliminary support for AT6 and AT12 scanner

	* backend/epson.c: Apply Christian Bucher's patch.
	* backend/dc25.h: New file (by Peter Fales <psfales@earthling.net>)
	* backend/dc25.c: Ditto.
	* backend/dc25.conf: Ditto.
	* doc/sane-dc25.man: Ditto.

	* backend/microtek2.c: Replace dynamically sized array with
	alloca() to be ANSI C compliant.

	* backend/epson.c: Replace zero-sized byte arrays with 1 byte
	arrays to be ANSI C compliant.

	* doc/sane-hp.man: Mention ScanJet 3P (reported by Patrick Debois

	* backend/umax.c: Updated with Oliver's 5/7/98 patch.

1998-07-20  Chris Pinkham  <cpinkham@infi.net>

	* backend/artec.c: Added code to default to using millimeters
	instead of pixels for measurements, can revert to pixels by
	defining PREFER_PIXEL_MODE at compilation time.
	Added code to cause sane_read to block until data available to return,
	also buffers as much data as possible before returning.

	Added code to cause sane_read to read as much data from scanner as
	possible for each call, previously would read 1 line max from

	Added code to attempt to detect scanner capabilities from scanner
	if scanner supports this command, it not program has defaults
	coded in for certain scanner models.

	Separated horizontal and vertical resolution settings with ability
	to bind them together.  This still has a bug, so the option is is
	disabled by default until I can get it working correctly.

	Bug-fixes to get backend working properly with xscanimage.
	Added preview mode option.
	Added threshold option.

	* backend/artec.h: Added options codes to go along with options
	added in artec.c file.

1998-07-20  David Mosberger-Tang  <David.Mosberger@acm.org>

	* backend/epson.c (scsi_write): Apply patch by Thomas Bogendoerfer
	<tsbogend@alpha.franken.de> to get Epson backend to work for SCSI
	scanners again.

1998-06-05  David Mosberger-Tang  <David.Mosberger@acm.org>

	* backend/mustek.c (attach): Move dev_wait_ready() after the check
	for a Mustek scanner.  This is to make sure we don't issue any
	command other than INQUIRY to SCSI devices that are not known to
	be Mustek scanners.

1998-05-22  David Mosberger-Tang  <David.Mosberger@acm.org>

	* backend/dmc.c: Updated with David Skoll's latest patch.

	* sanei/sanei_scsi.c (sanei_scsi_find_devices): Declare missing
	findtype arg for dummy sanei_scsi_find_devices().

1998-05-16  David Mosberger-Tang  <David.Mosberger@acm.org>

	* backend/hp.c (attach): Return right after INQUIRY if the device
	doesn't look like an HP scanner.

1998-05-15  David Mosberger-Tang  <David.Mosberger@acm.org>

	* Version 0.73 released.

	* backend/mustek.c (attach): Initialize *devp to 0.

	* configure.in: Use AM_PATH_GTK to figure out if/how to compile
	with gtk libs.

	* aclocal.m4: Include gtk.m4 from gtk-1.0.1 distribution.

	* backend/Makefile.in (install): Change install rule so there is
	guaranteed to be a (symlink) of the form
	libsane-$(BACKEND).so.$(V_MAJOR) pointing to the right version
	of a dll.

	* backend/dll.c (load): Get rid of .la parsing non-sense.  Instead,
	always attempt to open libsane-$(BACKEND).so.$(V_MAJOR).

	* backend/mustek.c (sane_init): Make sure empty lines really
	are ignored.

1998-05-13  David Mosberger-Tang  <David.Mosberger@acm.org>

	* backend/microtek2.conf: Add line "scsi * * Scanner".
	* backend/microtek.conf: Ditto.

	* sanei/sanei_scsi.c (get_devicename): New function.

	* sanei/sanei_config2.c: New file.

	* sanei/Makefile.in (LIBSANEI_OBJS): Mention sanei_config2.

	* sanei/sanei_scsi.c (sanei_scsi_find_devices): New function
	(comes in two flavors: one for Linux, one for the remaining

	* include/sane/sanei_scsi.h: New function.

	* doc/sane-dll.man: Fix to make it work with man2html (use
	\- instead of -).
	* doc/sane-dmc.man: Ditto.
	* doc/sane-epson.man: Ditto.
	* doc/sane-hp.man: Ditto.
	* doc/sane-microtek.man: Ditto.
	* doc/sane-microtek2.man: Ditto.
	* doc/sane-mustek.man: Ditto.
	* doc/sane-pint.man: Ditto.
	* doc/sane-scsi.man: Ditto.
	* doc/sane-umax.man: Ditto.
	* doc/saned.man: Ditto.
	* doc/scanimage.man: Ditto.
	* doc/xscanimage.man: Ditto.

	* doc/Makefile.in (MAN2HTML): New macro.
	(html-man): New rule to generate HTML version of man-pages.

	* configure.in (V_MINOR): Up to 73.

	* backend/umax.conf: Add lines "scsi UMAX" and "scsi LinoHell

	* backend/microtek2.h: New file (by Bernd Schroeder
	* backend/microtek2.c: Ditto.
	* backend/microtek2.conf: Ditto.

	* backend/dll.conf: Mention "microtek2".

	* backend/apple.conf: Add line "scsi APPLE".
	* backend/mustek.conf: Add lines for "scsi MUSTEK" and "scsi

	* backend/apple.c (attach_one): New function.
	(sane_init): Use sanei_config_attach_matching_devices().
	* backend/artec.c: Like for apple.c.
	* backend/canon.c: Ditto.
	* backend/coolscan.c: Ditto.
	* backend/dmc.c: Ditto.
	* backend/epson.c: Ditto.
	* backend/hp.c: Ditto.
	* backend/microtek.c: Ditto.
	* backend/mustek.c: Ditto.
	* backend/s9036.c: Ditto.
	* backend/snapscan.c: Ditto.
	* backend/tamarack.c: Ditto.

1998-05-11  David Mosberger-Tang  <David.Mosberger@acm.org>

	* backend/snapscan.c (sane_snapscan_get_parameters): Always set
	depth of 8.

	* configure.in: Check for gtk_tooltips_set_tips _after_ gtk
	libraries have been located.  (Patch by Jake E. Hamby

1998-05-09  David Mosberger-Tang  <David.Mosberger@acm.org>

	* sanei/Makefile.in (.c.o): Patch by Kaz Sasayama
	<Kaz.Sasayama@hypercore.co.jp>: invoke $(COMPILE) if libtool
	doesn't give us a regular .o file.
	* lib/Makefile.in (.c.o): Ditto.

	* frontend/preview.c (preview_update): Call update_selection() so
	selection is updated when scanwindow geometry changes.  The patch
	from 1998/4/2 never worked satisfactorily (and indeed was never
	enabled in any of the SANE releases).

1998-05-06  David Mosberger-Tang  <David.Mosberger@acm.org>

	* backend/mustek.c (sane_init): Use sanei_config_skip_whitespace()
	to skip whitespace.

1998-05-05  David Mosberger-Tang  <David.Mosberger@acm.org>

	* frontend/xscanimage.c (init): Allow -g as an option.

	* sanei/sanei_config.c (sanei_config_get_string): New function.
	(sanei_config_skip_whitespace): Ditto.

	* backend/umax.c: Updated with Oliver's latest patch.

	* Makefile.in (INSTALLED_INCLUDES): Mention sanei_readproc.h.

	* backend/microtek.h: Updated with Matto's 0.7 patch.
	* doc/sane-microtek.man: Ditto.
	* backend/microtek.c: Ditto.
	Added precalibration code:  tries to intelligently have scanner
	run a calibration only once when necessary --- this shaves a solid
	six seconds off every scan!
	Added model code/vendor name for ScanMaker 600ZS.
	Added model codes/vendor name for Agfa Arcus II, StudioScan,
	StudioScan II.
	Patched up 3-pass scanning (forgot to switch color planes).
	Corrected IIHR to 600dpi base resolution.
	Check so that 0x0 regions are recognized as invalid.
	Fixed subtle buffering bug in color scans.
	Fixed-up active/inactive dependencies among options.
	Make sure shadow <= midtone <= highlight.
	Let shadow/midtone/hightlight be active during LineArt and Halftone.
	"Halftoning" option moved into Scan Mode Group (from Enhancement).
	Removed some illegal "TEST_UNIT_READY" commands (during scan).
	Removed "MODE_SENSE_1", since it didn't quite work anyway.

1998-05-03  David Mosberger-Tang  <David.Mosberger@acm.org>

	* frontend/xscanimage.c (scan_preview): Don't register
	preview_window_destroyed as a delete_event handler.

1998-05-02  David Mosberger-Tang  <David.Mosberger@acm.org>

	* backend/Makefile.in: Remove unused LIBLIB macro.

1998-04-30  David Mosberger-Tang  <David.Mosberger@acm.org>

	Patches by Matto Marjanovic:

	* frontend/gtkglue.c (gsg_close_dialog_callback): Remove
	client_data pointer arg.

	* frontend/xscanimage.c (scan_win_delete): Remove GdkEvent arg.
	(preview_window_destroyed): Ditto.
	(input_available): Include bad_depth handling code only if
	HAVE_LIBGIMP_GIMP_H is defined.
	(scan_dialog): Remove client_data pointer arg.

1998-04-29  David Mosberger-Tang  <David.Mosberger@acm.org>

	* frontend/gtkglue.c (gsg_get_filename): Use gtk_events_pending()
	instead of gdk_events_pending().
	* frontend/preview.c (input_available): Ditto.
	* frontend/xscanimage.c (quit_xscan): Ditto.
	(input_available): Ditto.

1998-04-08  David Mosberger-Tang  <David.Mosberger@acm.org>

	* sanei/sanei_pio.c (sanei_pio_open): Fix prototype.

1998-04-07  David Mosberger-Tang  <David.Mosberger@acm.org>

	* Version 0.72 released.

	* backend/epson.c (sane_init): Fix up config file reading
	to be more like that of other backends.

	* backend/canon.c (sane_init): Read & process canon.conf (patch by
	Yuri Dario <mc6530@mclink.it>).

1998-04-06  David Mosberger-Tang  <David.Mosberger@acm.org>

	* sanei/sanei_init_debug.c (sanei_init_debug): Move up #endif
	so NULL-test works for OS/2, too.

	* frontend/saned.c: Include <sys/types.h>.

	* backend/snapscan.c: Don't include non-ANSI <values.h>.
	(sane_snapscan_start): Use INT_MAX instead of MAXINT.
	(PATH_MAX): Define PATH_MAX as 1024 if not defined otherwise.

1998-04-05  David Mosberger-Tang  <David.Mosberger@acm.org>

	* backend/umax.c: Updated with Oliver's latest version

1998-04-04  David Mosberger-Tang  <David.Mosberger@acm.org>

	* backend/coolscan.c: Do lalloca.h spiel instead of including

	* configure.in: Look for glib/include directory in /usr/local/lib
	and /usr/lib.  Add $C_SWITCH_X_SITE to CPPFLAGS, not DEFS.

	* doc/sane-mustek.man: Mention MFS-1200SP v1.07 as working as
	reported by ehramm@dk3uz.hh.provi.de (Edmund H. Ramm).

1998-04-03  David Mosberger-Tang  <David.Mosberger@acm.org>

	* backend/canon-scsi.c (request_sense): ifdef out to quiet down

	* backend/artec.c (read_data): Print size_t as (u_long) to make it
	work right and without compiler warning both on 32 and 64 bit
	(artec_get_status): Ditto.
	(init_and_start_scan): Ditto.
	(sane_start): Ditto.
	(sane_read): Ditto.
	(artec_buffer_line_offset): Declare LEN as size_t.
	* backend/epson.c (sane_read): Ditto.

	* sanei/sanei_pio.c (pio_wait): Initialize STAT with 0 to quiet
	down gcc.

	* backend/Makefile.in (libsane-epson.la): Mention sanei_pio.lo.
	(libsane-dll.la libsane.la): Ditto.

	* sanei/Makefile.in (LIBSANEI_OBJS): Mention sanei_pio.o.
	(LIBSANEI_LTOBJS): Mention sanei_pio.lo.

	* frontend/xcam.c (input_available): Undo braindamage regarding
	break out of scan loop (the SANE docs _do_ specify that in
	blocking mode, *len==0 implies end of scan).
	* frontend/xscanimage.c: Ditto.

	* doc/sane-dmc.man: New file by David Skoll.

	* sanei/sanei_DomainOS.c: New file by Paul Walker.

	* backend/snapscan.c (DL_INFO, DL_MAJOR_ERROR): Up error code to 1
	to avoid printing anything unless the user specifically asked
	for this.

	* include/sane/sanei_debug.h (DBG_LEVEL): Define debug level
	variable as macro DBG_LEVEL.

	* README.solaris (NOTE): Emphasize that generic scsi driver
	needs to be installed before running configure.

	* backend/s9036.c: Don't depend on GNU C dynamically sized arrays.
	* backend/coolscan.c (send_one_LUT): Use alloca() instead of
	depending on GNU C dynamically sized arrays.
	Include <alloca.h>.

	* frontend/xscanimage.c (input_available): Break out of the
	loop only if LEN==0 _and_ we have a non-negative input tag.
	* frontend/xcam.c (input_available): Ditto.

	* backend/microtek.c (parse_inquiry): Handle for ScanMaker 35t+.
	(id_microtek): Ditto.

1998-04-02  David Mosberger-Tang  <David.Mosberger@acm.org>

	* configure.in (CPPFLAGS): Check for libXi.

	* frontend/gtkglue.c (panel_destroy): Clear dialog elements
	after destroying the panel.

	Patches by Christian Bucher <cbucher@vernetzt.at>:

	* include/sane/sanei_pio.h: New file.
	* sanei/sanei_pio.c: Ditto.
	* backend/epson.c, backend/epson.h, backend/epson.conf: Updated
	with Christian's version adds support for parallel port interface.
	* sanei/sanei_scsi.c (sanei_scsi_req_wait): Patch by Matto to let
	sense-handler decide whether a non-zero sense_buffer[0] really
	should be considered an error (needed for Microtek backend).

	* doc/sane.tex (\subsubsection{Option Value Unit}): Document new

	Patches by Oliver Rauch:
	* frontend/gtkglue.c (unit_string): Handle SANE_UNIT_MICROSECOND.
	* frontend/scanimage.c (print_unit): Ditto.
	(parse_scalar): Ditto.

	* include/sane/sane.h: Add SANE_UNIT_MICROSECOND.

	* Upgrade to Kevin's latest SnapScan backend (0.4).

	* doc/sane-hp.man: Mention ScanJet IIp C1790A as working (reported
	by Ronald.Vogelaar@nl.origin-it.com).

	* frontend/xscanimage.c (init): Issue an error message when we see
	option -g as this is most likely due to someone invoking
	xscanimage through GIMP when GIMP support is missing.
	(scan_done): Add sanity check.
	(scan_start): Ditto.

	* Upgraded to Matto's latest Microtek backend (0.6).

	* Upgraded to Oliver's latest UMAX backend (0.71h).

	* frontend/preview.c (draw_selection): Fix so that selection is
	updated when sliders are moved.  Patch by Mikko Tyo"la"ja"rvi.

	* backend/snapscan.c (DL_INFO): Increase from 0 to 1.
	(DL_MAJOR_ERROR): Ditto.  This avoids printing error messages
	unless the user specifically requests them.
	* frontend/gtkglue.c: Include <sys/types.h>.

	* include/sane/config.h.in: Ignore HAVE_USLEEP under Apollo

	Patches by Paul Walker:

	* sanei/sanei_scsi.c: New Domain OS code.

	* tools/find-scanner.c: Include <sane/config.h>.

	* lib/usleep.c (usleep): Use time_$wait() to avoid broken usleep()
	implementation in Domain Sys5.3 environment.

	* config.sub: Translate sys5.3 into sysv3 for the benefit
	of Apollo Domain/OS.

	* sanei/sanei_init_debug.c (sanei_init_debug): Use DosScanEnv()
	instead of getenv() under OS/2.  (Patch by Yuri Dario

1998-03-02  David Mosberger-Tang  <David.Mosberger@acm.org>

	* frontend/xcam.c (main): Remove obsolete call to
	gdk_set_debug_level (0).

	* backend/mustek.c (attach): Print debug message when discovering
	unknown model.

	* doc/sane-scsi.man: Mention Adaptec 1505.

	* tools/find-scanner.c (main): List FreeBSD specific device names.

	* tools/Makefile.in (LIBS): Define.
	(find-scanner): Mention $(LIBS).

	* backend/epson.conf: New file.

	Patches by Yuri Dario <mc6530@mclink.it>:
	* backend/epson.c (sane_init): Support config file.

	* sanei/sanei_ab306.c (outb): Add missing parens.

	* backend/snapscan.c: Don't include <values.h>

	* backend/net.c: Include netdb.h after in.h to appease OS/2.
	Include <sys/types.h>.

	* sane-0.71.spec (%files): Mention sane-dmc.5.
	* doc/Makefile.in (SECT5): Ditto.

	* backend/dmc.c, backend/dmc.h: Update with Feb 26 patch from
	David Skoll.
	* doc/dmc.man: New file by David Skoll.

1998-02-25  David Mosberger-Tang  <David.Mosberger@acm.org>

	* backend/dmc.c (DMCSetMode): Add missing field name (patch by
	Martin Huber).

	* tools/find-scanner.c (main) [__sun]: Add missing command (patch
	by Martin Huber.

	* sanei/sanei_scsi.c (sanei_scsi_cmd): Fix typo: fd_Info->fd_info
	(patch by Jeff Freedman).

	* configure.os2: Update with patch by Jeff Freedman.

	* backend/snapscan.c (sane_snapscan_start): Replace non-standard
	MAXINT by INT_MAX from <limits.h>.
	(PATH_MAX): Define PATH_MAX as 1024 if not defined by headers.

1998-02-23  David Mosberger-Tang  <David.Mosberger@acm.org>

	* Version 0.71 released.

	* backend/dmc.c (DMCAttach): Close scsi fd before returning.

	* backend/microtek.c: Default to no_dump.
	(sane_init): Change "nodump" into "dump" option.
	* doc/sane-microtek.man: Document this change.

	* backend/snapscan.c: Include <sane/sanei_config.h>.
	(sane_snapscan_init): Use sanei_config_open() instead of fopen().

	* backend/snapscan.c: Upgrade to latest version (0.3 patch 7).
	* backend/snapscan.h: Ditto.
	* configure.in (V_MINOR): Up version to 0.71.

	* sanei/sanei_scsi.c (scsi_cmd) [USE == SOLARIS_INTERFACE]: "or"
	in lun instead of overwriting cdb[1] (patch by Martin Huber

	* backend/snapscan.c: Replace <posix1_lim.h> with <limits.h>.

	* backend/mustek.c (fix_line_distance_mfs): Add back missing
	multiplication by bpl (patch by Stefano Garavaglia

	* backend/coolscan.c: Updated with Didier's latest version.
	define as "coolscan.conf".  Include <sane/sanei_config.h>.
	(sanei_init): Use sanei_config_open() instead of fopen().

	* backend/coolscan-scsidef.h: Ditto.
	* backend/coolscan.h: Ditto.

	* backend/hp.c (sane_close): Change s to s->next (patch by David
	Skoll <dskoll@chipworks.com>).

1998-02-17  David Mosberger-Tang  <David.Mosberger@acm.org>

	* backend/Makefile.in (PRELOADABLE_BACKENDS): Mention apple &

	* backend/coolscan.c: New file (by Didier Carlier
	* backend/coolscan.h: Ditto.
	* backend/coolscan-scsidef.h: Ditto.

	* backend/apple.c: Include <sane/sanei_config.h>
	(sane_init): Use sanei_config_open().

	* backend/apple.conf: New file.

	* backend/dll.conf: Mention apple & coolscan backends.

	* backend/apple.c: New file (by Milon Firikis
	* backend/apple.h: Ditto.

	* sane-0.70.spec: Make symlink for libsane.so.0.

	* doc/sane-epson.man: Mention GT-5500 scanner as working (as
	reported by Umberto Zanatta <uzanatta@foscolo.org>).

1998-02-12  David Mosberger-Tang  <David.Mosberger@acm.org>

	* sanei/sanei_scsi.c (DOMAINOS_INTERFACE): Define.  Add
	Apollo Domain/OS support contributed by Paul Walker.

	* configure.in (AC_CHECK_HEADERS): Mention apollo/scsi.h.
	Add #undef of HAVE_APOLLO_SCSI_H.  Add type checks for u_char,
	u_int, u_long (DomainOS reportedly needs these).

	* sanei/sanei_scsi.c (sanei_scsi_req_wait) [USE ==
	LINUX_INTERFACE]: Always check for a non-zero error code in the
	sense-buffer.  The Linux sg driver guarantees that the sense
	buffer is clear to zero when no sense code has been requested, so
	this is safe.

1998-01-28  David Mosberger-Tang  <David.Mosberger@acm.org>

	* Version 0.7 released.

1998-01-27  David Mosberger-Tang  <David.Mosberger@acm.org>

	* frontend/xscanimage.c (quit_xscan): Exit with status 0, not 1.

	* tools/xerox (scale): Added improvements contributed by Joachim
	Woll <woll@physik.uni-kassel.de>.

	* Upgrade to Oliver's latest UMAX backend. 

	* include/Makefile.in (distclean): Add empty all rule.  Add
	distclean rule to delete Makefile.

	* Makefile.in (distclean): Delete japi/Makefile as well (this
	command should be removed once japi gets added to SUBDIRS).

	* backend/Makefile.in (EXTRA): Remove ../lib/usleep.lo and
	(libsane.la): Make dependent on $(LIBOBJS).

	* frontend/xscanimage.c (preview_window_destroyed): Declare second
	arg (added in some version of gtk?).

	* tools/find-scanner.c (main): Change __sgi__ to __sgi.

1998-01-26  David Mosberger-Tang  <David.Mosberger@acm.org>

	* backend/microtek.c: Don't declare strdup()---you're bound to get
	it wrong for some platforms!

	* doc/sane-scsi.man: Say explicity that generic SCSI support needs
	to be enabled.

	* doc/sane-hp.man (Problems): Document PhotoSmart problems
	as reported Peter Kirchgessner <Pkirchg@aol.com>.

	* backend/snapscan.c: Upgrade to v0.3 from
	* backend/snapscan.h: Ditto.

1998-01-22  David Mosberger-Tang  <David.Mosberger@acm.org>

	SnapScan backend by Franck Schnefra, Michel Roelofs and
	Kevin Charter:

	* backend/snapscan.c: New file.
	* backend/snapscan.h: Ditto.
	* backend/snapscan.conf: Ditto.

	* backend/umax-scanner.h (scanner_str): Add missing comma.

	* sanei/sanei_scsi.c (sanei_scsi_cmd): Pass sense_handler_arg to

	* include/sane/config.h.in: Add missing #undef of

1998-01-20  David Mosberger-Tang  <David.Mosberger@acm.org>

	* Version 0.69 released.

	* doc/sane-scsi.man: Limit ncr810 patch to kernel versions <

	* tools/xerox (HEIGHT): Add A4 paper size as comment.

1998-01-19  David Mosberger-Tang  <David.Mosberger@acm.org>

	* frontend/preview.c (make_preview_image_path): New function.
	(preview_destroy): Save scan surface parameters as a comment
	in the preview image.
	(restore_preview_image): Read scan surface parameters from
	preview image file and restore only if the parameters match
	the currently selected surface.
	(paint_image): Gracefully handle NULL image_data.
	(event_handler): Don't call restore_preview_image().
	(preview_update): Detect if the scan surface changed.  If so,
	establish a new preview widget size, preview area size, and
	restore a preview image, if available.

	* backend/mustek.c (sense_handler): Declare closure argument.

	* sanei/sanei_scsi.c (sanei_scsi_open): Fix typos.

	* backend/umax-scsi.c (umax_open_scanner): Pass us as sense_arg.
	(umax_open_scanner): Ditto.
	(umax_open_scanner): Ditto.
	* backend/umax.c (sane_start): Ditto.

	* backend/canon.c (attach): Pass 0 as sense_arg to sanei_scsi_open().
	(sane_start): Ditto.
	* backend/epson.c (attach): Ditto.
	(sane_start): Ditto.
	* backend/tamarack.c (sense_handler): Ditto.
	* backend/s9036.c (sane_start): Ditto.
	* backend/mustek.c (dev_open): Ditto.
	* backend/hp.c (attach): Ditto.
	(sane_start): Ditto.
	* backend/mustek.c (dev_open): Ditto.
	* tools/find-scanner.c (main): Ditto.

	* include/sane/sanei_scsi.h (SANEI_SCSI_Sense_Handler): Declare
	closure arg.
	(sanei_scsi_open): Ditto.

	* doc/sane-hp.man (Model): Remove obsolete comment regardign 5P.

1998-01-17  David Mosberger-Tang  <David.Mosberger@acm.org>

	* backend/mustek.c (dev_open): Fix debug message.

	* Solaris related patches by Martin Huber:
	* backend/umax-scsi.c (umax_wait_scanner): Sleep for 1 second
	instead of 100ms on Sun platforms---the SCHILYscg driver prints a
	warning message each time a device is busy.  Duh.
	(umax_get_data_buffer_status): Don't do
	umax_get_data_buffer_status() on Sun's.  This should be fixed...

	* sanei/sanei_scsi.c (sanei_scsi_open): Call unit_ready() towards
	the end of this function.
	(CCS_SENSE_LEN): Define as 18 if not defined
	by any header files.
	(sanei_scsi_cmd): Use sensebuffer to collect sense info.
	(scsi_cmd): Better error handling when using SCHILYscg driver.

1998-01-14  David Mosberger-Tang  <David.Mosberger@acm.org>

	* frontend/xscanimage.c (scan_start): Turn off dialog sensitivity.
	(scan_done): Restore dialog sensitivity.

	* backend/qcam.c (init_options): Turn on SANE_CAP_ALWAYS_SETTABLE.

	* frontend/preview.c (scan_done): Enable dialog sensitivity.
	(scan_start): Disable dialog sensitivity.

	* include/sane/sane.h (SANE_CAP_ACTIVE_WHILE_SCANNING): New
	manifest constant.

1998-01-12  David Mosberger-Tang  <David.Mosberger@acm.org>

	* frontend/gtkglue.c (panel_destroy): Call gtk_tooltips_unref()
	instead of gtk_tooltips_destroy() as suggested by Ben Gertzfield

1997-12-25  David Mosberger-Tang  <David.Mosberger@acm.org>

	* backend/canon.c: New file by Helmut Koeberle
	(sane_start): Print variables of type size_t as %lu and cast to
	(u_long), to make it compile without warning on all platforms.
	(attach): Remove extraneous semicolon.

	* backend/canon.h (canon_h): Ditto
	* backend/canon-scsi.c: Ditto.

1997-12-24  David Mosberger-Tang  <David.Mosberger@acm.org>

	* sanei/sanei_ab306.c (sanei_ab306_cmd): Write the first
	6 bytes of a SCSI command only (suggested by Andreas, but
	is this really correct??).

	* backend/mustek.c (gamma_correction): Add patch by Andreas
	Czechanowski <andreas@inspc44c.ins.uni-stuttgart.de> to
	fix lineart scanning for Paragon II 600 N scanner.

1997-12-23  David Mosberger-Tang  <David.Mosberger@acm.org>

	* tools/find-scanner.c (scanner_identify_scanner): Print info on
	all SCSI devices when --verbose is in effect.
	(main): Add Sun device names.

	* include/sane/config.h.in: Define _POSIX_SOURCE and
	__EXTENSIONS__ when compiling on a Sun with GCC.

	* configure.in (AC_CHECK_HEADERS): Mention sys/scsi/sgdefs.h and

1997-12-17  David Mosberger-Tang  <David.Mosberger@acm.org>

	* frontend/xscanimage.c (device_dialog): Suggestion by Matt: set
	window auto-shrink by calling gtk_window_set_policy().

	* japi/ImageCanvas.java: Updated with Jeff's latest patch.
	* japi/Jscanimage.java: Ditto.
	* japi/Makefile.in: Ditto.
	* japi/README.JAVA: Ditto.
	* japi/ScanIt.java: Ditto.
	* japi/ImageCanvasClient.java: New file.

1997-12-16  David Mosberger-Tang  <David.Mosberger@acm.org>

	* frontend/gtkglue.c (panel_build): Patch by Matt: a) For all
	individual options flagged as "advanced", panel_build will only
	display the option if the "Show advanced" button is toggled.
	Group identifiers flagged as "advanced" are handled the same as
	before.  b) panel_rebuild is called whenever the "Show advanced"
	button is toggled on or off.

	* doc/sane-scsi.man: Mention sane-epson(5) and sane-microtek(5).
	* doc/scanimage.man: Ditto.
	* doc/xscanimage.man: Ditto.

	* doc/sane-microtek.man: New file by Matt.

	* backend/microtek.c: Updated with Matt's version 0.4.
	* backend/microtek.h: Ditto.
	* backend/microtek.conf: Ditto.

	* doc/Makefile.in (SECT5): Mention sane-microtek.5.

1997-12-15  Fred Hucht & Michael Staats <{fred|michael}@thp.Uni-Duisburg.DE>

	* Added support for generic SCSI under AIX 4.1.x using the device
	driver gsc written by Matthew Jacob <mjacob@feral.com> (nice piece
	of work!).
	Find this driver under
	ftp://ftp.feral.com/pub/aix/gsc.tar.gz or
	Changed files: sanei/sanei_scsi.c, include/sane/config.h.in,

	* Moved '#include <lalloca.h>' to very beginning in all source
	files as AIX needs it there.

	* Added define OUTFILENAME to frontend/xscanimage.c.

	* Fixed wrong environment reference in /doc/sane-scsi.man.

	* Several changes in tools/find-scanner.c to run using
	above mentioned driver.
	Fixed wrong IN_periph_devtype_cpu (was 1, should be 3).	

1997-12-14  David Mosberger-Tang  <David.Mosberger@acm.org>

	* doc/sane-hp.man: Mention ScanJet 4P (reported to work by
	Adam Sjoegren <asjo@diku.dk>).

1997-12-09  David Mosberger-Tang  <David.Mosberger@acm.org>

	* frontend/saned.c (check_host): Change len from size_t to int to
	match getpeername() as per Single Unix Spec (as opposed to POSIX
	(start_scan): Ditto for getsockname().
	* backend/net.c (sane_start): Ditto.

	* backend/tamarack.c (TAMARACK_CONFIG_FILE): Delete.
	Include <sane/sanei_config.h>.
	(sane_init): Use sanei_config_open() instead of fopen().
	(read_data): Declare nbytes as size_t---makes a difference
	on 64-bit platforms.

1997-12-07  David Mosberger-Tang  <David.Mosberger@acm.org>

	* backend/s9036.c (sane_init): Run through "indent -gnu". Use
	sanei_config_open() instead of fopen().  Include
	(read_more_data): Print size_t variables by casting them to
	(u_long) and using %lu format (some platforms have size_t as
	u_long, others as u_int, which does make a difference if
	sizeof(long) > sizeof(int).
	(sane_start): Ditto.
	Add English translation for comments that were in German only.

	* backend/s9306.c: New file by Ingo Schneider.
	* backend/s9306.h: New file by Ingo Schneider.

1997-12-04  David Mosberger-Tang  <David.Mosberger@acm.org>

	* backend/mustek.c (sane_cancel): Collect child process status
	after killing it (avoids accumulating zombie processes).  Reported
	by Mike Sweet.
	* backend/umax.c (sane_cancel): Ditto.
	* backend/qcam.c (sane_close): Ditto.
	(sane_cancel): Ditto.

1997-12-03  David Mosberger-Tang  <David.Mosberger@acm.org>

	* Version 0.68 released.

1997-12-02  David Mosberger-Tang  <David.Mosberger@acm.org>

	* frontend/scanimage.c (window_val_user): New variable.
	(fetch_options): Don't overwrite window_val[i] if it's
	(main): Set window_val_user[i] as necessary.

	* backend/mustek.c (send_gamma_table): New function.
	(sane_start): Send gamma table both before and after start_scan().
	The MFS-06000CX is reported to need the gamma-table before
	start_scan() and the Mustek docs do indeed indicate downloading
	the gamma-table twice.
	(init_options): Make --custom-gamma option active by default (since
	gray-scale mode is the default mode).

1997-11-30  David Mosberger-Tang  <David.Mosberger@acm.org>

	* doc/sane-mustek.man: Mention MFC-08000CZ.

	* backend/mustek.c (attach): Reduce y_range.max for MFC-08000CZ
	from 300 to 292mm as reported by Jeroen Steenblik
	<jeroens@esrac.ele.tue.nl>.  Ditto for MFC-06000CZ.

1997-11-28  David Mosberger-Tang  <David.Mosberger@acm.org>

	* backend/umax-scanner.h (scanner_str): Add "Astra 610S".
	(known_scanners): Increment from 13 to 14.

	PP fixes by Andreas Czechanowski:
	* backend/mustek.c (EXTRA_SAVE_LINES): New macro.
	(fix_line_distance_pp): Use EXTRA_SAVE_LINES instead of hardcoded
	constant.  Various fixes to make it actually work.
	(reader_process): Initialize s->ld_ld_line to zero.

	* backend/mustek.h (struct Mustek_Scanner): Add member ld_line.

1997-11-26  David Mosberger-Tang  <David.Mosberger@acm.org>

	* tools/Makefile.in (.c.o): Add this rule.

	* tools/find-scanner.c: Include sanei_scsi.h and sanei_debug.h
	via <> quotes (note "").

1997-11-25  David Mosberger-Tang  <David.Mosberger@acm.org>

	* sanei/sanei_ab306.c (sanei_ab306_exit): Fix by Andreas
	Czechanowski: output 0x00 at port[i].base + 1 instead.

1997-11-22  David Mosberger-Tang  <David.Mosberger@acm.org>

	* doc/sane-mustek.man (Model): Clarify that paralell port != printer

	* backend/mustek.c (fix_line_distance_mfs): Add missing SANE_UNFIX()
	calls for x_range.max and dpi_range.max.
	(fix_line_distance_pp): Correct based on Andreas' feedback.

1997-11-18  David Mosberger-Tang  <David.Mosberger@acm.org>

	* configure.in (CFLAGS): Don't specify -ansi---with older libcs,
	it's causing more problems than it's worth.

	* Patch by Jeff Freedman:

	* japi/Sane.c: Limit string length to option size.

	* japi/SaneOption.java: Fix indentation.
	(unitString): New function.
	* japi/ImageCanvas.java: New file.
	* japi/Jscanimage.java: Ditto.
	* japi/ScanIt.java: Ditto.
	* japi/Makefile.in (CLASSES): Mention ScanIt.class and
	(all): Mention Jscanimage.class.
	* japi/Scan.c: Include <string.h>.
	(String_length): New function.

1997-11-16  David Mosberger-Tang  <David.Mosberger@acm.org>

	* frontend/gtkglue.c (scale_update): In recent versions of GTK,
	"value_changed" callbacks no longer return a value.  Change this
	function to type "void" accordingly.

	* sanei/sanei_scsi.c: Declare cam_fd only if USE ==

	* sanei/sanei_load_values.c (sanei_load_values): Detect errors
	while reading the option name (first call to sanei_w_string()).
	Reported by Geoffrey T. Dairiki.

	* sanei/sanei_ab306.c [HAVE_UNISTD_H]: Include <unistd.h>.  Fix by
	Geoffrey T. Dairiki.

	* lib/alloca.c: Enclose in #ifndef HAVE_ALLOCA bracket.  Fix by
	Geoffrey T. Dairiki.

	* include/lalloca.h: Declare alloca() as returning void* when
	__STDC__ is in effect so declaration matches definition in
	lib/alloca.c.  Reported by Geoffrey T. Dairiki.

	* frontend/preview.c (update_selection): Set coord[] values to
	rounded-to-nearest-int of float values.  This avoids the jumping
	selection box effect. Fix by Geoffrey T. Dairiki.

	* frontend/gtkglue.c (scale_update): Patch by Geoffrey T. Dairiki
	<dairiki@apl.washington.edu>: emit value_changed signal if the
	backend changed the value.

	* backend/umax.c: Upgraded to Oliver's latest UMAX version.

	* backend/mustek.c (sane_init): Ignore white space in front of an

1997-11-12  David Mosberger-Tang  <David.Mosberger@acm.org>

	* sanei/sanei_ab306.c (sanei_ab306_get_io_privilege):
	(struct port): Remove member HAVE_IO_PRIVS.
	(sanei_ab306_get_io_privilege): Get ioperm()issions independent of

	* backend/mustek.c (do_stop): Always send STOP command before
	closing the device.
	(dev_read_req_enter): For parallel-port scanner, set *idp to 0.

1997-11-10  David Mosberger-Tang  <David.Mosberger@acm.org>

	Bug reported by Matto Marjanovic <maddog@mir.com>:

	* frontend/gtkglue.c (panel_build): Create button only after we
	know the option's value.
	(button_new): Add VAL argument and initialize button state to

	correct value before connecting the toggled callback.

	Bugs reported by Petter Reinholdtsen <pere@link.no>:
	* sanei/sanei_config.c (sanei_config_open): Add missing cast to
	(char *).

	* sanei/sanei_scsi.c (sanei_scsi_cmd) [USE == IRIX_INTERFACE]: Fix
	(u_char) cast to (u_char *).

1997-11-06  David Mosberger-Tang  <David.Mosberger@acm.org>

	* backend/qcam.c (init_options): Set the type of OPT_NUM_OPTS to
	SANE_TYPE_INT (suggested by Guido Muesch
	* backend/mustek.c (init_options): Ditto.

1997-11-04  David Mosberger-Tang  <David.Mosberger@acm.org>

	* frontend/xcam.c (xcam_exit): Protect against recursive
	(main): Turn on preferences.advanced as no graphical geometry
	selection exists right now.
	Include <preferences.h>.
	preferences: New variable.
	(pref_toggle_advanced): New function.
	(pref_toggle_tooltips): Ditto.
	(build_preferences_menu): Add button to control advanced & tooltips

	* doc/sane.tex (subsection{sanecontrol_option}): Make it illegal
	for SANE_INFO_RELOAD_OPTIONS to be set needlessly.

	* backend/hp.c (sane_control_option): Only turn on RELOAD_PARAMS
	when value changed.
	* backend/qcam.c (sane_control_option): Only turn on
	RELOAD_PARAMS when value changed.

	* backend/mustek.c (sane_control_option): Only turn on
	RELOAD_OPTIONS and/or RELOAD_PARAMS when value changes.

	* Integrate b&w quickcam fixes by Guido Muesch

	* backend/qcam.c (bw_x_range, odd_bw_x_range, bw_y_range,
	odd_bw_y_range): New constants.
	(sane_open): Disable despeckle, black-level, hue, saturation,
	resolution & test options for b&w camera (either not useful or not
	supported at this point).
	(sane_start): Use QC_MONO_SET_CONTRAST instead of
	(sane_start): Call qc_reset() for b&w camera to avoid hangs (color
	camera doesn't need this and is faster that way).
	(sane_start): Multiply undecimated_width by s->val[OPT_DEPTH].w,
	not 4.

	* backend/qcam.h: Remove obsolete QC_BW_SET_CONTRAST,

1997-11-02  David Mosberger-Tang  <David.Mosberger@acm.org>

	* doc/sane-hp.man (Model): Mention ScanJet IIcx.  Johannes Geiger
	<J_Geiger@fleury.de> reported it to work fine under OS/2 with

	* backend/umax.c: Apply patch by Oliver Rauch that avoid
	umax hangs.

1997-11-01  David Mosberger-Tang  <David.Mosberger@acm.org>

	* Version 0.67 released.

	* sanei/sanei_ab306.c: New file.

	* backend/mustek.h (MUSTEK_FLAG_PP): New macro.
	(struct Mustek_Scanner): Add members ld.index and ld.lmod3
	for parallel-port scanner line-distance correction.

	* backend/mustek.c (color_seq): Move to global level from
	(fix_line_distance_pp): New function.
	(scsi_wait_ready): Renamed from wait_ready().
	(pp_wait_ready): New function.
	(dev_wait_ready): Ditto.
	(dev_open): Ditto.
	(dev_cmd): Ditto.
	(dev_req_wait): Ditto.
	(dev_read_start): Ditto.
	(dev_read_req_enter): Ditto.
	(dev_close): Ditto.
	(attach): Modify to use dev_open().  Set minimum scan resolution
	to 51 dpi for parallel-port scanners.
	(scan_area_and_windows): Call dev_cmd() instead of
	(mode_select): Ditto.
	(gamma_correction): Ditto.
	(start_scan): Ditto.
	(stop_scan): Ditto.
	(line_distance): Ditto.
	(get_image_status): Ditto.
	(backtrack_and_adf): Ditto.
	(gamma_correction): Return immediately if custom-gamma is turned
	off or if not doing a multibit scan.  Add support for sending all
	three gamma tables with a single command.
	(line_distance): Initialize additional line-distance correction
	state needed by parallel-port scanner.
	(read_req_enter): Remove.
	(send_data): Modify to support parallel-port scanner line-distance
	(reader_process): Require I/O-privilege if dealing with parallel
	port scanner and call dev_read_start().  Use dev_read_req_enter()
	instead of read_req_enter(), dev_req_wait() instead of
	(sane_start): For parallel-port scanner, send gamma table with
	a single gamma_correction() call.

	* doc/sane-mustek.man: Update with info regarding parallel port

	* backend/dll.c (add_backend): When a backend is present already,
	move it to the head of the backend list, so pre-loaded backends
	appear in the same order as if they had been loaded dynamically

	* backend/mustek.c (pp_mode_list): New constant.

	* backend/mustek.c (init_options): Use pp_mode_list for parallel
	port type scanners (no color lineart/halftone modes).

	* sanei/sanei_codec_ascii.c (ascii_w_string): free(*s) only if *s
	is non-NULL (reported by Geoffrey T. Dairiki

	* backend/mustek.c (attach): Turn on MUSTEK_FLAG_LD_NONE for
	MFS-12000SP with firmware 1.02 or newer. Reported by Henning
	Busacker <henning.busacker@Duesseldorf.netsurf.de>.

1997-10-25  David Mosberger-Tang  <David.Mosberger@acm.org>

	* doc/sane.tex (chapter{Contact Information}): Update mailing list
	and home page address.

	* backend/dll.c: Include <sane/sanei_config.h>.  Call
	sanei_config_open() instead of fopen().
	* backend/hp.c: Ditto.
	* backend/mustek.c: Ditto.
	* backend/net.c: Ditto.
	* backend/pint.c: Ditto.
	* backend/qcam.c: Ditto.
	* backend/umax.c: Ditto.

	* backend/Makefile.in (EXTRA): Mention ../sanei/sanei_config.lo.

	* doc/sane-dll.man: Document SANE_CONFIG_DIR.
	* doc/sane-hp.man: Ditto.
	* doc/sane-mustek.man: Ditto.
	* doc/sane-net.man: Ditto.
	* doc/sane-pint.man: Ditto.
	* doc/sane-qcam.man: Ditto.
	* doc/sane-scsi.man: Ditto.
	* doc/sane-umax.man: Ditto.
	* doc/saned.man: Ditto.

	* backend/microtek.c: Updated with v0.3 from Matt.
	Include <sane/sanei_config.h>
	(MICROTEK_CONFIG_FILE): Define as "microtek.conf".
	(sane_init): Replace fopen() with sanei_config_open().

	* backend/microtek.h: Ditto.

1997-10-24  David Mosberger-Tang  <David.Mosberger@acm.org>

	* sanei/sanei_config.c (sanei_config_open): Add multiple-directory
	support for SANE_CONFIG_DIR.

	* sanei/sanei_config.c: New file by Jeff Freedman.
	* include/sane/sanei_config.h: Ditto.

1997-10-23  David Mosberger-Tang  <David.Mosberger@acm.org>

	* Fixes for OS/2 by Jeff Freedman:
	* frontend/Makefile.in (SBINPROGS): Set to @SANED@.
	* configure.os2 (LN_S): Add --sysconfdir=.
	* configure.in: Set up SANED depending on <sys/socket.h>.
	* backend/Makefile.in (EXTRA): Mention usleep.lo and strndup.lo.
	* backend/pnm.c (rgblength, rgbbuf, rgbleftover): Declare as
	* ltconfig: Upgrade to 1.0d.
	* ltmain.sh: Ditto.
	* sanei/sanei_constrain_value.c: Include <sane/config.h>.

1997-10-22  David Mosberger-Tang  <David.Mosberger@acm.org>

	* frontend/gtkglue.h (struct GSGDialog): Remove idle_id member.

	* frontend/gtkglue.c (idle_handler): Remove.  GTK's reference
	counting appears to have been fixed (?).

	* backend/umax_scanner.h: Update with Oliver's latest version.
	* backend/umax-scsi.c: Ditto.
	* backend/umax-scsidef.h: Ditto.
	* backend/umax-struct.h: Ditto.
	* backend/umax.c: Ditto.
	* backend/umax.h: Ditto.

1997-10-18  David Mosberger-Tang  <David.Mosberger@acm.org>

	* sanei/sanei_scsi.c (sanei_scsi_req_enter): Set cdb.hdr.pack_id
	to unique id number.

1997-10-17  David Mosberger-Tang  <David.Mosberger@acm.org>

	* japi/Makefile.in: New file (by Jeff Freedman <jsf@hevanet.com>).
	* japi/README.JAVA: Ditto.
	* japi/Sane.c: Ditto.
	* japi/Sane.java: Ditto.
	* japi/SaneDevice.java: Ditto.
	* japi/SaneOption.java: Ditto.
	* japi/SaneParameters.java: Ditto.
	* japi/SaneRange.java: Ditto.
	* japi/Test.java: Ditto.

	* configure.in (AC_OUTPUT): Mention japi/Makefile.

	* sanei/sanei_scsi.c (sanei_scsi_cmd) [USE == IRIX_INTERFACE]:
	Add data buffer alignment fix by Michael Sweet.

1997-10-24  Jeff Freedman <jsf@hevanet.com>

	* sanei_open_config() added.  Backends call it to open .conf files.

1997-10-14  David Mosberger-Tang  <David.Mosberger@acm.org>

	* Version 0.66 released.

	* README: Update with new URLs and latest GIMP/GTK info.

1997-10-11  David Mosberger-Tang  <David.Mosberger@acm.org>

	* include/sane/saneopts.h: Add #defines for TEN_BIT_MODE, WARMUP,

	* README: Remove umax-specific configure options (they're now
	runtime options).
	* configure.in (CPPFLAGS): Ditto.
	* include/sane/config.h.in: Ditto.

	* backend/epson.c: Updated 

1997-10-09  David Mosberger-Tang  <David.Mosberger@acm.org>

	* backend/umax.c (sane_exit): Remove bogus call to free()
	(reported by Peter).

Thu Oct  9 20:20:32 1997  Kazuhiro Sasayama  <kaz@hypercore.co.jp>

	* epson.c (sane_start): Fix lcount computation.

Thu Oct  9 11:44:03 1997  Kazuhiro Sasayama  <kaz@hypercore.co.jp>
	* epson.c (sane_start): Use byte-interleaved mode if available.
	(sane_start): Set line counter for byte-interleaved mode.
	(sane_read): Handle byte-interleaved mode.
	(sane_init) [PACKAGE && VERSION]: Debug out PACKAGE and VERSION.

Tue Oct  7 18:44:36 1997  Kazuhiro Sasayama  <kaz@hypercore.co.jp>

	* epson.c (set_lcount): New function.
	(sane_start): Use block mode for monochrome if available.
	(sane_read): Handle block mode.

	* epson.h (struct Epson_Scanner): Add block.

Tue Oct  7 15:48:11 1997  Kazuhiro Sasayama  <kaz@hypercore.co.jp>

	* epson.c (set_speed): New function.
	(sane_start): Use set_speed.

Tue Oct  7 15:44:33 1997  Kazuhiro Sasayama  <kaz@hypercore.co.jp>

	* README: Add info about a mailing list.

	* Makefile.am (libsane_epsonx_la_LDFLAGS): Increment the revision.

	* epson.c (identify): Debug output the command level.

1997-10-08  David Mosberger-Tang  <David.Mosberger@acm.org>

	* backend/mustek.conf: Turn on linedistance-fix and lineart-fix by

	* include/sane/config.h.in: Remove

	* doc/sane-mustek.man (CONFIGURATION): Document option
	linedistance-fix and lineart-fix.

	* configure.in: Remove test for --enable-ld-fix.

	* backend/mustek.h (MUSTEK_FLAG_LD_FIX): New flag.

	* backend/mustek.c (line_distance): Replace
	NEED_MUSTEK_LINE_DISTANCE_WORKAROUND with runtime test for same.
	(reader_process): If MUSTEK_FLAG_LINEART_FIX is on, delay 200ms
	when scanning in lineart mode.
	(sane_init): New variable.  Add linedistance-fix and lineart-fix

	* backend/Makefile.in (install): Fix install rule so all symlinks
	necessary for libsane.so are installed.

	* backend/dll.c (load): Change from LIBNAME to LIBPATH (as per
	libtool-1.0c documention).

	* sanei/sanei_scsi.c (issue): Declare `static'.

	* aclocal.m4: Update with contents of libtool.m4.

	* configure.in (AC_PROG_RANLIB): Remove (once again!).

	* config.guess: Update from libtool-1.0c.
	* config.sub: Ditto.
	* ltconfig: Ditto.
	* ltmain.sh: Ditto.

	* backend/epson.c: Update with Kazuhiro's latest epson version

1997-10-07  David Mosberger-Tang  <David.Mosberger@acm.org>

	* frontend/gtkglue.c (panel_destroy): Clear elem->menu after
	freeing it (reported by Kazuhiro Sasayama <kaz@hypercore.co.jp>).

1997-10-06  David Mosberger-Tang  <David.Mosberger@acm.org>

	* backend/epson.c: Updated with Kazuhiro Sasayama
	<kaz@hypercore.co.jp> latest version (1.1.5).

1997-10-04  David Mosberger-Tang  <David.Mosberger@acm.org>

	* Version 0.65 released.

	* sanei/sanei_scsi.c (close_aspi): Rename from sanei_close_aspi (static
	functions don't need ugly sanei_ prefix...).
	(open_aspi): Ditto.

	* configure.os2: New file (from Jeff's config.os2).

	* backend/umax-scsi.c: Mmove include of <scsi/scsi.h> and
	<scsi/sg.h> into !def UMAX_TO_SANE bracket.

	* backend/pnm.c (getparmfromfile): Open with mode "rb" to get
	binary file on platforms where this is meaningful.

1997-10-02  David Mosberger-Tang  <David.Mosberger@acm.org>

	* doc/sane-epson.man: Mention that backend is known to work with

1997-10-01  David Mosberger-Tang  <David.Mosberger@acm.org>

	* doc/sane-epson.man: New file (based on Kzuhiro's README file).

	* backend/Makefile.in (PRELOADABLE_BACKENDS): Mention epson.
	(libsane-epson.la): Add dependencies for Epson backend.

	* backend/epson.c: New file by Kazuhiro Sasayama
	* backend/epson.h: Ditto.

	* backend/microtek.c: Updated with latest version from
	http://www.mir.com/mtek/ by Matt Marjanovic <maddog@mir.com>.
	* backend/microtek.h: Ditto.
1997-10-3   Jeff Freedman <jsf@hevanet.com>

	* sanei/sanei_scsi.c:  Minor fixes for OS/2 support.

	* configure.in: Check for presence of sys/socket.h to set @NET@.

	* backend/Makefile.in: net -> @NET@

1997-09-30  David Mosberger-Tang  <David.Mosberger@acm.org>

	* sanei/sanei_scsi.c: Integrate OS/2 support by Jeff Freedman:
	(OS2_INTERFACE) Define.
	(open_aspi,close_aspi): New OS/2-specific functions.
	(sanei_scsi_open): Add OS/2 support.
	[USE = OS2_INTERFACE]: OS/2 version of sanei_scsi_cmd().
	(sanei_scsi_cmd, sanei_scsi_req_wait) [STUBBED_INTERFACE]:
	Return proper value.
	* include/sane/config.h.in (HAVE_STRNCASECMP, HAVE_OS2_H): Add
	#undef.  If !HAVE_STRNCASECMP, define strncasecmp macro as
	alias for strnicmp.

	* configure.in (AC_CHECK_FUNCS): Check for strncasecmp().
	(AC_CHECK_HEADERS): Check for os2.h.

1997-09-30  David Mosberger-Tang  <David.Mosberger@acm.org>

	* sanei/sanei_scsi.c: Integrate OS/2 support by Jeff Freedman:
	(OS2_INTERFACE) Define.
	(open_aspi,close_aspi): New OS/2-specific functions.
	(sanei_scsi_open): Add OS/2 support.
	[USE = OS2_INTERFACE]: OS/2 version of sanei_scsi_cmd().
	(sanei_scsi_cmd, sanei_scsi_req_wait) [STUBBED_INTERFACE]:
	Return proper value.
	* include/sane/config.h.in (HAVE_STRNCASECMP, HAVE_OS2_H): Add
	#undef.  If !HAVE_STRNCASECMP, define strncasecmp macro as
	alias for strnicmp.

	* configure.in (AC_CHECK_FUNCS): Check for strncasecmp().
	(AC_CHECK_HEADERS): Check for os2.h.

1997-09-24  David Mosberger-Tang  <davidm@azstarnet.com>

	* Version 0.64 released.

	* PROJECTS (Backend): Update microtek entry.
	Add entry for sgivl.

	* backend/microtek.conf: New file.

	* backend/dll.conf: Mention microtek.

	* backend/Makefile.in (PRELOADABLE_BACKENDS): Mention microtek.
	(libsane-microtek.la): Mention microtek dependencies.

	* backend/microtek.c: New file by Matthew Marjanovic.
	* backend/microtek.h: Ditto.

1997-09-23  David Mosberger-Tang  <davidm@azstarnet.com>

	* sanei/sanei_scsi.c (sanei_scsi_cmd): Integrate Michael Sweet's
	latest Irix implementation of sanei_scsi_cmd().

Sat Sep  6 08:59:24 1997  David Mosberger-Tang  <David.Mosberger@acm.org>

	* Version 0.63 released.

	* configure.in (V_MINOR): Bump up to 63.

	* configure.in (AM_PROG_RANLIB): Go back to AC_PROG_RANLIB.  The
 	former causes a bad configure script.

Fri Aug 29 16:08:05 1997  David Mosberger-Tang  <David.Mosberger@acm.org>

	* doc/sane-umax.man: Change status of "Astra 1200S" to "all modes ok"
	as Oliver tells me that this has been tested and is working now.

Wed Aug 20 17:23:04 1997  David Mosberger-Tang  <David.Mosberger@acm.org>

	* sane-0.63.lsm: Update email addresses etc.

	Integrate Oliver Rauch's UMAX improvements:

	* README: Document --enable-umax-preview-fix,

	* configure.in (UMAX_RGB_PREVIEW, UMAX_START_SCAN_PATCH): Define if

	* include/sane/config.h.in (UMAX_RGB_PREVIEW, UMAX_START_SCAN_PATCH):
	Add #undef.

	* include/sane/saneopts.h: Add manifest constants for options
	resolution-bind, negative, quality-cal, threshold, analog-gamma,
	analog-gamma-r, analog-gamma-g, analog-gamma-b, analog-gamma-bind,
	smear, white-bind, black-bind.

	* AUTHORS (Frontends): Update email addresses of Oliver Rauch and

1997-08-07  David Mosberger-Tang  <davidm@azstarnet.com>

	* backend/mustek.c (attach): Print Mustek scanner info at
	debug level 2, not 3.

1997-08-06  David Mosberger-Tang  <davidm@azstarnet.com>

	* frontend/preview.c (XSERVER_WITH_BUGGY_VISUALS): Make conditional
	on #ifdef __alpha__ (Michael Sweet reports that the old code broke
	SGI IRIX 6.3).

1998-08-01  David Mosberger-Tang  <davidm@azstarnet.com>

	* include/sane/config.h.in (HAVE_SYS_SCSICMD_H, HAVE_SYS_DSREQ_H):

	* configure.in (AC_CHECK_HEADERS): Mention sys/scsicmd.h and

	* sanei/sanei_scsi.c (SCO_OS55_INTERFACE, IRIX_INTERFACE,

1997-07-27  David Mosberger-Tang  <davidm@azstarnet.com>

	* frontend/xscanimage.c (quit_xscan) [HAVE_LIBGIMP_GIMP_H]: When
	running as a GIMP extension, call gimp_quit().
	(init) [HAVE_LIBGIMP_GIMP_H]: Set GDK's xshm flag based on GIMP's

	* doc/sane-mustek.man (SCSI ADAPTER TIPS): Try to make complete

1997-07-25  David Mosberger-Tang  <davidm@azstarnet.com>

	* Version 0.62 released.

	* configure.in (CPPFLAGS): Test for gtk_gamma_curve_new() to
	see whether appropriate version of gtk is installed.

	* backend/mustek.c (sane_init): Add parsing support for option
	(strip_height): New variable to limit scan strip height.
	(reader_process): If strip_height is greater than 0.0, limit
	lines_per_buffer so that no more than strip_height inches are
	scanned with a single SCSI read command.

	* doc/sane-mustek.man (CONFIGURATION): Describe strip-height

1997-07-23  David Mosberger-Tang  <davidm@azstarnet.com>

	* doc/sane-hp.man (Model): Added ScanJet 3c info.

1997-07-22  David Mosberger-Tang  <davidm@azstarnet.com>

	* frontend/scanimage.README: Remove file.

	* doc/sane-scsi.man: Add info on generic AM53C974 driver.

1997-07-19  David Mosberger-Tang  <davidm@azstarnet.com>

	* sanei/sanei_scsi.c [USE == LINUX_INTERFACE]: Include

1997-07-18  David Mosberger-Tang  <davidm@azstarnet.com>

	* sanei/sanei_scsi.c (sanei_scsi_req_flush_all)
	[WE_HAVE_ASYNC_SCSI]: Implement stub.

	* scripts/xerox: New file (simple xeroxing script).

	* frontend/scanimage.c (main): When opening a device fails, also
	print reason for failure.

	* frontend/preview.c (preview_new): Register expose_event handler.
	(preview_destroy): Call scan_done() if called when preview
	scanning in progress.

	* backend/mustek.c (attach): Add argument MAY_WAIT.  If it's TRUE,
	wait for scanner to become ready before sending inquiry command.
	(do_cancel): Rename to do_stop.  Ignore child's exist status
	when we're really cancelling a scan.  Issue stop_scan() command
	only if the scan got cancelled and do a wait_ready() before
	issueing the stop_scan().
	(read_data): Delete.
	(sane_init): Call attach() with MAY_WAIT set to SANE_FALSE.
	(sane_open): Call attach() with MAY_WAIT set to SANE_TRUE.

	* frontend/preview.c (display_partial_image): Use gtk_preview_put()
	to update the preview window.  Much faster than hiding/showing the
	(expose_handler): New function.

	* frontend/progress.c (progress_new): Make "Cancel" button a
	toggle-button so user can see when it was pressed down while
	the backend cancels its operation.

	* backend/mustek.c (do_cancel): Call wait_ready() before
	attempting to stop scanner.
	(read_req_enter): New function.
	(send_data): Ditto.
	(sigterm_handler): New function.
	(reader_process): Reimplement using asynchronous SCSI command
	(wait_ready): Use gettimeofday() to implement timeout.  The
	scsi command itself may take a considerable amount of time
	(1 second or more) so we can't just loop for a fixed number
	of times.

	* include/sane/sanei_scsi.h: Declre sanei_scsi_req_enter,
	sanei_scsi_req_wait, and sanei_scsi_req_flush_all.

	* sanei/sanei_scsi.c [WE_HAVE_ASYNC_SCSI]: Define.
	(issue): New function.
	(sanei_scsi_req_flush_all): New function.
	(sanei_scsi_req_enter): Ditto.
	(sanei_scsi_req_wait): Ditto.
	(sanei_scsi_cmd): Reimplement in terms of enter/wait.
	(sanei_scsi_req_enter) [!WE_HAVE_ASYNC_SCSI]: Stub that
	simply calls sanei_scsi_cmd().
	(sanei_scsi_req_wait): Empty stub.

1997-07-16  David Mosberger-Tang  <davidm@azstarnet.com>

	* doc/sane-scsi.man: Add Tekram DC390 info (contributed by
	kawk@Home.Yo.COM (Kolja Waschk))

1997-07-15  David Mosberger-Tang  <davidm@azstarnet.com>

	* sanei/sanei_scsi.c (sanei_scsi_cmd) [USE==LINUX_INTERFACE]:
	Return SANE_STATUS_NO_MEM if write() of SCSI command fails.

	* backend/mustek.c (do_cancel): If reader_process exited, use
	exit status as return value.
	(reader_process): Return SANE_STATUS_IO_ERROR instead of 1.
	Return SANE_STATUS_NO_MEM instead of 2.  Return STATUS instead
	of 3.  Return SANE_STATUS_GOOD instead of 0.
	(sane_read): If do_cancel() returns anything but
	happened and the return status should be returned.

	* doc/sane-scsi.man: Fix typo: sg.h is in /usr/include/scsi, not

	* PROBLEMS: Add warning about updating Linux kernel after increasing

1997-07-14  David Mosberger-Tang  <davidm@azstarnet.com>

	* frontend/xscanimage.c (quit_xscan): Destroy preview window before
	quitting, so preview image gets saved if necessary.

	* frontend/Makefile.in (LIBX11): New macro.
	(LIBGTK): Ditto.
	(xscanimage): Use $(LIBGTK) instead of $(LIBS).
	(xcam): Use $(LIBGTK) instead of $(LIBS).

	* configure.in (LIBX11): Define as all libraries necessary when
	using X11.
	(LIBGTK): Define as all libraries necessary when using GTK+.

	* backend/mustek.c (sane_start): Don't send gamma in lineart and
	halftone mode!

	* doc/sane-scsi.man: Add info on how to setup BT958 card (contributed
	by Jeremy <jeremy@xxedgexx.com>).

1997-07-13  David Mosberger-Tang  <davidm@azstarnet.com>

	* doc/sane-scsi.man: Add info on FreeBSD.

1997-07-12  David Mosberger-Tang  <davidm@azstarnet.com>

	* ltmain.sh: Installed libtool-1.0-nomode patch.

	* configure.in (AC_PROG_RANLIB): Change to AM_PROG_RANLIB.

1997-07-11  David Mosberger-Tang  <davidm@azstarnet.com>

	* ltmain.sh: Upgrade to libtool-1.0.
	* ltconfig: Ditto.
	* config.guess: Ditto.
	* config.sub: Ditto.
	* aclocal.m4: Ditto.

1997-07-08  David Mosberger-Tang  <davidm@azstarnet.com>

	* Version 0.61 released.

	* backend/Makefile.in (LIBLIB_FUNCS): Mention snprintf.

	* backend/umax-struct.h (LINEART, HALFTONE, GREYSCALE, RGB): Move
	the pound sign to the beginning of the line.
	* backend/umax-scsidef.h: Ditto for all indendent #defines in this
	* backend/umax-scsi.c: Ditto for all # directives in here.

	* frontend/saned.c [HAVE_LIBC_H]: Include <libc.h>.

1997-07-07  David Mosberger-Tang  <davidm@azstarnet.com>

	* backend/net.c [HAVE_LIBC_H]: Include <libc.h>.

	* lib/usleep.c: New file (adapted from glibc).

	* lib/strndup.c: Move #ifndef HAVE_STRNDUP up so nothing
	except <config.h> gets included unless really needed.
	Include <sys/types.h> to get size_t defined.

	* lib/snprintf.c (vsnprintf): Rename from vplp_snprintf.
	(snprintf): Rename from plp_snprintf.

	* include/sane/config.h.in: Add #undef HAVE_USLEEP.  Add #undef

	* configure.in: Test ${ac_cv_prog_gcc} instead of $CC to find out
	whether we're dealing with gcc.  Test for io/cam/cam.h header.
	(AC_C_INLINE): Add.
	(AC_CHECK_FUNCS): Mention usleep.
	Check for Xext after checking for X11 since on some platforms,
	linking against Xext requires functions from X11.

	* backend/umax.c (PATH_MAX): Define as 1024 if undefined.

	* backend/Makefile.in (CONFIGS): Don't add $(srcdir) prefix.
	(LIBLIB_FUNCS): Mention usleep.
	(install): Invoke $(LIBTOOL) $(MINST) --finish $(libdir) in
	a final step.  Correct installation rule for config files.

1997-07-06  David Mosberger-Tang  <davidm@azstarnet.com>

	* sanei/sanei_scsi.c (sanei_scsi_cmd): New variable RESULT.

1997-07-05  David Mosberger-Tang  <davidm@azstarnet.com>

	* sanei/sanei_scsi.c (sanei_scsi_cmd): Improve BSD version based
	on patch by Amancio Hasty <hasty@rah.star-gate.com>.
	(BSD_INTERFACE): Rename from NETBSD_INTERFACE (FreeBSD uses the
	same interface).

	* configure.in (CPPFLAGS): Check for scsireq_enter in libscsi.a.

	* doc/Makefile.in (SECT5): Mention sane-scsi.5.
	* doc/sane-scsi.man: New file.

	* doc/sane-umax.man: Add SEE ALSO section mentioning sane-scsi(5).
	* doc/sane-mustek.man: Ditto.

	* doc/scanimage.man: Mention sane-umax(5).
	* doc/xscanimage.man: Ditto.
	* doc/saned.man: Ditto.

	* configure.in (AC_TYPE_PID_T): Add.
	* include/sane/config.h.in: Add undef of pid_t.

1997-07-04  David Mosberger-Tang  <davidm@azstarnet.com>

	* lib/sigprocmask.c (sigprocmask): Use hardcoded values instead

1997-07-03  David Mosberger-Tang  <davidm@azstarnet.com>

	* configure.in (CPPFLAGS): Remove -D_POSIX_SOURCE.  We can't define
	it safely since it causes select() related typedefs and defines
	to go away under FreeBSD, for example.

1997-07-02  David Mosberger-Tang  <davidm@azstarnet.com>

	* configure.in (CPPFLAGS): Put -D_GNU_SOURCE and -D_POSIX_SOURCE

	* doc/sane-umax.man: Change SG_BIG_BUFF example from 128KB to
	* doc/sane-mustek.man: Ditto.  Mention DTC3181E together with

	* frontend/gtkglue.c (gsg_create_dialog): Initialize dialog->advanced
	to TRUE so "dumb" frontends will show all options.

	* frontend/xscanimage.c (device_dialog): Turn off advanced options
	by default.

	* configure.in (AC_CHECK_TYPE): Check for u_long and u_int.
	Check for scsireq_t.
	* sanei/sanei_scsi.c: Don't define scsireq_t here.

	* include/sane/config.h.in: Add undef of u_long, u_int, and

1997-07-01  David Mosberger-Tang  <davidm@azstarnet.com>

	* frontend/xscanimage.c (quit_xscan): No longer call
	preview_destroy() since that now gets called as part of
	the "destroy" callback.

	* backend/hp.c (attach) [PREFER_DEVICEPIXEL]: Use device-pixel
	unit commands instead of decipoint commands so things work on a 5p
	as well (contributed by NOGAYA Shigeki
	(sane_start) [PREFER_DEVICEPIXEL]: Convert from mm to pixels.

	* frontend/preview.c (input_available): Break out of per-bit loop
	when done with one line (fix contributed by NOGAYA Shigeki
	* frontend/xscanimage.c (input_available): Ditto.

	* doc/sane-umax.man: Rename SCSI id to Product id to reduce
	* doc/sane-hp.man: Ditto.
	* doc/sane-mustek.man: Ditto.

	* backend/mustek.c (wait_ready): Ignore errors during wait_ready().
	With 3-pass scanners, ncr810 driver returns EIO while the scanner
	is getting ready for pass 2 or 3.

1997-06-30  David Mosberger-Tang  <davidm@azstarnet.com>

	* backend/mustek.c (sense_handler): Print debug info if we
	find unknown sense result.

	* sanei/sanei_scsi.c (sanei_scsi_cmd): Consider sense_buffer[]
	only when result != 0.

	* frontend/scanimage.c (sighandler): Change return value type
	from void to RETSIGTYPE (from <sane/config.h>).

	* doc/sane-mustek.man: Mention problems with MSFS-12000SP.

	* backend/umax.c (sane_start): Don't use C++ style line comments.

	* backend/umax-scsi.c (umax_do_scsi_cmd): Use sigemptyset() to clear
	out signal set.  Include <sane/config.h>.

	* frontend/saned.c [HAVE_SYS_SELECT_H]: Include <sys/select.h>.
	* include/sane/config.h.in: Mention HAVE_SYS_SELECT_H.

Thu Jun 26 10:19:50 1997  David Mosberger-Tang  <davidm@azstarnet.com>

	* README: Mention permissions on generic SCSI device.

Tue Jun 24 17:35:52 1997  David Mosberger-Tang  <davidm@azstarnet.com>

	* doc/xscanimage.man: Fix spacing.

	* doc/sane-dll.man: Mention how list of pre-loaded backends
	can be changed.

Sun Jun 22 08:29:47 1997  David Mosberger-Tang  <davidm@azstarnet.com>

	* PROBLEMS: Add note on SCSI device names under OpenStep.

	* sanei/sanei_scsi.c (sanei_scsi_cmd): Fix various minor bugs.
	(sanei_scsi_open): Add support for OpenStep.

	* backend/Makefile.in (install): Replace 'ln -f -s' with `rm -f',
 	`ln -s' sequence.  OpenStep doesn't support the -f option at all.

Fri Jun 20 07:30:18 1997  David Mosberger-Tang  <davidm@azstarnet.com>

	* doc/sane-qcam.man: Updated B&W status.

	* sanei/sanei_save_values.c [HAVE_LIBC_H]: Include <libc.h>.
	* sanei/sanei_load_values.c: Ditto.

	* lib/sigprocmask.c: New file.
	* lib/strdup.c: Ditto.

	* lib/Makefile.in (LIBLIB_OBJS): Mention strdup.o and sigprocmask.o.
	(LIBLIB_LTOBJS):  Mention strdup.lo and sigprocmask.lo.
	(liblib.a): Use $(RANLIB) instead of -ranlib.

	* include/sane/sanei_backend.h [!HAVE_SIGPROCMASK]: Define
 	compatibility macros sigset_t, sigemptyset(), sigfillset(),
	sigaddset(), sigdelset(), and sigaction().
	Define macro SIGACTION.

	* frontend/saned.c (HAVE_VARARG_MACROS): Don't define unless we
	have at least gcc 2.6.
	* include/sane/sanei_debug.h Ditto.  Use HAVE_VARARG_MACROS
	instead of __GNUC__.
	* sanei/sanei_init_debug.c: Ditto.

	* configure.in (AC_PROG_RANLIB): Mention.
	(CFLAGS): Move up near the beginning and add -D_POSIX_SOURCE.
	(AC_CHECK_HEADERS): Test for libc.h.
	(AC_TYPE_SIGNAL): Mention.
	(AC_CHECK_FUNCS): Check for sigprocmask.

	* backend/net.c (sane_init): Honor SANE_NET_HOSTS even if
	net.conf does not exist.

	* backend/mustek.c (sane_start): Use "struct SIGACTION" so it's
	easier to make code work on platforms that don't support
	* backend/umax.c (sane_start): Ditto.

	* ltmain.sh: Upgrade to libtool-0.9h.
	* ltconfig: Ditto.
	* config.guess: Ditto.
	* config.sub: Ditto.
	* aclocal.m4: Ditto.

Thu Jun 19 08:26:33 1997  David Mosberger-Tang  <davidm@azstarnet.com>

	* configure.in (V_MINOR): Update forgotten version number...

	* backend/qcam.c (reader_process): Scale 4 and 6 bpp to 8 bpp.

	* backend/mustek.h (MUSTEK_FLAG_LD_NONE): New flag.
	* backend/mustek.c (attach): Turn on MUSTEK_FLAG_LD_NONE for
	MSF-06000SP (this fixes the problems for Andreas Gaumann
	(attach): Print debug message when MUSTEK_FLAG_LD_NONE is on.
	(line_distance): Fix up ld correction only if MUSTEK_FLAG_LD_NONE
	is not on.

Wed Jun 18 15:42:25 1997  David Mosberger-Tang  <davidm@azstarnet.com>

	* doc/sane.tex (section{Image Data Format}}): Clarify
	what valid bit-depths are.
Tue Jun 17 07:47:51 1997  David Mosberger-Tang  <davidm@azstarnet.com>

	* backend/qcam.c (sane_get_parameters): Test for != QC_COLOR
	instead of == QC_MONO.  Apparently, there are several versions
	of the monochrome camera.
	(qc_setscanmode): Ditto.

	* lib/snprintf.c: Update with latest version (also includes
	license information now).

	* sane-0.6.lsm (Author): Update Tristan Tarrant's email address.
	* AUTHORS: Ditto.
	* frontend/xscanimage.c: Ditto.

Sun Jun 15 10:08:44 1997  David Mosberger-Tang  <davidm@azstarnet.com>

	* doc/xscanimage.man: Add section on how to run xscanimage under
 	the GIMP.

	* frontend/xscanimage.c (init) [HAVE_LIBGIMP_GIMP_H]: Call
 	gtk_rc_parse() with gimp_gtk_rc() to get space-saving layout of
 	The GIMP. (Suggested by Sven Neumann.)

	* sanei/sanei_scsi.c (sanei_scsi_cmd): Add NeXTStep/OpenStep
	(sanei_scsi_cmd): Adjust NetBSD version to make it more like
	NeXTStep/OpenStep version.

	* configure.in (AC_CHECK_HEADERS): Mention bsd/dev/scsireg.h.

Thu Jun 19 15:19:38 1997  Gordon Matzigkeit  <gord@gnu.ai.mit.edu>

	* backend/umax-scsi.c: Parameterize slightly more so that the
 	build succeeds on non-Linux platforms.

	* Makefile.in, backend/Makefile.in, doc/Makefile.in,
 	frontend/Makefile.in (install): Fail immediately if any
 	installation fails.  Use mkinstalldirs to create all installation

Sat Jun 14 11:07:13 1997  David Mosberger-Tang  <davidm@azstarnet.com>

	* Version 0.6 released.

	* frontend/preview.c (preview_new): Connect "destroy" signal
	so we notice if window manager closes our window.
	(top_destroyed): New function.

	* frontend/xscanimage.c (scan_preview): Make it robust against
 	preview_new() returning NULL and connect "destroy" signal so we
 	notice when the window manager closes the preview window.
	(preview_window_destroyed): New function.

	* LICENSE: New file.

	* backend/dll.c: Change license from GPL to relaxed GPL.
	* backend/hp.c: Ditto.
	* backend/hp.h: Ditto.
	* backend/mustek.c: Ditto.
	* backend/mustek.h: Ditto.
	* backend/net.c: Ditto.
	* backend/net.h: Ditto.
	* backend/pint.c: Ditto.
	* backend/pint.h: Ditto.
	* backend/pnm.c: Ditto.
	* backend/pnm.h: Ditto.
	* backend/qcam.c: Ditto.
	* backend/qcam.h: Ditto.
	* sanei/sanei_codec_ascii.c: Ditto.
	* sanei/sanei_codec_bin.c: Ditto.
	* sanei/sanei_constrain_value.c: Ditto.
	* sanei/sanei_init_debug.c: Ditto.
	* sanei/sanei_load_values.c: Ditto.
	* sanei/sanei_net.c: Ditto.
	* sanei/sanei_save_valus.c: Ditto.
	* sanei/sanei_scsi.c: Ditto.
	* sanei/sanei_wire.c: Ditto.

Fri Jun 13 18:35:47 1997  David Mosberger-Tang  <davidm@azstarnet.com>

	* lib/snprintf.c: New file (Patrick Powell).

	* frontend/xcam.c: Use guint32 and guint32 instead of u_int16_t
 	and u_int32_t (Tristan Tarrant).

	* doc/Makefile.in (SECT5): Mention sane-umax.5.

	* configure.in (PACKAGE_VERSION): Check for snprintf (Tristan

	* backend/dll.conf: Mention umax.

	* backend/umax-scanner.h: New file (from umax-0.5.5).
	* backend/umax-scsi.c: Ditto.
	* backend/umax-scsidef.h: Ditto.
	* backend/umax-struct.h: Ditto.
	* backend/umax-uc630.h: Ditto.
	* backend/umax-ug630.h: Ditto.
	* backend/umax-umax.c: Ditto.
	* backend/umax.conf: Ditto.
	* backend/umax.h: Ditto.
	* doc/sane-umax.5: Ditto.

	* backend/Makefile.in (PRELOADABLE_BACKENDS): Mention umax.
	(libsane-umax.la): List dependencies for umax library.

	* COPYING: New file.

	* include/sane/config.h.in: Add #undef HAVE_SNPRINTF.

Tue Jun 10 21:00:34 1997  David Mosberger-Tang  <davidm@azstarnet.com>

	* ltmain.sh: Upgrade to libtool-0.9g.

Sun Jun  8 21:24:27 1997  David Mosberger-Tang  <davidm@azstarnet.com>

	* backend/dll.c (load): Also check SHLIB_PATH (HP-UX) and LIBPATH

	* include/sane/config.h.in: Remove HAVE_GTK_GTKCURVE_H.

Sat Jun  7 11:19:57 1997  David Mosberger-Tang  <davidm@azstarnet.com>

	* frontend/xscanimage.c (pref_device_save): Call gsg_sync() before
	saving the values.

	* backend/Makefile.in (libsane-%.la): Add -export-dynamic flag.

	* frontend/xscanimage.c (query): Rename "/Extensions/" to "/Xtns/"
 	to reflect gimp-0.99.10 changes.
	(query): Don't put in separator---it confuses gimp.
	(main): Temporarily install a null print handler so gimp_main()
 	doesn't produce any ugly messages when program gets invoked in
 	stand-alone mode.

	* ltconfig: Upgrade libtool to version 0.9f.
	* ltmain.sh: Ditto.
	* config.guess: Ditto.
	* config.sub: Ditto.

	* frontend/Makefile.in (install): Define MKDIR as
	Use $(MKDIR) instead of mkdir.
	* backend/Makefile.in (install): Ditto.
	* doc/Makefile.in (install): Ditto.

	* mkinstalldirs: New file (from maint-0.1g).

Tue Jun  3 10:29:17 1997  David Mosberger-Tang  <davidm@azstarnet.com>

	* LEVEL2: New file.

Sun Jun  1 13:26:40 1997  David Mosberger-Tang  <davidm@azstarnet.com>

	* doc/Makefile.in (LATEX, DLH): New macros.
	(sane.ind): Prefix source filename with $(srcdir).
	(ps): Ditto.
	(html): Ditto.

	* doc/net.tex (subsection{SANE_NET_START}): Document member

	* sanei/sanei_net.c (sanei_w_start_reply): (De-)code BYTE_ORDER

	* frontend/saned.c (byte_order): New union.
	(process_request): Initialize byte_order member.

	* include/sane/sanei_net.h (SANE_Net_Byte_Order): New enum type.
	(SANE_Start_Reply): New member BYTE_ORDER.

Wed May 28 17:13:43 1997  David Mosberger-Tang  <davidm@azstarnet.com>

	* doc/Makefile.in (install): Create $(mandir)/man1 and
 	$(mandir)/man5 if necessary.

Tue May 27 09:31:39 1997  David Mosberger-Tang  <davidm@azstarnet.com>

	* backend/hp.c: Remove s7_range and s1_range.
	(attach): Add inquiry of min/max brightness/contrast and fill in
 	dev->brightness_range and dev->contrast_range accordingly.
	(init_options): Use s->hw->brightness_range instead of s7_range.
  	Use s->hw->contrast_range instead of s7_range.  Disable contrast
 	option if min value is same as max value.

	* backend/hp.h (struct HP_Device): Add members BRIGHTNESS_RANGE

	* sanei/sanei_scsi.c (sanei_scsi_open): Add more debug info.

Mon May 26 10:43:51 1997  David Mosberger-Tang  <davidm@azstarnet.com>

	* sanei/Makefile.in: Add definitions for VPATH, srcdir, top_srcdir,
 	and top_builddir.
	(INCLUDES): Move -I directives from CPPFLAGS to this macro.  Also
 	search in $(srcdir), $(top_builddir)/include, and

	* lib/Makefile.in: Add definitions for VPATH, srcdir, top_srcdir,
 	and top_builddir.
	(INCLUDES): Move -I directives from CPPFLAGS to this macro.  Also
 	search in $(srcdir), $(top_builddir)/include, and

	* include/Makefile.in: New file.

	* frontend/Makefile.in: Add definitions for VPATH, srcdir, top_srcdir,
 	and top_builddir.
	(INCLUDES): Also search in $(srcdir), $(top_builddir)/include, and
	(install): Add $(srcdir) prefix to sane-style.rc.

	* doc/Makefile.in: Add definitions for VPATH, srcdir, top_srcdir,
 	and top_builddir.
	(%.1 %.5): Use $^ instead of $* so source file can be found even
	when in a different directory.

	* configure.in (AC_OUTPUT): Create (dummy) include/Makefile to
	ensure include directory exists in build tree.

	* backend/Makefile.in: Add definitions for VPATH, srcdir,
 	top_srcdir, and top_builddir.
	(INCLUDES): Also search in $(srcdir), $(top_builddir)/include, and
	(CONFIGS): Add $(srcdir) prefix.
	(%-s.c): Ditto.

	* Makefile.in (INSTALLED_INCLUDES): Mention include/sane/config.h.
	Add definitions for VPATH, srcdir, top_srcdir, and top_builddir.
	(INSTALLED_INCLUDES): Change include/sane to $(top_srcdir)/include/sane
	and use "addprefix" function to add prefix.

Thu May 15 07:26:06 1997  David Mosberger-Tang  <davidm@azstarnet.com>

	* doc/sane-mustek.man (Model): Add entry for MFC-600CD.
	(Model): Mention AHA-2940.

	* frontend/xscanimage.c (scan_dialog): Move gsg_sync() to here
 	(from scan_start()).

	* backend/mustek.c (init_options): Disable brightness/contrast for
 	1-pass scanners only (in color mode).

Wed May 14 09:17:02 1997  David Mosberger-Tang  <davidm@azstarnet.com>

	* backend/mustek.c: Add ax_brightness_range, ax_contrast_range.
	(init_options): Use ax_brightness_range/ax_contrast_range for
	brightness/contrast option when using a 3-pass scanner.
	(encode_percentage): Remove extraneous division by 100.0.

	* doc/sane-mustek.man (Model): Add MFS-12000CX entry.

Mon May 12 07:58:34 1997  David Mosberger-Tang  <davidm@azstarnet.com>

	* frontend/scanimage.c (main): Shorten help string so it fits in
 	80 characters.

	* frontend/preview.c (paint_image): Only increment height if
 	height < p->image_height.

Sat May 10 14:43:05 1997  David Mosberger-Tang  <davidm@azstarnet.com>

	* Version 0.57 released.

	* backend/mustek.c (attach): Fix range to 220x300mm.
	(init_options): Initialize OPT_PREVIEW and OPT_GRAY_PREVIEW.
	(sane_control_option): Handle OPT_PREVIEW and OPT_GRAY_PREVIEW.
  	Do not allow OPT_NUM_OPTS to be set.
	(sane_get_parameters): Except for s->params.format and
 	s->params.last_frame, do not change any parameters when scanning
	is in progress.
	(sane_start): Handle mono-chrome previewing.

	* backend/mustek.h (Mustek_Option): Add OPT_PREVIEW and

	* frontend/progress.c (progress_new): Fix position of progress bar
 	window to (progress_x,progress_y).

	* frontend/gtkglue.c (panel_build): Skip Preview option.

Thu May  8 19:39:48 1997  David Mosberger-Tang  <davidm@azstarnet.com>

	* doc/scanimage.man: New file.

	* doc/Makefile.in (SECT1): Mention scanimage.1.

	* backend/dll.conf: Add hp to dll.conf.

Wed May  7 07:28:18 1997  David Mosberger-Tang  <davidm@azstarnet.com>

	* include/sane/sanei_scsi.h (SANEI_SCSI_Sense_Handler): New type.
	(sanei_scsi_close): Add SENSE_HANDLER argument (NULL means no
 	special handler needed).

	* backend/hp.c (sane_start): Pass 0 as SENSE_HANDLER argument.
	(attach): Ditto.

	* backend/mustek.c (sense_handler): Rename from request_sense and
	Remove all explicit request-sense calls.

	* sanei/sanei_scsi.c: Include <stdlib.h>.
	(num_handlers_alloced): New variable.
	(sense_handler): Ditto.
	(sanei_scsi_open): Add SENSE_HANDLER argument.  Stash it away in
 	SENSE_HANDLER array if non-NULL.
	(sanei_scsi_cmd) [HAVE_SYS_SG]: Invoke SENSE_HANDLER[FD] if it
 	exists and is non-NULL and we have a valid sense-buffer.
	(sanei_scsi_cmd) [HAVE_SYS_SCSI]: Ditto.
	(sanei_scsi_close): Reset SENSE_HANDLER[FD] to NULL if it exists.

	* frontend/xcam.c: Include <sane/config.h>.

	* configure.in: Add a big fat warning that PROBLEMS should be
	read before running any programs.

	* PROBLEMS: Add info on how to avoid damaging Mustek scanners.

Mon May  5 07:06:54 1997  David Mosberger-Tang  <davidm@azstarnet.com>

	* doc/sane.tex (chapter{Contact Information}): Fix URL.

	* doc/net.tex: Add missing sections.  Make into chapter.

	* backend/pint.README: Remove.

	* backend/dll.c (ASSERT_SPACE): Call malloc() when devlist is
 	NULL.  SunOS realloc() returns NULL otherwise.
	* backend/net.c (ASSERT_SPACE): Ditto.

Sun May  4 09:21:48 1997  David Mosberger-Tang  <davidm@azstarnet.com>

	* frontend/saned.c (EXIT_SUCCESS): Define as 0 if not defined by

	* frontend/scanimage.c: Include <sys/types.h>.

	* backend/qcam.c: Define PATH_MAX as 1024 if limits.h doesn't
 	define it.
	* backend/dll.c: Ditto.
	* backend/hp.c: Ditto.
	* backend/mustek.c: Ditto.
	* backend/net.c: Ditto.
	* backend/pint.c: Ditto.
	* backend/qcam.c: Ditto.
	* frontend/xscanimage.c: Ditto.
	* frontend/xcam.c: Ditto.
	* frontend/preview.c: Ditto.

	* sanei/sanei_wire.c: Include <sane/config.h>.
	* sanei/sanei_net.c: Ditto.
	* sanei/sanei_codec_ascii.c: Ditto.
	* sanei/sanei_codec_bin.c: Ditto.
	* sanei/sanei_save_values.c: Ditto.
	* backend/net.c: Ditto.
	* frontend/saned.c: Ditto.

	* configure.in (AC_CHECK_HEADERS): Mention

	* include/sane/config.h.in: Add

	* sanei/sanei_scsi.c [HAVE__USR_SRC_LINUX_INCLUDE_SCSI_SG_H]:
 	Include "/usr/src/linux/include/scsi/sg.
	(sanei_scsi_cmd): Use Linux version if either HAVE_SCSI_SG_H or

	* doc/xscanimage.man: Rename --no-shm to --no-xshm.

Mon Apr 28 09:55:02 1997  David Mosberger-Tang  <davidm@azstarnet.com>

	* Version 0.56 released.

	* backend/qcam.c (sane_open): Move disabling of despeckle-filter
	for b&w cameras to here (from init_options()).

	* frontend/preferences.c: Add missing default value for FILENAME.

	* backend/qcam.h: Add QC_BW_SET_CONTRAST,
 	QC_BW_AUTO_ADJUST_OFFSET, and QC_BW_GET_OFFSET.  * backend/qcam.c
 	(sane_start): Use QC_BW_SET_CONTRAST when dealing with B&W camera.
  	Fix computation of QC_SET_NUM_H value.  [Based on Guido Muensch's

	* frontend/scanimage.c (advance): Move out-of-memory error message
 	from scan_it() to here.
	(scan_it): When height is known a priori, allocate one extra line
 	to avoid realloc() when image has been filled.

	* backend/hp.c (BACKEND_NAME): Define as hp (reported by Henryk

	* backend/mustek.c (request_sense): Increase result size from 4 to
 	16 bytes to shut up aha1542 driver (reported by Mathias Lautner).

	* frontend/scanimage.c (advance): Fix memory allocation logic
	(bug reported by Matthias Lautner).

	* doc/sane-dll.man: Clarify that pre-loaded backends are not
 	affected by dll.conf.

	* doc/sane-pint.man: New file (contributed by Gordon Matzigkeit).

	* backend/dll.c (RTLD_NOW): Define as 0 if dlfcn.h doesn't define

Wed Apr 23 23:03:47 1997  Gordon Matzigkeit  <gord@gnu.ai.mit.edu>

	* backend/Makefile.in, frontend/Makefile.in: Specify full
 	filenames, rather than just the directory name for INSTALL
 	destinations.  This Automakeism helps debugging when the target
 	directory doesn't exist.

	* include/sane/config.h.in (HAVE_SYS_SCANIO_H): Define, for PINT's

	* backend/pint.c: Prefix sane includes with <sane/...>.

	* backend/dll.c (RTLD_NOW): Paramaterize, so that RTLD_LAZY is
	used if RTLD_NOW is not defined.
	(load): Try looking up the symbol with a leading underscore, if we
 	can't find it the first time.

	Make dynamic loading conditional on HAVE_DLOPEN rather than the
 	library and header file.

	* configure.in (enable_dynamic): Disable dynamic loading if the
	system doesn't have dlopen.

Tue Apr 22 00:17:41 1997  David Mosberger-Tang  <davidm@azstarnet.com>

	* Version 0.55 released.

	* frontend/xscanimage.c (browse_filename_callback): Initialize
	FILENAME before calling gsg_get_filename().

	* doc/sane.tex: Change obsolete \driver{DVIps} into DVIps document
 	style option.

	* frontend/xscanimage.c (query): Update to new command name

Mon Apr 21 08:27:28 1997  David Mosberger-Tang  <davidm@azstarnet.com>

	* doc/Makefile.in (install): Add rule to install man-pages.
	(%.1 %.5): Add rule to generate man-pages (by substituting
	actual paths).
	(SECT1): New variable.
	(SECT5): Ditto.
	(MANPAGES): Ditto.

	* doc/sane-pnm.man: New file.
	* backend/pnm.README: Deleted.

	* doc/sane-hp.man: New file.
	* backend/hp.README: Deleted.

	* doc/saned.man: New file.
	* frontend/saned.README: Deleted.

	* doc/sane-qcam.man: New file.
	* backend/qcam.README: Deleted.

	* doc/sane-mustek.man: New file.
	* backend/mustek.README: Deleted.

	* doc/sane-net.man: New file.
	* backend/net.README: Deleted.

	* doc/sane-dll.man: New file.
	* backend/dll.README: Deleted.

	* doc/xscanimage.man: New file.
	* frontend/xscanimage.README: Deleted.

	* frontend/preview.c (event_handler): Restore preview image only
	if preferences.preserve_preview is TRUE.

	* frontend/xscanimage.c (preview_options_dialog): Add an option
	to control whether the preview image should be preserved.

	* sanei/sanei_load_values.c (sanei_load_values): Copy string value
	into temporary buffer that is opt->size bytes long.  Then pass copy
	to sane_control_option().

	* AUTHORS (Backends): Updated according to recent changes.

	* doc/sane.tex (The SANE Application Programmer Interface (API)):
 	Fix typo: replace () by {}.

	* PROJECTS (Backend): Update PINT entry.

	* frontend/xscanimage.c (prog_name): New variable.
	(input_available): Use prog_name instead of hardcoding "xscan".
	(preview_options_ok_callback): Ditto.
	(preview_options_dialog): Ditto.
	(usage): Ditto.
	(interface): Ditto.
	(main): Initialize prog_name.

	* frontend/scanimage.c: Update for new name (scanimage instead of

	* frontend/Makefile.in (SCAN_OBJS): Rename sources to xscanimage.c
 	and scanimage.c as well.

Sun Apr 20 09:09:06 1997  David Mosberger-Tang  <davidm@azstarnet.com>

	* Version 0.54 released.

	* sanei/Makefile.in (LIBSANEI_LTOBJS): Remove @LTALLOCA@.

	* lib/Makefile.in: Invoke $(LIBTOOL) with --mode arg to avoid
 	depending on command names.  Prefix $(LIBTOOL) invocation with
	@-sign to reduce verbosity.
	* frontend/Makefile.in: Ditto.
	* backend/Makefile.in: Ditto.
	* sanei/Makefile.in: Ditto.
	* frontend/saned.c (_PATH_HEQUIV): Define if not defined yet..

	* configure.in: Check for libgimp/gimp.h instead of -lgimp since
	-lgimp cannot be linked by itself (it has an unresolved reference

	* lib/strndup.c (strndup): Include <stdlib.h>.

	* frontend/xscanimage.README: Update.

	* sanei/sanei_scsi.c: Add missing "int" type in front of

	* configure.in: Check for -lintl, -lsocket, and -lnsl for
 	braindamaged SVR4 systems.

	* frontend/scan.c (scan_it): Initialize min with 0xff, not ~0
	(Sun CC complains otherwise).

	* backend/Makefile.in: Use "ln -f -s", not "ln -sf", Solaris doesn't
	like the former.  Grrr...

	* lib/alloca.c: Don't use xmalloc().

	* frontend/saned.c (store_reclen): Declare BUF as a pointer to
 	SANE_Byte (not char).
	(do_scan): Ditto.

	* frontend/scan.c (fetch_options): Cast opt->name to (char *)
	to suppress (spurious) warning.

	* backend/dll.c (sane_init): Skip preloaded backends with no name.

	* backend/hp.c (inquire): Cast BUF to (char *) to avoid warning.
	(sane_read): Change type of NREAD to size_t (from ssize_t).

	* include/sane/sanei_backend.h (u_int16_t): Define u_int8_t,
 	u_int16_t, and u_int32_t if necessary.

	* include/sane/sane.h (sane_strstatus): Remove non-ANSI "const".
	* backend/sane_strstatus.c (sane_strstatus): Ditto

	* include/sane/sanei_debug.h (DBG): Define alternate version for
	non-GNU C compilers.

	* sanei/sanei_init_debug.c (sanei_debug) [!__GNUC__]: New function.
	(max_level) [!__GNUC__]: New variable.

	* include/sane/sanei_wire.h: Fix typo in prototype for

	* configure.in: Test for gtk_check_button_new() in libgtk.

	* lib/Makefile.in (CPPFLAGS): Add -I../include/sane.

	* frontend/scan.c (STRIP_HEIGHT): New macro.
	(advance): Use above macro instead of hard-coding value.
	(scan_it): Ditto.
	(scan_it): Print error when out of memory.

	* frontend/sane-style.rc: Make the curve in the graph red.

	* frontend/preview.c (XSERVER_WITH_BUGGY_VISUALS): Define for now.
	(preview_new): Avoid push_visual()/get_visual() since it seems to
 	cause problems with some XFree86 servers (and may be others as

	* frontend/preferences.h: Add member ADVANCED.
	* frontend/preferences.c: Initialize member ADVANCED and add
	an option descriptor for it.

	* frontend/gtkglue.c (panel_build): Layout panel different: all
 	options are now in one column (advanced options are at the
 	bottom).  The graph widget (if any), will be shown in a separate
 	column to the right of the options.  Display a group only when
 	there is at least one option in it.  Create graph widget if there
 	is at least one vector-valued option.
	(gsg_sync): New function.
	(gsg_set_advanced): Ditto.
	(gsg_message_dialog_active): Rename from SHOWING_MESSAGE and make

	* frontend/gtkglue.h (GSGDialog): Rename member NOTEBOOK to

	* frontend/gtkglue.c (group_new): New function.
	(curve_new): Ditto.
	(vector_new): Ditto.

	* backend/mustek.c (init_options): Initialize OPT_CUSTOM_GAMMA.
	(sane_control_option): Handle OPT_CUSTOM_GAMMA.

	* backend/mustek.h (OPT_CUSTOM_GAMMA): New option.

	* configure.in (AC_CONFIG_HEADER): Update for new location.

	* include/sane/config.h.in: Move to here from include/config.h.
	* *.[ch]: Replace <config.h> with <sane/config.h> (except for
	files in lib.

	* frontend/saned.README: saned moved from bin/saned to sbin/saned.

	* configure.in (AC_CHECK_HEADERS): Check for gtk/gtkcurve.h.

	* backend/mustek.c (init_options): Undo changes of April 18th.

	* frontend/Makefile.in (install): Install $(BINPROGS) in $(bindir)
 	and $(SBINPROGS) in $(sbindir).
	(SBINPROGS): New variable.
	(BINPROGS): Ditto.
	(PROGRAMS): Define as concatenation of the two vars above.
	(install): Create $(bindir) and $(sbindir) if necessary.

Sat Apr 19 18:21:02 1997  David Mosberger-Tang  <davidm@azstarnet.com>

	* frontend/Makefile.in (scanimage): Rename "scan" binary to
 	"scanimage" to avoid name-collision with MH's scan command.

	* backend/mustek.c (gamma_correction): Update according to new
	gamma-table handling.

	* backend/mustek.h: Declare gamma_table as 4 arrays of 256 words

	* backend/mustek.c (sane_control_option): Add missing return after

	* frontend/progress.h: Protect against multiple inclusion using
 	macro progress_h, not __PROGRESS_H__ (names starting with
 	underscores are reserved for libc/system).

	* frontend/gtkglue.c: Remove include of <gtk.h>.
	* frontend/xcam.c: Ditto.
	* frontend/xscan.c: Ditto.

	* frontend/gtkglue.h: Include <gtk/gtk.h> instead of <gtk.h>.
	* frontend/progress.c: Ditto.

	* Makefile.in (install): Install headerfiles.
	(INSTALLED_INCLUDES): List of header files that need to be

Sat Apr 19 18:15:03 1997  Michael K. Johnson <johnsonm@redhat.com>

	* */*.[ch]: Prefix sane-includes with <sane/...>.
	include/sane*: Move to include/sane subdirectory.

Sat Apr 19 08:25:36 1997  David Mosberger-Tang  <davidm@azstarnet.com>

	* frontend/gtkglue.c (set_option): Add missing return and use
	snprintf instead of sprintf.

	* frontend/xscan.c (update_param): Multiply size by 3 if we're
	dealing with a frame from a 3-pass image.

Fri Apr 18 07:28:46 1997  David Mosberger-Tang  <davidm@azstarnet.com>

	* backend/mustek.c (init_options): Mark all vector options as

	* frontend/scan.c (scan_it): Fail if advance() fails.

Thu Apr 17 08:59:00 1997  David Mosberger-Tang  <davidm@azstarnet.com>

	* backend/mustek.c (sane_read): Add debug statement.
	(reader_process): Remove extraneous if-statement that had the
 	effect of not passing along any data in 3-pass mode.

Wed Apr 16 09:16:01 1997  David Mosberger-Tang  <davidm@azstarnet.com>

	* frontend/preview.h: Add member CANCEL.
	* frontend/preview.c (scan_start): Make p->cancel sensitive.
	(scan_done): Make p->cancel insensitive.
	(preview_new): Set p->cancel insensitive.

	* frontend/preferences.h (Preferences): Add member "filename".
	* frontend/preferences.c: Initialize new member "filename".
	Declare member "filename" as a string.

	* frontend/xscan.c (device_dialog): Rename "Files" to "File".
	(quit_xscan): Call pref_xscan_save() before exiting.  Replace
	global variable filename by preferences.filename.

	* frontend/xcam.c (main): Ditto.

	* PROBLEMS: New file.

	* frontend/gtkglue.c (scale_new): Set the adjustment page size to
 	0.0.  Make horizontal scale 200 pixels wide.

	* frontend/xscan.c (device_dialog): Move gtk_widget_show
 	(ScanWin.shell) after pref_device_restore (0, 0).
	(pref_device_restore): Make arg-less since callback arguments must
 	not be used.
	(device_dialog): Remove dummy args from call to pref_device_restore().

	* include/saneopts.h (SANE_TITLE_SCAN_TL_X, SANE_TITLE_SCAN_TL_Y,

	* frontend/xcam.c (main): Move gtk_widget_show(win.shell) to end
	of function.

	* backend/mustek.c (attach): Turn on MUSTEK_FLAG_USE_EIGHTS for
	(sane_get_parameters): Must not depend on s->mode in this routine,
	since s->mode is valid only once scanning has begun.

Tue Apr 15 23:06:17 1997  David Mosberger-Tang  <davidm@azstarnet.com>

	* backend/mustek.c (sane_start): Issue SCAN_AREA and BACKTRACK
 	commands even during second and third pass.
	(sane_get_parameters): Be sure to properly update the
 	params.format member during second and third pass.

Sat Apr 12 11:40:52 1997  David Mosberger-Tang  <davidm@azstarnet.com>

	* frontend/scan.c (STRIP_HEIGHT): New macro.
	(scan_it): Fix typo: test parm.lines instead of image.height.

	* backend/pnm.c (hand_scanner): New variable.
	(sane_control_option): Handle setting/reading of HAND_SCANNER
	(getparmfromfile): Set parms.lines to -1 when simulating
	(sod): Add hand-scanner option descriptor.

	* frontend/gtkglue.c (panel_build): Move gtk_widget_show
 	(notebook) to the very of this function.  This works around the
 	notebook redrawing problems.  Define WORKING_NOTEBOOK.

	* frontend/xscan.c (interface): Call quit_xscan() if
 	device_dialog() did not end up with a non-NULL dialog.
	(quit_xscan): Add missing exit() call.

	* backend/mustek.c (attach): Print more debug info on detected
 	scanner (1 vs 3-pass, ADF & TA support).
	(start_scan): Fix typo in code selecting the three-pass color filter.

Sun Apr 13 23:53:02 1997  Gordon Matzigkeit  <gord@gnu.ai.mit.edu>

	* backend/pint.c, backend/pint.h, backend/pint.README: Added to

Fri Apr 11 22:04:17 1997  David Mosberger-Tang  <davidm@azstarnet.com>

	* Version 0.53 released.

	* frontend/xscan.c: Default to "out.pnm" instead of "out.ppm".

	* backend/mustek.c (get_image_status): Add debug message.
	(sane_start): Only divide pixels_per_line by three if we're doing
 	a one-pass color scan.
	(do_eof): New function.
	(sane_read): Call do_eof() when done with a frame.
	(do_cancel): Call do_eof().

	* frontend/scan.c (write_pnm_header): New function.
	(advance): Ditto.
	(scan_it): Modify to support three-pass scanning and scanning of
 	images whose height is not known a priori (hand-held scanners).

Wed Apr  9 14:39:59 1997  David Mosberger-Tang  <davidm@azstarnet.com>

	* frontend/xscan.c (ok_choose_dialog_callback): Make
	(select_device_callback): Declare event as second argument and
 	call ok_choose_dialog_callback() if the callback was invoked
 	through a double-click.
	(choose_device): Register select_device_callback() as
 	"button_press_event" handler instead of as "clicked" so we can
 	catch double-clicks.

Tue Apr  8 10:31:47 1997  David Mosberger-Tang  <davidm@azstarnet.com>

	* frontend/xscan.c (init): Enable gtk_rc_parse() code (GTK-0.99.7
 	requires patch for gtkstyle.c).

	* backend/hp.c (attach): Fix parenthization to shut up gcc.

Mon Apr  7 13:08:45 1997  David Mosberger-Tang  <davidm@azstarnet.com>

	* frontend/xscan.c (preview_options_dialog): Rename "changed_text"
	to "changed" to reflect latest GTK version.
	(device_dialog): Ditto.
	* frontend/gtkglue.c (text_entry_new): Ditto.

	* Version 0.52 released.

	* AUTHORS: Various updates.

	* backend/mustek.README: Add Adaptec info.

	* backend/mustek.c (sane_start): Call wait_ready() before any
	other scanner command.
	(wait_ready): New function.
	(attach): Call wait_ready() instead of open-coding it.

	* doc/sane.tex (subsection{\code{sane\_strstatus}}): Include
	* doc/net.tex: New file.

Thu Apr  3 08:51:13 1997  David Mosberger-Tang  <davidm@azstarnet.com>

	* frontend/xscan.c (update_param): Change type of SIZE to u_long
 	(from long) since under NetBSD there seem to be some odd sign
 	problems otherwise (compiler bug?).

Wed Apr  2 07:15:41 1997  David Mosberger-Tang  <davidm@azstarnet.com>

	* backend/mustek.c (sane_read): Always deliver EOF after reading
	0 bytes.

	* backend/qcam.c (reader_process): Fine-tune pixel interpolation.
	(despeckle32): Ignore last red pixel in every line (it's always
 	black).  Switch red and blue pixel location (the Connectix docs
 	are wrong).

	* backend/mustek.c (start_scan): Fix typo that caused start[4] to
	be set incorrectly.

	* frontend/preview.c: Include <sys/param.h> to get PATH_MAX.

Tue Apr  1 18:45:14 1997  David Mosberger-Tang  <davidm@azstarnet.com>

	* backend/qcam.c (despeckle): New function.
	(despeckle32): Ditto.
	(init_options): Initialize OPT_DESPECKLE.
	(reader_process): Add despeckling support.
	(sane_control_option): Ditto.
	(sane_start): Initialize req.despeckle.

	* backend/qcam.h: New member DESPECKLE.

	* frontend/preview.c (restore_option): Fix typo: it should be
 	SANE_ACTION_SET_VALUE (not _get_).

	* backend/mustek.c (attach): Turn on MUSTEK_FLAG_USE_EIGHTS for

	* backend/hp.c (attach): Allow both TYPE_PROCESSOR (0x03) and
	TYPE_SCANNER (0x06) as the first inquiry byte---some scanners use
	the former, others the latter.

	* Version 0.51 released.

	* configure.in: Check for gtk_tooltips_new in libgtk.

Mon Mar 31 14:42:56 1997  Gordon Matzigkeit  <gord@gnu.ai.mit.edu>

	* frontend/scan.c (main): Added full_optstring, to allow getopt to
	do full parsing of the option arguments.

	* backend/pnm.c (getparmfromfile): Need to round up the number of
	bytes per line when scanning bitmaps.

Mon Mar 31 07:48:50 1997  David Mosberger-Tang  <davidm@azstarnet.com>

	* backend/qcam.c (attach): Send a dummy black-level command.  The
 	first black-level command aftera camera reset doesn't appear to

	* lib/strndup.c: Correct typo: HAVE_STRDUP -> HAVE_STRNDUP.

	* frontend/xscan.c (pref_set_tooltips): New function.
	(pref_build_menu): Build tooltip submenu.

	* frontend/preferences.h: New member TOOLTIPS_ENABLED.
	* frontend/preferences.c: Add entry for TOOLTIPS_ENABLED.

	* frontend/gtkglue.h: Add members TOOLTIPS, TOOLTIPS_FG, and

	* frontend/gtkglue.c (set_tooltip): New function.
	(autobutton_new): Add argument TOOLTIPS and add button-description
 	via set_tooltip().
	(button_new): New args TOOLTIPS & DESC.  Set DESC as tooltip help
	(scale_new): Ditto.
	(option_menu_new): Ditto.
	(text_entry_new): Ditto.
	(panel_destroy): Destroy dialog tooltips as well.
	(panel_build): Create tooltips and allocate colors for it; pass
	new args to above functions.
	(gsg_set_tooltips): New function.

	* Version 0.5 released.

	* backend/Makefile.in (install): Add missing double-quotes to
 	$(LIBS) and $(CONFIGS).  Also create a symlink for libsane.a.

	* ltconfig: Revert back to version 0.9.
	* ltmain.sh: Ditto.

	* frontend/scan.c (print_option): Substitute our own help string
 	for -x and -y options.
	(main): Remove BROKEN_GETOPT code.

	* frontend/Makefile.in (CPPFLAGS): Undo yesterday's change.
	* lib/getopt1.c: Ditto.
	* lib/getopt.c: Ditto.

	* frontend/scan.c (main): Add some clever getopt () hackery to
 	work around multi-scan getopt () bug (patch by Gord Matzigkeit).

	* backend/qcam.README: Correct path of configuration file.

Sun Mar 30 21:42:12 1997  David Mosberger-Tang  <davidm@azstarnet.com>

	* frontend/Makefile.in (CPPFLAGS): Add back -DBROKEN_GETOPT.

	* frontend/scan.c (main): Reinstantiate BROKEN_GETOPT code.
	getopt_long() is _STILL_ broken. ;-(

	* lib/getopt.c: Use this code if __GNU_LIBRARY__ <= 6.  Early
	versions of glibc had a buggy getopt().
	* lib/getopt1.c: Ditto.

	* frontend/Makefile.in (xscan): Mention $(LIBSANEI).

	* frontend/xscan.c: Include <libgimp/gimp.h>, not <gimp.h>.

	* Makefile.in (distclean): Mention libtool.
	* configure.in (AC_CHECK_FUNCS): Ditto.

	* include/config.h.in: Add undef of STRSEP.

	* sanei/sane_strstatus.c: Move to backend directory to minimize
	chance of confusing this with a SANE-internal routine.

	* sanei/Makefile.in (LIBSANEI_OBJS): Remove sane_strstatus.o.
	(LIBSANEI_LTOBJS):  Remove sane_strstatus.lo.

	* backend/Makefile.in (libsane-%.la): Mention sane_strstatus.lo
 	explicitly (every SANE backend library MUST define this function
	so we can switch backends at will).

	* frontend/Makefile.in (SCAN_OBJS): Remove getopt.o, getopt1.o.

	* Makefile.in (SUBDIRS): Mention lib as first directory.

	* configure.in (AC_OUTPUT): Mention lib/Makefile.

	* lib/strsep.c: New file.
	* lib/strndup.c: Ditto.
	* lib/Makefile.in: Ditto.

	* sanei/test_wire.c (main): Initialize codecs through

	* sanei/sanei_codec_bin.c (sanei_codec_bin_init): Ditto.

	* sanei/sanei_codec_ascii.c (sanei_codec_ascii_init): Remove
 	w->buffer initalization---this function should be called through
	sanei_w_init () only.

	* sanei/sanei_scsi.c: Rename _sanei_scsi_max_request_size to

	* backend/mustek.c (reader_process): Rename macro

	* include/sanei_scsi.h: Rename _sanei_scsi_max_request_size to
 	sanei_scsi_max_request_size (names with a leading underscore are
 	reserved for libc/system).

	* frontend/scan.c (main): Add a brief description of the program.

	* frontend/getopt.c: Move to lib.
	* frontend/getopt1.c: Ditto.

	* backend/pnm.c (enum ppm_type): Remove non-ANSI trailing comma.
	Correct struct indentation.

	* include/lalloca.h: Isolate alloca cruft in this file.
	* frontend/gtkglue.c: Include lalloca.h in place of alloca hack.
	* frontend/dll.c: Ditto.
	* frontend/scan.c: Ditto.
	* sanei/sanei_load_values.c: Ditto.
	* sanei/sanei_scsi.c: Ditto.

Sat Mar 29 00:14:37 1997  Gordon Matzigkeit  <gord@gnu.ai.mit.edu>

	* backend/pnm.c (sane_read): Slurp in RGB files all at once,
	rather than limping along three bytes at a time.

	* frontend/xscan.c (advance): Only define if HAVE_LIBGIMP.

	* backend/pnm.c (sane_read, sane_start, getparmfromfile): Handle
 	grayscale and monochrome bitmapped PNM files.

	* frontend/scan.c (main): Remove BROKEN_GETOPT workaround---the
	new getopt() works properly when making multiple passes over the
	argument list.

Fri Mar 28 21:33:36 1997  Gordon Matzigkeit  <gord@gnu.ai.mit.edu>

	* configure.in: Make the QuickCam device conditional on whether or
 	not the ioperm function exists.

	* sanei/sanei_scsi.c: created a stubbed version of sanei_scsi_cmd.

	* frontend/scan.c (main): Only print error messages to stderr.
	Use fputs or fputc when it is possible to avoid printf.

	* sanei/sanei_wire.c (sanei_w_array, sanei_w_ptr, sanei_w_init),
 	sanei/sanei_save_values.c (sanei_save_values),
 	sanei/sanei_codec_ascii.c (ascii_w_string): Return an error if
 	malloc fails.

	* sanei/test_wire.c (main): Added --readonly flag to help test
	wire robustness.

	* backend/Makefile.in (LIBSANEI): Deleted the `EXTRA' variable,
	and used the convenience library, ../sanei/libsanei.a.

Sat Mar 29 10:19:58 1997  David Mosberger-Tang  <davidm@azstarnet.com>

	* doc/sane.tex: Change version from 0.42 to 0.5.

	* README: Add pointer to frontend & backend specific README files.

	* backend/net.c (connect_dev): Ensure dev->ctl gets closed and
 	reset to -1 in case of failure.

	* configure.in: Look for gtk_preview_new() in libgtk so we can
	ignore old GTK versions against which we can't build.

	* (config.sub): Replace with version that comes with
 	autoconf-2.12.  The version that came with libtool-0.9
	doesn't like i686-unknown-linux.

Fri Mar 28 13:12:17 1997  David Mosberger-Tang  <davidm@azstarnet.com>

	* doc/sane.tex (subsection{sane_get_select_fd}): Remove extraneous

	* backend/stubs.c (sane_cancel): Don't return anything.

	* include/sane.h: Remove trailing comma (for -pedantic).

	* frontend/xscan.c (interface): Complain when trying to call
	a device that's unavailable.
	(select_device_callback): Correct prototype.

	* frontend/xcam.c (main): Remove unused variable `label.'

	* backend/net.c (sane_cancel): Call SANE_NET_CANCEL.
	(sane_start): Handle failure of SANE_NET_START.

	* frontend/saned.c (process_request): Implement SANE_NET_CANCEL.

	* frontend/gtkglue.h (GSGDialogElement): Remove member "label".
	* frontend/gtkglue.c: Update accordingly.
	(button_new): Use gtk_check_button_new_with_label () to simplify
	this function.

	* frontend/gtkglue.c (unit_string): New function.
	(panel_build): Append unit_string () to option's title if
	the unit is not SANE_UNIT_NONE.  Use "title" instead of opt->title
	when creating widgets.

	* frontend/preview.c (preview_update): Compute width/height as
	(max - min + eps) where eps is 1 for integer coordinates and
 	SANE_UNFIX(1) for fixed-point coordinates.
	(display_partial_image): Support different scaling in x/y
 	direction.  In the case where surface_unit == SANE_UNIT_PIXEL,
 	compute xscale/yscale based on the ratio between the _expected_
 	width/height and the actual width/height.  If they're not equal,
 	the backend must be doing some scaling (e.g., transfer-scale in
 	the qcam backend).

	* frontend/xscan.c (init): Disable gtk_rc_parse () calls for now
	since gtk styles seem to be a bit buggy right now.
	(scan_done): Remove input_tag if it is >= 0.

	* frontend/gtkglue.c: Include <preferences.h>.
	(panel_build): For fixed-point range-constraints scale min/max/quant
	based on the preferred metric.
	(scale_update): Ditto.
	(gsg_update_scan_window): Ditto.

	* backend/mustek.c (sane_control_option): For OPT_GAMMA_VECTOR_*
 	options, fail with SANE_STATUS_INVAL if the vector has zero length
 	(i.e., hasn't been set yet).

	* frontend/progress.c (progress_new): Don't make Cancel the
 	default-button---it's too easy to cancel by mistake otherwise.

	* frontend/sane-style.rc: New file.

	* frontend/xscan.c (init): New function.  Parse gtk_rc_parse ()
	on /usr/local/share/sane-style.rc and ~/.sane/sane-style.rc if
	those files exist.

	* configure.in (CPPFLAGS): Add PATH_SANE_DATA_DIR.

	* frontend/gtkglue.c (gsg_warning): New function.
	(gsg_message): New function.
	(gsg_error): Implement in terms of gsg_message ().

Thu Mar 27 16:52:27 1997  David Mosberger-Tang  <davidm@azstarnet.com>

	* frontend/gtkglue.c (gsg_make_path): Terminate buffer with '\0'
	before attempting mkdir().

	* frontend/xcam.c (main): Use gtk_menu_item_new_label () instead
	of gtk_label_new ()/gtk_menu_item_new ().

	* frontend/preview.c (establish_selection): Invoke
 	param_change_callback only if non-NULL.
	(preview_update): Convert scale range to inches if that's user's

	* frontend/xcam.c (delayed_switch): New function.
	(device_activate_callback): Call delayed_switch() rather than
 	executing that code directly.  Pete tells me GTK is not designed
 	to have a widget rebuilt while a submenu is active.

	* frontend/gtkglue.c (panel_build): Avoid using notebook widget
 	until GTK+ has been fixed.
	(idle_handler): New function: rebuild dialog if dialog->rebuild is
	(set_option): Set dialog->rebuild to TRUE and schedule
 	idle_handler() rather than directly calling panel_rebuild().  Pete
 	tells me GTK is not designed to have a widget rebuilt while a
 	submenu is active.
	(gsg_refresh_dialog): Ditto.

Thu Mar 27 14:54:23 1997  Gordon Matzigkeit  <gord@gnu.ai.mit.edu>

	* backend/Makefile.in: Converted all for statements that might be
	empty to use a temporary list variable.

	* frontend/Makefile.in (scan): Added getopt.o, getopt1.o to scan

	* frontend/getopt.c, frontend/getopt1.c, include/getopt.h: Added
	to the distribution.

	* backend/net.c (connect_dev), frontend/saned.c (main): Don't use
 	TCP_NODELAY if it has not been defined.  Look up tcp protocol
 	number if SOL_TCP is not defined.

	* sanei/test_wire.c (main): lseek after changing direction, or the
	direction change ends up at the end of the output file.
	Added option parsing, a usage message, and other cleanups.

	* sanei/sanei_codec_ascii.c (sanei_codec_ascii_init),
 	sanei/sanei_codec_bin.c (sanei_codec_bin_init): Initialize the
 	wire if it has a 0-length buffer.

	* sanei/sanei_wire.c (sanei_w_init): Only call the codec_init_func
	if it is not NULL.

	* sanei/sanei_scsi.c: Parameterize inclusion of generic SCSI
	headers based on HAVE_SCSI_SG_H, HAVE_SYS_SCSI_H, or

	* configure.in (AC_CHECK_HEADERS): Check for scsi/sg.h,
	sys/scsi.h, and sys/scsiio.h.

	* sanei/sanei_load_values.c, sanei/sanei_scsi.c, backend/dll.c:
 	Replaced unconditional alloca.h include with the cruft suggested
 	by the Autoconf manual.

	* sanei/alloca.c: Add to distribution.

	* sanei/Makefile.in: Eliminate GNU make dependencies, and use
	@ALLOCA@ and @LTALLOCA@ as appropriate.

	* configure.in (AM_FUNC_ALLOCA): Use it.

	* aclocal.m4 (AM_FUNC_ALLOCA): Define it.

Wed Mar 26 17:25:49 1997  David Mosberger-Tang  <davidm@azstarnet.com>

	* sanei/sanei_wire.c (sanei_w_status): Update *v only when decoding.
	(sanei_w_bool): Ditto.
	(sanei_w_constraint_type): Ditto.
	(sanei_w_value_type): Ditto.
	(sanei_w_unit): Ditto.
	(sanei_w_action): Ditto.
	(sanei_w_frame): Ditto.

	* frontend/xscan.c (quit_xscan): Always invoke gtk_main_quit()
	(not just in standalone mode).
	(quit_callback): Correct prototype.

	* backend/pnm.c (sod): Fix doc-string for option "three-pass".

	* frontend/xscan.c (advance): New function.
	(input_available): Support 1 bpp frames.  Call advance() instead
 	of open-coding it.  Add RED/GREEN/BLUE frame support in GIMP mode.
	Complain when encountering unknown depth.
	(ScanWin): add member first_frame.
	(scan_start): Initialize first_frame and frame_offset in
	GIMP mode.

	* Integrate force unidirectional mode patch by Guido Muesch
	* backend/qcam.c (attach): Force uni-directional mode if port
	address starts with `u'.
	(attach): Add debug statement to print QCam version.

	* Integrate 3-pass patches by Heiko
	* backend/mustek.cb
 	(scan_area_and_windows): Use 1/8" mode when MUSTEK_FLAG_USE_EIGHTS
 	is on (instead of pixel unit).
	(mode_select): Set bit 3 in mode byte only if
	(encode_resolution): Don't do funky encoding for 3-pass scanners
 	in 10% resolution mode.  It seems the docs are wrong and the
 	actual scanners require a much simpler setup.

	* frontend/preview.h: Add include of <sys/types.h>.

Sat Mar 22 16:37:34 1997  David Mosberger-Tang  <davidm@azstarnet.com>

	* frontend/xscan.c (input_available): Reset ScanWin.x to zero at
 	the end of each line.
	(input_available): Reset tile_offset to zero after updating a
	(scan_done): Call gimp_display_new() to display the newly acquired
	image.  Draw final few lines of image if image height is not a multiple
	of the tile-height.

	* frontend/saned.c (process_request): quit when receiving
	unexpected procedure number---ignoring is dangerous.

	* backend/dll.c (load): Fix off-by-one bug in allocation of

	* frontend/xcam.c (prompt_for_device_name): Move grab-default
	call behind signal_connect since otherwise the default action
	won't work.

	* frontend/xscan.c (choose_device): Let "Ok" button be the one
	that gets activated by default (by hitting the Return key).

	* frontend/preview.c (preview_destroy): Rename save_preview_image
	to preserve_preview_image.
  	* frontend/preview.h: Ditto.

	* frontend/preview.c (restore_preview_image): New function.
	(preview_destroy): Save preview image if it exists.
	(preview_scan): New parameter SELECTION_ONLY.  If true,
 	preview-scanning is limited to the selected area.

	* frontend/xscan.c (scan_done): Call quit_xscan() to exit.
	(quit_xscan): Destroy preview if ScanWin.preview is non-NULL.

	* frontend/preview.c (draw_selection): Don't draw if p->gc is
	NULL (i.e., if windows aren't mapped yet).

	* frontend/xscan.c: Move HAVE_LIBGIMP-specific code further
	down (past the type & global variable decls).

	* configure.in (CPPFLAGS): Make --disable-shared impy

	* include/config.h.in: Add HAVE_STRNDUP.

Fri Mar 21 00:01:00 1997  David Mosberger-Tang  <davidm@azstarnet.com>

	* sanei/sanei_scsi.c (sanei_scsi_cmd): Implemented FreeBSD
	version (untested).

	* sanei/sanei_load_values.c: Include <alloca.h>

	* frontend/preview.c (update_selection): New function to set
	selection based on current scan-area option values.
	(preview_update): Call update_selection ().

	* sanei/sanei_save_values.c: Add copyright notice.
	* sanei/sanei_load_values.c: Add copyright notice and explanation
	of algorithm.
	(BITS_PER_LONG): New macro.
	(SET): Ditto.
	(IS_SET): Ditto.
	(sanei_load_values): Add variables caused_reload and keep_going to
	keep track of what options caused a reload_option and whether
	the whole option-value setting process should be repeated.

	* include/config.h.in: Add #undef HAVE_LIBGIMP.
	* frontend/xscan.c: Put all GIMP-dependencies inside
	Include <config.h>.

	* sanei/sanei_wire.c (sanei_w_init): Initialize status to 0.
	(sanei_w_free): Preserve existing direction and do not flush i/o.
	(sanei_w_space): Return EINVAL if reading 0 bytes.

Thu Mar 20 09:11:21 1997  David Mosberger-Tang  <davidm@azstarnet.com>

	* frontend/gtkglue.h (dev_name): New member.
	* frontend/gtkglue.c (gsg_destroy_dialog): free dialog->dev_name.
	(gsg_create_dialog): Keep copy of device name in dev_name member.

	* include/sanei_backend.h: Move stubs into backend/stubs.c and
	define redirection macros only if STUBS is not defined.
	* backend/stubs.c: New file.

	* configure.in (AC_PROG_RANLIB): Removed.  No longer needed with
	* (frontend/Makefile.in): Adapt to libtool.
	* (backend/Makefile.in): Ditto.
	* (sanei/Makefile.in): Ditto.

	* backend/mustek.c (attach): Check result[0] == 0x06 to find out
 	whether we're dealing with a scanner (rather than attemting to
 	find the string "SCANNER" ).

	* backend/hp.c (sane_read): Initialize nread with max_len, not
	(sane_get_parameters): Add missing `== 0' comparison for strcmp()
	(inquire): Generalize so we can inquire any quantity and improve
	(attach): Use reasonable default value if inquiry of a quantity
	(sane_start): Report error if inquiry of a scan parameter fails.

Wed Mar 19 18:03:38 1997  David Mosberger-Tang  <davidm@azstarnet.com>

	* frontend/xcam.c (prompt_for_device_name): grab default for OK
 	button (doesn't seem to work, though).

	* frontend/progress.c (progress_new): Connect progress_cancel()
 	via signal_connect(), not signal_connect_object() and pass P, not
	(progress_cancel): Don't free progress structure (must be done by

	* frontend/xscan.c (input_available): New function.
	(scan_done): Ditto.
	(scan_start): Ditto.
	(progress_cancel): Simply call sane_cancel().
	(scan_dialog): Moved most of the code to above functions.

	* frontend/gtkglue.c (get_filename_button_clicked): New function.
	(gsg_get_filename): Ditto.

	* frontend/xscan.c (scan_dialog): Do not quit xscan when in
	standalone mode.
	(scan_dialog): Prompt for output filename in standalone mode.
	(filename): New variable.

	* backend/pnm.c (sane_control_option): Remove "pnm." prefix
	in debug messages.

	* backend/qcam.c (sane_cancel): Remove "qcam." prefix in debug

	* backend/mustek.c: Remove "mustek." prefix in debug messages.

Tue Mar 18 17:30:29 1997  David Mosberger-Tang  <davidm@azstarnet.com>

	* backend/mustek.c (sane_close): Remove superfluous "[mustek]" in
 	debug string.

	* sanei/sanei_scsi.c (sanei_scsi_cmd): Implement HP-UX version
	of this function (untested).

	* backend/qcam.c (reader_process): Enable code to handle 4 bpp
	and 6 bpp cases.

Thu Mar 13 13:15:21 1997  David Mosberger-Tang  <davidm@azstarnet.com>

	* doc/sane.tex (subsection{Scan Area Options}): Attempt to
	clarify the meaning of "top-left" corner.

Tue Mar 11 07:12:53 1997  David Mosberger-Tang  <davidm@azstarnet.com>

	* frontend/gtkglue.c (panel_build): Fix typo in matching of
	"resolution" option (missing == 0).

Mon Mar 10 20:19:06 1997  David Mosberger-Tang  <davidm@azstarnet.com>

	* Announced pre0.5 snapshot.

	* backend/qcam.h: Make transfer-scale part of the "mode" group.

	* backend/qcam.c (sane_read): Moved return of SANE_STATUS_EOF
 	behind test for delivering EOF.

	* frontend/xscan.c (device_dialog): Relabel "Cancel" button to

	* backend/qcam.c (init_options): Set SANE_CAP_ADVANCED for geometry
	* backend/mustek.c (init_options): Ditto.

	* backend/pnm.c (pass, three_pass): New variables.
	(sod): Add option "three-pass" to simulate a three-pass scanner.
	(sane_control_option): Add support for three_pass option.
	(getparmfromfile): In three-pass mode, set format and last_frame
	based on `pass'.
	(sane_start): If input file is open already, fail unless we're
	scanning the next frame of a three-pass image.
	(sane_read): Handle three-pass case.

Sun Mar  9 13:20:19 1997  David Mosberger-Tang  <davidm@azstarnet.com>

	* frontend/gtkglue.c (text_entry_callback): Only call
 	gtk_entry_set_text() if the backend modified the string.  Otherwise,
	infinite recursion occurs on any change (since the change results
	in a change...).

	* frontend/xcam.c (next_frame): Reset win.remaining to zero.

	* backend/qcam.c (init_options): Set size of "resolution" option
	to sizeof("High").

	* doc/sane.tex (subsection{Scan Area Options}): Allow word-list
	as a constraint.

	* configure.in (CFLAGS): Add -D_GNU_SOURCE to CFLAGS since we
	now depend on snprintf ().

	* frontend/xscan.c (device_dialog): Fix typo: PixelHeight should
 	be > 0, not == 0 in order for us to create the preview window.
	(device_dialog): Ditto.
	(device_dialog): Add ScanWin.preview to frame container.

Sat Mar  8 10:19:41 1997  David Mosberger-Tang  <davidm@azstarnet.com>

	* doc/sane.tex (subsection{sane_get_select_fd}): Clarify what
	must happen when the end of a frame has been reached.

	* frontend/xcam.c (input_available): Stop when sane_read() returns
	0 bytes.  Fix typo: win.data needs to be set to dst, not src, on

	* backend/qcam.h (read_fd): New member.
	* backend/qcam.c (sane_get_select_fd): Return read_fd instead of
	(sane_open): Initialize s->read_fd to -1.
	(sane_close): Close s->select_fd if >= 0.
	(sane_start): Make read_fd dup() of s->from_child.
	(sane_cancel): Close s->read_fd if >= 0.
	(sane_set_io_mode): Modify s->read_fd instead of s->from_child.

	* frontend/scan.c: Include <sanei.h> for NELEMS macro.
	* frontend/xcam.c: Ditto.

	* configure.in (CPPFLAGS): Add defines for V_MAJOR and V_MINOR.
	(V_MAJOR, V_MINOR): New variables.

	* sanei/Makefile.in (SANEI_OBJS): Mention sanei_net.o.

	* include/sanei_net.h: New file (split from sanei_wire.h).
	* sanei/sanei_net.c: New file  (split from sanei_wire.c).

	* configure.in: Add -Wall to CFLAGS when using gcc.

	* frontend/Makefile.in (saned): List -lsanei before -lsane
	so saned never depends on sanei_*-routines that may be present
	in -lsane (the only dependencies for that library must be
	on sane_* names).

	* backend/Makefile.in (LIBS): Remove -ldl (configure will add
	it if available).
	(SHLDFLAGS): Use -usanei_init instead of --whole-archive option.
	(SHLDPOSTFLAGS): Remove --no-whole-archive.

	* backend/dll.c: Add include of <config.h>.
	(DYNAMIC): New macro.  Defined it dynamic loading support is
	available and enabled.
	Include <dlfcn.h> only when DYNAMIC is defined.
	(load): Make no-op when DYNAMIC is not defined.
	(sane_exit): Never call dlclose() if DYNAMIC is not defined.

	* include/sanei_scsi.h: Rename from genscsi.h and rename prefix
	from `genscsi_' to `sanei_scsi_'.
	* sanei/sanei_scsi.c: Ditto.
	* backend/mustek.c: Rename `genscsi_' to `sanei_scsi_'.

	* configure.in: Check for availability of -ldl and <dlfcn.h>.

Fri Mar  7 15:21:38 1997  David Mosberger-Tang  <davidm@azstarnet.com>

	* sanei/sanei_wire.c: New file.
	* sanei/sanei_codec_bin.c: Ditto.
	* sanei/sanei_codec_ascii.c: Ditto.

	* backend/dll.c (sane_exit): Call dlclose() only if handle is
	(sane_init): Chain together preloaded backends.

	* backend/qcam.c (attach): Make static.
	(sighandler): Ditto.
	(qc_getstatus): Ditto.
	* backend/mustek.c (attach): Ditto.

	* backend/dll.c (op_name): Remove `sane_' prefix.

	* sanei/sanei_init_debug.c (sanei_init_debug): Upcase backend
	name when building environment variable name.

	* backend/genscsi.c: Make use of sanei_debug.h.

	* backend/mustek.c: Adapt to use sanei_backend.h.
	* backend/net.c: Ditto.
	* backend/pnm.c: Ditto.
	* backend/qcam.c: Ditto.

	* backend/dll.c (sane_exit): Fix typo that resulted in the
	last backend not being exited.

Thu Mar  6 21:25:27 1997  David Mosberger-Tang  <davidm@azstarnet.com>

	* doc/sane.tex (subsection{\code{sane\_init}}): Allow
 	authorization callbacks during sane_start() but not during

Tue Mar  4 21:04:16 1997  David Mosberger-Tang  <davidm@azstarnet.com>

	* backend/mustek.c (sane_close): Print debug message when trying
	to close an unknown handle.

Thu Feb 27 18:10:20 1997  David Mosberger-Tang  <davidm@azstarnet.com>

	* doc/sane.tex (chapter{Contact Information}\label{chap:contact}):
	Add `listserv.' to mailing list address---seems to be needed for
	subscriptions etc.

Sun Feb  9 12:54:20 1997  David Mosberger-Tang  <davidm@azstarnet.com>

	* backend/mustek.README: Add pointer to Ingmar's 53c400 patch.

Sat Feb  8 11:49:24 1997  David Mosberger-Tang  <davidm@azstarnet.com>

	* backend/mustek.c (line_distance): Add more debug output.

Fri Feb  7 19:21:36 1997  David Mosberger-Tang  <davidm@azstarnet.com>

	* backend/mustek.c (line_distance): Remove erroneous #ifdef
	around FACTOR and COLOR.

	* doc/sane.tex (subsection{sane_init}): Make username/password
	fixed length arrays so no malloc/free magic is needed.
	(subsection{Preview Mode Option}): New section.

	* include/sane.h: Ditto.

	* include/sane.h (SANE_Char): New type.

Tue Feb  4 18:47:52 1997  David Mosberger-Tang  <davidm@azstarnet.com>

	* backend/mustek.c (sane_get_parameters): Correct typo: replace
	s->pass with s->params.format.

Fri Jan 31 16:16:26 1997  David Mosberger-Tang  <davidm@azstarnet.com>

	* backend/mustek.c (attach): Print debug message when using
 	special line-distance algorithm.
	Enable special line-distance algorithm only for firmware
 	revisions < 1.02.
	Determine fw revision based on INQUIRY result.

Thu Jan 30 21:22:38 1997  David Mosberger-Tang  <davidm@azstarnet.com>

	* doc/sane.tex (section{Attaching to a SANE backend}): Rename
	metanet -> net, netproxy -> saned, metadl -> dll and update
	hierarchy figure as well.  Added autolum meta backend as a
	filter example.

	* TODO: Rename metanet -> net, metadl -> dll.

	* AUTHORS (Frontends): Rename metanet -> net, metadl -> dll,
	mention saned and xcam and sort entries alphabetically.

	* backend/net.c (sane_control_option): Replace all occurances of
 	metanet with net.
	* backend/net.README: Ditto.

	* backend/dll.README: Replace all occurances of metadl with dll.
	* backend/dll.c: Ditto.

	* backend/dll.conf: Comment out metanet since it's a bit of a
 	security risk (no authentication just yet).

	* backend/Makefile.in (CONFIGS): New macro (list of config files)
	(install): Change install rule so existing configuration files
	are not overwritten.
	Replace all occurances of metanet with net.

	(V_MINOR): Bump up to 43.

Tue Jan 28 08:17:18 1997  David Mosberger-Tang  <davidm@azstarnet.com>

	* frontend/Makefile (saned): Mention -lsanei before -lsane so
 	saned does not incorrectly depend on sanei_printf/sanei_scanf in
 	-lsane (if it happens to define those symbols).

	* backend/metanet.c (sane_init): Rename SANE_Authorization_Callback
	to SANE_Auth_Callback.
	* backend/mustek.c (sane_init): Ditto.
	* backend/pnm.c (sane_init): Ditto.
	* backend/metadl.c (sane_init): Ditto.

	* frontend/saned.c (main): Put output socket in TCP_NODELAY mode.
	Include of <sys/socket.h>

	* backend/metanet.c (openit): Ditto.

Mon Jan 27 19:32:29 1997  David Mosberger-Tang  <davidm@azstarnet.com>

	* doc/sane.tex (subsection{Device Descriptor Type}): Change vendor
 	name "None" to "Noname".
	* backend/pnm.c (dev): Change vendor name from "noname" to "Noname".

	* include/sane.h (SANE_STATUS_ACCESS_DENIED): New status value.
	* sanei/sane_strstatus.c (sane_strstatus): Return appropriate
	status string.

	* frontend/xscan.c (scan_dialog): Don't depend on first_frame
	when creating image---the old code didn't work for R/G/B-only
	frames anyhow, so there is no point pretending.

	* include/sane.h (SANE_Parameters): Rename first_frame to
	* backend/metanet.c (sane_get_parameters): Update accordingly.
	* backend/qcam.c (sane_get_parameters): Ditto.
	* frontend/saned.c (readcmd): Ditto.
	* frontend/test.c (testsane): Ditto.
	* backend/mustek.c (sane_get_parameters): Set last_frame unless
	the current pass is acquiring a red- or green-only frame.

	* doc/sane.tex (subsection{sane_get_parameters)): Change

	* backend/metanet.c: Initialize PEER with -1.
	(sane_get_select_fd): Return PEER and succeed if not negative.

	* include/netsane.h (ns_printf, ns_scanf, netfd_wr, netfd_rd):
 	Remove (obsolete).

	* frontend/saned.c: Increase STRBUF size to 32KB to get better
	scan_read() throughput.

	* include/sane.h (SANE_Athorization_Callback): Return void
 	(instead of int) and make USERNAME and PASSWORD (pointers to)
 	return values.

	* frontend/saned.c (netsane_auth_callback): Update prototype.

	* backend/metanet.c (sane_init): Move assignments out of
 	if-conditional for clarity (and to avoid gcc warning).

	* sanei/sanei_printf.c: Include <memory.h>, <string.h>.

	* backend/Makefile.in (libsane-mustek.a): Replace
 	../sanei/sane_strstatus.o with appropriately defined EXTRA

	* backend/mustek.c (attach): Initialize ld.mode to MLD_NORMAL for
 	all scanners but MFS-12000SP.
	(line_distance): In MD_MFS correction mode, do not issue LD
	(sane_close): Free s->ld.red_buf if non-NULL.
	(fix_line_distance_mfs): New function.
	(fix_line_distance_normal): Rename from fix_line_distance().
	(reader_process): In MLD_MFS line-distance mode, call the
	mfs-specific routine, not the normal one.

	* backend/mustek.h (Mustek_Scanner): New members ld.red_buf,
	(MUSTEK_FLAG_LD_MFS): New flag to indicate when MFS-specific
 	line-distance correction is needed.

	* backend/metanet.c: Fix up some minor formatting problems due
	to indent.

	* Merge in Andy's netsane diffs.

Sun Jan 26 00:04:22 1997  David Mosberger-Tang  <davidm@azstarnet.com>

	* frontend/xscan.c (zoom_in_preview): Ignore selections of zero
	or negative width/height.
	(set_max_selection): Use SANE_UNFIX() instead of open coding.
	Adapted to use gtkglue.

	* backend/metadl.c (sane_init): Grab authorization callback.
	(authorization_callback): New variable.
	(load): Pass authorization callback to init function.

	* frontend/gtkglue.h (gsg_destroy_dialog): Add param_callback.

Sat Jan 25 17:35:52 1997  David Mosberger-Tang  <davidm@azstarnet.com>

	* frontend/Makefile.in (distclean): Mention $(TESTPROGRAMS).

	* backend/metanet.c (copy_opt): Fix constraint-length computation.

	* backend/metadl.c (sane_get_devices): Pass along LOCA_ONLY arg
	to backend.

	* frontend/xcam.c (main): Remove extraneous calls to gtk_exit()
	and sane_exit().

	* frontend/scan.c (main): Install sane_exit() as atexit handler.

	* backend/metadl.c (sane_get_devices): Ignore NULL BE_LIST.

	* frontend/saned.c (quit): New function.
	(main): catch SIGALRM, and SIGPIPE.

	* backend/metanet.c (sane_get_devices): Return empty list of

	* frontend/saned.c (readcmd): Don't take LOCAL arg from
 	request---always pass SANE_TRUE!

	* doc/netprotocol.doc (sane_get_devices): Don't need LOCAL arg.

	* include/sanei.h: Include <sane.h>.

	* frontend/test.c (testsane): Print status message instead of
	status code and make robust against failed calls.  Use fprintf(stderr
	instead of printf.

	* backend/qcam.c (reader_process): Remove extraneous arg.
	(reader_process): Declare `static' to make setjmp() safe.

	* frontend/saned.c (readcmd): Delete unused variable schr_hlp.
	(peerfp): New variable.
	Rename ns_printf() to sanei_printf() and pass peerfp arg.
	Rename ns_scanf() to sanei_scanf() and pass peerfp arg.
	(say_helo): Make peerfp refer to fd 0.

	* backend/metanet.c (openit): Return FILE*, not socket.
	(openit): Return 0, not -1 in case of failure.
	(peerfp): New variable.
	Rename ns_printf() to sanei_printf() and pass peerfp arg.
	Rename ns_scanf() to sanei_scanf() and pass peerfp arg.

	* sanei/sane_strstatus.c: New file (in lieu of backend/sane.c)
	* sanei/sanei_constrain_value.c: Ditto.
	* sanei/sanei_init_debug.c: Ditto.

	* sanei/sanei_scanf.c (ns_scanf): New file (based on Andy's
	Use int8_t for 'c', int32_t for 'd'.
	Include <sys/types.h>.

	* sanei/sanei_printf.c (sanei_printf): New file (based on Andy's
	Use int8_t for 'c', int32_t for 'd'.
	Include <sys/types.h>.

	* include/netsane.h (CMD_SANE_STRS): Remove.

	* backend/metanet.c: Include <errno.h>
	(sane_strstatus): Remove.

	* backend/Makefile.in (BACKENDS): Mention libsane-metanet.

	* backend/metanet.c (openit): Use memcpy instead of bcopy.  Use
 	inet_aton() instead of inet_addr(), don't prototype.
	(sane_get_devices): Use strdup() instead of opencoding it.
	(sane_get_devices): Don't append " (NS)" to modelname!  Metanet
 	already prefixes the devicename with netsane, which is good

	* backend/sanei.h (IF_DBG): New macro.

	* PROJECTS (Backend): Mention saned, metanet, and autoadj.
	(Frontend): New info.

	* AUTHORS: Update to reflect sanescan -> xscan namechange.
	Credit Andy for netsane.

Fri Jan 24 00:01:45 1997  David Mosberger-Tang  <davidm@azstarnet.com>

	* doc/sane.tex (subsection{\code{sane\_get\_option\_descriptor}}):
	Define how long the returned option descriptor must remain valid.

	* frontend/gtkglue.c (autobutton_update): Check for
	(button_update): Ditto.

	* frontend/xcam.c (main): Add device info label.

	* backend/mustek.c (init_options): Make OPT_BRIGHTNESS and
 	OPT_CONTRAST inactive by default.

	* frontend/xcam.c (exit_callback): Only call gsg_destroy_dialog()
	if dialog is non-null.

Thu Jan 23 00:17:46 1997  David Mosberger-Tang  <davidm@azstarnet.com>

	* backend/mustek.c (sane_control_option): Return
 	SANE_STATUS_DEVICE_BUSY when attempting to set option during
	(sane_close): Call do_cancel(), not sane_cancel().
	(sane_start): Ditto.

	* backend/pnm.c (sod): Rename "File" group to "Source Selection".

	* frontend/xcam.c (device_name_dialog_cancel): New function.
	(device_name_dialog_ok): Ditto.
	(prompt_for_device_name): Ditto.
	(build_device_menu): Move "Rescan devices..." from build_files_menu()
	to here.  Add "Specify device name..." entry that invokes
	(play_stop_button): Ignore call if there is no device_dialog yet.
	(main): Don't attempt to set preview size if there is no device
	dialog yet.

	* frontend/gtkglue.c (text_entry_callback): Don't ignore tab
	key---it's used to switch focus!

	* backend/qcam.c (qc_wait): Return read value so optimizer won't
 	be able to get rid of it easily.
	(qc_lock_wait): Use same lockname as qcam-0.7d for
	(reader_process): Explicitly do an enable_ports() in the reader
 	process.  Linux/x86 doesn't inherit i/o port access rights.

	* frontend/xcam.c (stop_camera): New function.
	(input_available): Use stop_camera().
	(next_frame): Ditto.

	* backend/genscsi.c (genscsi_open): Add missing DBG_INIT(GENSCSI).
	(genscsi_cmd): Return SANE_STATUS_DEVICE_BUSY if EBUSY is

	* frontend/xcam.c (input_available): Fix line wrap for

	* include/sane.h: Remove old SANE_STATUS_AGAIN.
	* backend/sane.c (sane_strstatus): Ditto.
	* backend/mustek.c (sane_read): Return SANE_STATUS_GOOD, not AGAIN
	when no data available.
	(sane_start): Add debug printing.
	(sane_set_io_mode): Fix typo: return SANE_STATUS_GOOD on success.

	* backend/mustek.c (sane_control_option): Add support for
	(attach): Add lots of debug printing.

	* backend/qcam.README: New file.

	* backend/qcam.c (sane_control_option): Allow changing resolution
 	while scan is in progress, but set RELOAD_OPTIONS only if not
 	scanning already.

	* frontend/xcam.c (canvas_events): Get rid of old debug messages.

	* backend/qcam.c (sane_get_parameters): Update parameters only if
 	not scanning.  This makes it possible to change certain options
	(such as width/height while a scan is in progress).
	(sane_control_option): Allow changing of image corners,
 	transfer-scale, and depth while scan is in progress.  Set
	RELOAD_PARAMS only if scan is not in progress.
	(sane_start): Return DEVICE_BUSY if scan is in progress.

	* configure.in (PACKAGE_VERSION): Version 0.41 released.

	* backend/qcam.c (brightness_range): New variable.
	(init_options): Use brightness_range instead of u8_range to
	avoid going into bulb-mode accidentally.

Wed Jan 22 09:16:21 1997  David Mosberger-Tang  <davidm@azstarnet.com>

	* backend/qcam.c (reader_process): Correct typo: it's buf, not
 	buffer that we want to write out in high-res mode.
	(qc_reset): New function.
	(reader_process): Send at least one byte of data after receiving a
	(sighandler): New function.
	(sane_cancel): If a read request is outstanding, cancel request by
 	(a) sending SIGINT to reader process, (b) reading one byte of data
 	in blocking mode, and then (c) reading whatever is left in the
 	pipe in non-blocking mode.
	(sane_read): Return SANE_STATUS_CANCELLED if SCANNING is not set.

	* backend/qcam.h (QC_Scanner): Remove unused x/y fields.

	* backend/qcam.c (sane_close): Call disable_ports().
	(sane_init): Replace isblank() with isspace() (former is a GNU
	(sane_control_option): Scale corner coordinates when switching
 	resolution and ensure they're always legal values.
	(sane_close): Check for reader_pid >= 0 not != 0!
	(sane_exit): Move disable_ports () from sane_close to here.
	(sane_start): Keep track of when we're holding lock.
	(sane_read): Release lock if s->holding_lock is TRUE and we
	read a few bytes.
	(sane_cancel): Release lock if it's being held.

	* backend/qcam.c: Clean up unused variables.

Tue Jan 21 13:49:00 1997  David Mosberger-Tang  <davidm@azstarnet.com>

	* backend/qcam.c (sane_control_option): Keep track of changes to
 	option values.
	(sane_get_select_fd): Implemented.
	(sane_set_io_mode): Ditto.
	(reader_process): New function.
	(sane_start): Modify to use reader_process().

	* backend/qcam.h: (struct QC_Scanner): New field value_changed.

Mon Jan 20 22:11:11 1997  David Mosberger-Tang  <davidm@azstarnet.com>

	* backend/metadl.c (sane_open): Correctly handle case where
	backend name is empty.

Sun Jan 19 10:29:43 1997  David Mosberger-Tang  <davidm@azstarnet.com>

	* backend/qcam.c (attach): Add qc_wait() calls after each
 	write_lpcontrol() call to ensure reliable communication.
	(attach): Add debug output in case of failure.

	* Version 0.4 released.

Sat Jan 18 10:12:40 1997  David Mosberger-Tang  <davidm@azstarnet.com>

	* frontend/xscan.c (get_scan_size): Handle case where scan
 	width/height is of type SANE_TYPE_INT.
	(get_scan_size): If width/height unit is pixels and the height is
 	less than 500 pixels, use a ratio of 1.
	(device_dialog): Call update_complete_dialog() to ensure inactive
 	options do not show (there probably is a better solution to this).

	* frontend/scan.c (main): Compute bottom-right position as
 	top-left + width/height - 1 (the - 1 is new and necessary and
 	works both for fixed and integer values).
	(print_option): Insert line-break when column >= 79 (not 80) to
 	leave last column blank (better when running inside Emacs, for
	(main): Fix typos: case 't': window[2] -> window[3], switch short
 	option names for top/left.
	(print_option): Print current option values (except for vectors).
	(fetch_options): Another off by one bug: width is br_x|y-tl_x|y+1.

Thu Jan 16 20:26:29 1997  David Mosberger-Tang  <davidm@azstarnet.com>

	* backend/sane.c (sanei_constrain_value): Fix so it properly
 	handles strings that are longer than any of the strings in a
 	string list.

	* frontend/scan.c (main): Subtract value of top-left-x/top-left-y
	from width/height, respectively after all options have been
	read in.
	(main): Print help message _after_ options have been processed.
	(fetch_options): New function.
	(set_option): Call fetch_options() if SANE_INFO_RELOAD_OPTIONS is
	(main): Call fetch_options() instead of open-coding same.

	* doc/sane.tex (subsection{Device Descriptor Type}): Add index
	entry for device-name.

Wed Jan 15 19:55:03 1997  David Mosberger-Tang  <davidm@azstarnet.com>

	* backend/metadl.c (sane_init): Call DBG_INIT() and declare
	debug level variable with DBG_DECL.  Added various debug

	* backend/pnm.c (sane_init): Ditto.
	* backend/mustek.c (sane_init): Ditto.

	* frontend/scan.c (parse_scalar): Default to mm again (instead of
 	cm).  Using `mm' as the default is counter-intuitive since the
 	help info is printed with `mm' as the unit.

	* frontend/xscan.c (main): Pass local_only==SANE_FALSE as second
	argument to sane_get_devices().

Sun Jan 12 13:12:45 1997  David Mosberger-Tang  <davidm@azstarnet.com>

	* backend/sane.c (sanei_constrain_value): For string-lists, ignore
 	case and allow prefixes as long as they remain unique.

	* frontend/scan.c (print_option): Print "auto" as a legal option
 	value if the option has capability SANE_CAP_AUTOMATIC set.
	(process_backend_option): If option has SANE_CAP_AUTOMATIC set,
 	let option value of "auto" turn on automatic mode.

Wed Jan  8 19:55:31 1997  David Mosberger-Tang  <davidm@azstarnet.com>

	* backend/Makefile.in (install): Modify install rule so that
	$(libdir) gets added to /etc/ld.so.conf if it isn't there
	(COMPILE): Use $(SHCFLAGS) instead of $(CFLAGS).
	(LINK): Remove (unused).

Wed Dec 25 20:21:39 1996  David Mosberger-Tang  <davidm@azstarnet.com>

	* backend/mustek.README: Add section "SCSI Adapter Tips".

Fri Dec 13 20:02:03 1996  David Mosberger-Tang  <davidm@azstarnet.com>

	* backend/mustek.c (line_distance): Rename
	Include <config.h>.

Thu Dec 12 20:19:26 1996  David Mosberger-Tang  <davidm@azstarnet.com>

	* backend/mustek.h (next): New member.  Forms linked list of open
 	handles.  * backend/mustek.c (first_handle): New variable.  Root
 	of list of open handles.
	(sane_open): Insert handle into list of open handles.
	(sane_close): Remove handle from list of open handles.

Wed Dec  4 18:37:45 1996  David Mosberger-Tang  <davidm@azstarnet.com>

	* backend/mustek.c (attach): Added back MFS-12000SP, MFS-08000SP,
 	and MFS-06000SP.  At least the first one really does exist.  I
 	don't know how the differ from the other scanners, but it looks as
 	if line-distance correction might be different.

Tue Dec  3 21:22:54 1996  David Mosberger-Tang  <davidm@azstarnet.com>

	* backend/sane.c (sane_strstatus): Remove trailing dot from error

Mon Dec  2 19:12:53 1996  David Mosberger-Tang  <davidm@azstarnet.com>

	* backend/mustek.c (max_string_size): New function to determine
 	maximum size of a string constraint list.
	(init_options): Use max_string_size () to initialize size of
 	string-valued options.

Sun Dec  1 15:44:53 1996  David Mosberger-Tang  <davidm@azstarnet.com>

	* Version 0.1 released.

	* backend/mustek.c (attach): Fix mispelled/bad model names:
		MFS-12000SP -> MSF-12000SP
		MFS-08000SP -> MSF-08000SP
		MFS-06000SP -> MSF-06000SP
		MFS-08000CZ -> <removed>
		MFS-06000CZ -> <removed>

Tue Nov 26 19:11:18 1996  David Mosberger-Tang  <davidm@azstarnet.com>

	* frontend/scan.c (print_option): Separate option name from option
 	values by blank, not equal so the syntax is correct even for short
	(parse_scalar): Added missing newline to error message.

Sat Nov 16 17:26:19 1996  David Mosberger-Tang  <davidm@azstarnet.com>

	* frontend/scan.c (main): Created (by Andy).

	* backend/pnm.c: Adapted from Andy's pnm.c (just minor updates).

	* backend/mustek.c: Created.
	* backend/metadl.c: Ditto.