Makefile.in   Makefile.in 
# Makefile.in generated by automake 1.10 from Makefile.am. # Makefile.in generated by automake 1.11.1 from Makefile.am.
# @configure_input@ # @configure_input@
# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
# 2003, 2004, 2005, 2006 Free Software Foundation, Inc. # 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation,
# Inc.
# This Makefile.in is free software; the Free Software Foundation # This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it, # gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved. # with or without modifications, as long as this notice is preserved.
# This program is distributed in the hope that it will be useful, # This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without # but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A # even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE. # PARTICULAR PURPOSE.
@SET_MAKE@ @SET_MAKE@
VPATH = @srcdir@ VPATH = @srcdir@
pkgdatadir = $(datadir)/@PACKAGE@ pkgdatadir = $(datadir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
pkglibexecdir = $(libexecdir)/@PACKAGE@
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
install_sh_DATA = $(install_sh) -c -m 644 install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c install_sh_SCRIPT = $(install_sh) -c
INSTALL_HEADER = $(INSTALL_DATA) INSTALL_HEADER = $(INSTALL_DATA)
transform = $(program_transform_name) transform = $(program_transform_name)
NORMAL_INSTALL = : NORMAL_INSTALL = :
PRE_INSTALL = : PRE_INSTALL = :
POST_INSTALL = : POST_INSTALL = :
NORMAL_UNINSTALL = : NORMAL_UNINSTALL = :
skipping to change at line 45 skipping to change at line 47
subdir = doc/man subdir = doc/man
DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/acinclude.m4 \ am__aclocal_m4_deps = $(top_srcdir)/acinclude.m4 \
$(top_srcdir)/configure.in $(top_srcdir)/configure.in
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4) $(ACLOCAL_M4)
mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
CONFIG_HEADER = $(top_builddir)/include/config.h CONFIG_HEADER = $(top_builddir)/include/config.h
CONFIG_CLEAN_FILES = CONFIG_CLEAN_FILES =
CONFIG_CLEAN_VPATH_FILES =
SOURCES = SOURCES =
DIST_SOURCES = DIST_SOURCES =
RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \ RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
html-recursive info-recursive install-data-recursive \ html-recursive info-recursive install-data-recursive \
install-dvi-recursive install-exec-recursive \ install-dvi-recursive install-exec-recursive \
install-html-recursive install-info-recursive \ install-html-recursive install-info-recursive \
install-pdf-recursive install-ps-recursive install-recursive \ install-pdf-recursive install-ps-recursive install-recursive \
installcheck-recursive installdirs-recursive pdf-recursive \ installcheck-recursive installdirs-recursive pdf-recursive \
ps-recursive uninstall-recursive ps-recursive uninstall-recursive
RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \ RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \
distclean-recursive maintainer-clean-recursive distclean-recursive maintainer-clean-recursive
AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \
$(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \
distdir
ETAGS = etags ETAGS = etags
CTAGS = ctags CTAGS = ctags
DIST_SUBDIRS = $(SUBDIRS) DIST_SUBDIRS = $(SUBDIRS)
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
am__relativize = \
dir0=`pwd`; \
sed_first='s,^\([^/]*\)/.*$$,\1,'; \
sed_rest='s,^[^/]*/*,,'; \
sed_last='s,^.*/\([^/]*\)$$,\1,'; \
sed_butlast='s,/*[^/]*$$,,'; \
while test -n "$$dir1"; do \
first=`echo "$$dir1" | sed -e "$$sed_first"`; \
if test "$$first" != "."; then \
if test "$$first" = ".."; then \
dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
else \
first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
if test "$$first2" = "$$first"; then \
dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
else \
dir2="../$$dir2"; \
fi; \
dir0="$$dir0"/"$$first"; \
fi; \
fi; \
dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
done; \
reldir="$$dir2"
ACLOCAL = @ACLOCAL@ ACLOCAL = @ACLOCAL@
ADDITIONAL_LIBS = @ADDITIONAL_LIBS@ ADDITIONAL_LIBS = @ADDITIONAL_LIBS@
AMTAR = @AMTAR@ AMTAR = @AMTAR@
AR = @AR@ AR = @AR@
AUTOCONF = @AUTOCONF@ AUTOCONF = @AUTOCONF@
AUTOHEADER = @AUTOHEADER@ AUTOHEADER = @AUTOHEADER@
AUTOMAKE = @AUTOMAKE@ AUTOMAKE = @AUTOMAKE@
AWK = @AWK@ AWK = @AWK@
CC = @CC@ CC = @CC@
CCDEPMODE = @CCDEPMODE@ CCDEPMODE = @CCDEPMODE@
CFLAGS = @CFLAGS@ CFLAGS = @CFLAGS@
CPP = @CPP@ CPP = @CPP@
CPPFLAGS = @CPPFLAGS@ CPPFLAGS = @CPPFLAGS@
CXX = @CXX@
CXXCPP = @CXXCPP@
CXXDEPMODE = @CXXDEPMODE@
CXXFLAGS = @CXXFLAGS@
CYGPATH_W = @CYGPATH_W@ CYGPATH_W = @CYGPATH_W@
DEFS = @DEFS@ DEFS = @DEFS@
DEPDIR = @DEPDIR@ DEPDIR = @DEPDIR@
ECHO = @ECHO@ DLLTOOL = @DLLTOOL@
DSYMUTIL = @DSYMUTIL@
DUMPBIN = @DUMPBIN@
ECHO_C = @ECHO_C@ ECHO_C = @ECHO_C@
ECHO_N = @ECHO_N@ ECHO_N = @ECHO_N@
ECHO_T = @ECHO_T@ ECHO_T = @ECHO_T@
EGREP = @EGREP@ EGREP = @EGREP@
ENDIANESS = @ENDIANESS@ ENDIANESS = @ENDIANESS@
EXEEXT = @EXEEXT@ EXEEXT = @EXEEXT@
F77 = @F77@ FGREP = @FGREP@
FFLAGS = @FFLAGS@
GREP = @GREP@ GREP = @GREP@
HAVE_PACKET_SOCKET = @HAVE_PACKET_SOCKET@ HAVE_PACKET_SOCKET = @HAVE_PACKET_SOCKET@
INSTALL = @INSTALL@ INSTALL = @INSTALL@
INSTALL_DATA = @INSTALL_DATA@ INSTALL_DATA = @INSTALL_DATA@
INSTALL_PROGRAM = @INSTALL_PROGRAM@ INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_SCRIPT = @INSTALL_SCRIPT@ INSTALL_SCRIPT = @INSTALL_SCRIPT@
INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
LD = @LD@
LDFLAGS = @LDFLAGS@ LDFLAGS = @LDFLAGS@
LIBNET_CONFIG_CFLAGS = @LIBNET_CONFIG_CFLAGS@ LIBNET_CONFIG_CFLAGS = @LIBNET_CONFIG_CFLAGS@
LIBNET_CONFIG_DEFINES = @LIBNET_CONFIG_DEFINES@ LIBNET_CONFIG_DEFINES = @LIBNET_CONFIG_DEFINES@
LIBNET_CONFIG_LIBS = @LIBNET_CONFIG_LIBS@ LIBNET_CONFIG_LIBS = @LIBNET_CONFIG_LIBS@
LIBOBJS = @LIBOBJS@ LIBOBJS = @LIBOBJS@
LIBS = @LIBS@ LIBS = @LIBS@
LIBTOOL = @LIBTOOL@ LIBTOOL = @LIBTOOL@
LIPO = @LIPO@
LN_S = @LN_S@ LN_S = @LN_S@
LTLIBOBJS = @LTLIBOBJS@ LTLIBOBJS = @LTLIBOBJS@
MAINT = @MAINT@ MAINT = @MAINT@
MAKEINFO = @MAKEINFO@ MAKEINFO = @MAKEINFO@
MANIFEST_TOOL = @MANIFEST_TOOL@
MKDIR_P = @MKDIR_P@ MKDIR_P = @MKDIR_P@
NM = @NM@
NMEDIT = @NMEDIT@
OBJDUMP = @OBJDUMP@
OBJEXT = @OBJEXT@ OBJEXT = @OBJEXT@
OTOOL = @OTOOL@
OTOOL64 = @OTOOL64@
PACKAGE = @PACKAGE@ PACKAGE = @PACKAGE@
PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
PACKAGE_NAME = @PACKAGE_NAME@ PACKAGE_NAME = @PACKAGE_NAME@
PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_STRING = @PACKAGE_STRING@
PACKAGE_TARNAME = @PACKAGE_TARNAME@ PACKAGE_TARNAME = @PACKAGE_TARNAME@
PACKAGE_URL = @PACKAGE_URL@
PACKAGE_VERSION = @PACKAGE_VERSION@ PACKAGE_VERSION = @PACKAGE_VERSION@
PATH_SEPARATOR = @PATH_SEPARATOR@ PATH_SEPARATOR = @PATH_SEPARATOR@
RANLIB = @RANLIB@ RANLIB = @RANLIB@
SED = @SED@ SED = @SED@
SET_MAKE = @SET_MAKE@ SET_MAKE = @SET_MAKE@
SHELL = @SHELL@ SHELL = @SHELL@
STRIP = @STRIP@ STRIP = @STRIP@
VERSION = @VERSION@ VERSION = @VERSION@
abs_builddir = @abs_builddir@ abs_builddir = @abs_builddir@
abs_srcdir = @abs_srcdir@ abs_srcdir = @abs_srcdir@
abs_top_builddir = @abs_top_builddir@ abs_top_builddir = @abs_top_builddir@
abs_top_srcdir = @abs_top_srcdir@ abs_top_srcdir = @abs_top_srcdir@
ac_ct_AR = @ac_ct_AR@
ac_ct_CC = @ac_ct_CC@ ac_ct_CC = @ac_ct_CC@
ac_ct_CXX = @ac_ct_CXX@ ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
ac_ct_F77 = @ac_ct_F77@
am__include = @am__include@ am__include = @am__include@
am__leading_dot = @am__leading_dot@ am__leading_dot = @am__leading_dot@
am__quote = @am__quote@ am__quote = @am__quote@
am__tar = @am__tar@ am__tar = @am__tar@
am__untar = @am__untar@ am__untar = @am__untar@
bindir = @bindir@ bindir = @bindir@
build = @build@ build = @build@
build_alias = @build_alias@ build_alias = @build_alias@
build_cpu = @build_cpu@ build_cpu = @build_cpu@
build_os = @build_os@ build_os = @build_os@
skipping to change at line 175 skipping to change at line 212
psdir = @psdir@ psdir = @psdir@
sbindir = @sbindir@ sbindir = @sbindir@
sharedstatedir = @sharedstatedir@ sharedstatedir = @sharedstatedir@
srcdir = @srcdir@ srcdir = @srcdir@
sysconfdir = @sysconfdir@ sysconfdir = @sysconfdir@
target = @target@ target = @target@
target_alias = @target_alias@ target_alias = @target_alias@
target_cpu = @target_cpu@ target_cpu = @target_cpu@
target_os = @target_os@ target_os = @target_os@
target_vendor = @target_vendor@ target_vendor = @target_vendor@
top_build_prefix = @top_build_prefix@
top_builddir = @top_builddir@ top_builddir = @top_builddir@
top_srcdir = @top_srcdir@ top_srcdir = @top_srcdir@
SUBDIRS = man3 SUBDIRS = man3
all: all-recursive all: all-recursive
.SUFFIXES: .SUFFIXES:
$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__ configure_deps) $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__ configure_deps)
@for dep in $?; do \ @for dep in $?; do \
case '$(am__configure_deps)' in \ case '$(am__configure_deps)' in \
*$$dep*) \ *$$dep*) \
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \ ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh )
&& exit 0; \ \
&& { if test -f $@; then exit 0; else break; fi; }; \
exit 1;; \ exit 1;; \
esac; \ esac; \
done; \ done; \
echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu doc/man/Makefile'; \ echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu doc/man/Makefile'; \
cd $(top_srcdir) && \ $(am__cd) $(top_srcdir) && \
$(AUTOMAKE) --gnu doc/man/Makefile $(AUTOMAKE) --gnu doc/man/Makefile
.PRECIOUS: Makefile .PRECIOUS: Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
@case '$?' in \ @case '$?' in \
*config.status*) \ *config.status*) \
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
*) \ *) \
echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/ $@ $(am__depfiles_maybe)'; \ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/ $@ $(am__depfiles_maybe)'; \
cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am __depfiles_maybe);; \ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am __depfiles_maybe);; \
esac; esac;
$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPE NDENCIES) $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPE NDENCIES)
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(am__aclocal_m4_deps):
mostlyclean-libtool: mostlyclean-libtool:
-rm -f *.lo -rm -f *.lo
clean-libtool: clean-libtool:
-rm -rf .libs _libs -rm -rf .libs _libs
# This directory's subdirectories are mostly independent; you can cd # This directory's subdirectories are mostly independent; you can cd
# into them and run `make' without going through this Makefile. # into them and run `make' without going through this Makefile.
# To change the values of `make' variables: instead of editing Makefiles, # To change the values of `make' variables: instead of editing Makefiles,
# (1) if the variable is set in `config.status', edit `config.status' # (1) if the variable is set in `config.status', edit `config.status'
# (which will cause the Makefiles to be regenerated when you run `make' ); # (which will cause the Makefiles to be regenerated when you run `make' );
# (2) otherwise, pass the desired values on the `make' command line. # (2) otherwise, pass the desired values on the `make' command line.
$(RECURSIVE_TARGETS): $(RECURSIVE_TARGETS):
@failcom='exit 1'; \ @fail= failcom='exit 1'; \
for f in x $$MAKEFLAGS; do \ for f in x $$MAKEFLAGS; do \
case $$f in \ case $$f in \
*=* | --[!k]*);; \ *=* | --[!k]*);; \
*k*) failcom='fail=yes';; \ *k*) failcom='fail=yes';; \
esac; \ esac; \
done; \ done; \
dot_seen=no; \ dot_seen=no; \
target=`echo $@ | sed s/-recursive//`; \ target=`echo $@ | sed s/-recursive//`; \
list='$(SUBDIRS)'; for subdir in $$list; do \ list='$(SUBDIRS)'; for subdir in $$list; do \
echo "Making $$target in $$subdir"; \ echo "Making $$target in $$subdir"; \
if test "$$subdir" = "."; then \ if test "$$subdir" = "."; then \
dot_seen=yes; \ dot_seen=yes; \
local_target="$$target-am"; \ local_target="$$target-am"; \
else \ else \
local_target="$$target"; \ local_target="$$target"; \
fi; \ fi; \
(cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
|| eval $$failcom; \ || eval $$failcom; \
done; \ done; \
if test "$$dot_seen" = "no"; then \ if test "$$dot_seen" = "no"; then \
$(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
fi; test -z "$$fail" fi; test -z "$$fail"
$(RECURSIVE_CLEAN_TARGETS): $(RECURSIVE_CLEAN_TARGETS):
@failcom='exit 1'; \ @fail= failcom='exit 1'; \
for f in x $$MAKEFLAGS; do \ for f in x $$MAKEFLAGS; do \
case $$f in \ case $$f in \
*=* | --[!k]*);; \ *=* | --[!k]*);; \
*k*) failcom='fail=yes';; \ *k*) failcom='fail=yes';; \
esac; \ esac; \
done; \ done; \
dot_seen=no; \ dot_seen=no; \
case "$@" in \ case "$@" in \
distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
*) list='$(SUBDIRS)' ;; \ *) list='$(SUBDIRS)' ;; \
skipping to change at line 275 skipping to change at line 314
done; \ done; \
rev="$$rev ."; \ rev="$$rev ."; \
target=`echo $@ | sed s/-recursive//`; \ target=`echo $@ | sed s/-recursive//`; \
for subdir in $$rev; do \ for subdir in $$rev; do \
echo "Making $$target in $$subdir"; \ echo "Making $$target in $$subdir"; \
if test "$$subdir" = "."; then \ if test "$$subdir" = "."; then \
local_target="$$target-am"; \ local_target="$$target-am"; \
else \ else \
local_target="$$target"; \ local_target="$$target"; \
fi; \ fi; \
(cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
|| eval $$failcom; \ || eval $$failcom; \
done && test -z "$$fail" done && test -z "$$fail"
tags-recursive: tags-recursive:
list='$(SUBDIRS)'; for subdir in $$list; do \ list='$(SUBDIRS)'; for subdir in $$list; do \
test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tag s); \ test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLA GS) tags); \
done done
ctags-recursive: ctags-recursive:
list='$(SUBDIRS)'; for subdir in $$list; do \ list='$(SUBDIRS)'; for subdir in $$list; do \
test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) cta gs); \ test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLA GS) ctags); \
done done
ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
unique=`for i in $$list; do \ unique=`for i in $$list; do \
if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
done | \ done | \
$(AWK) ' { files[$$0] = 1; } \ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
END { for (i in files) print i; }'`; \ END { if (nonempty) { for (i in files) print i; }; }'`; \
mkid -fID $$unique mkid -fID $$unique
tags: TAGS tags: TAGS
TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
$(TAGS_FILES) $(LISP) $(TAGS_FILES) $(LISP)
tags=; \ set x; \
here=`pwd`; \ here=`pwd`; \
if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \ if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
include_option=--etags-include; \ include_option=--etags-include; \
empty_fix=.; \ empty_fix=.; \
else \ else \
include_option=--include; \ include_option=--include; \
empty_fix=; \ empty_fix=; \
fi; \ fi; \
list='$(SUBDIRS)'; for subdir in $$list; do \ list='$(SUBDIRS)'; for subdir in $$list; do \
if test "$$subdir" = .; then :; else \ if test "$$subdir" = .; then :; else \
test ! -f $$subdir/TAGS || \ test ! -f $$subdir/TAGS || \
tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \ set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
fi; \ fi; \
done; \ done; \
list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
unique=`for i in $$list; do \ unique=`for i in $$list; do \
if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
done | \ done | \
$(AWK) ' { files[$$0] = 1; } \ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
END { for (i in files) print i; }'`; \ END { if (nonempty) { for (i in files) print i; }; }'`; \
if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \ shift; \
if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
test -n "$$unique" || unique=$$empty_fix; \ test -n "$$unique" || unique=$$empty_fix; \
$(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ if test $$# -gt 0; then \
$$tags $$unique; \ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
"$$@" $$unique; \
else \
$(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
$$unique; \
fi; \
fi fi
ctags: CTAGS ctags: CTAGS
CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
$(TAGS_FILES) $(LISP) $(TAGS_FILES) $(LISP)
tags=; \
here=`pwd`; \
list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
unique=`for i in $$list; do \ unique=`for i in $$list; do \
if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
done | \ done | \
$(AWK) ' { files[$$0] = 1; } \ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
END { for (i in files) print i; }'`; \ END { if (nonempty) { for (i in files) print i; }; }'`; \
test -z "$(CTAGS_ARGS)$$tags$$unique" \ test -z "$(CTAGS_ARGS)$$unique" \
|| $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
$$tags $$unique $$unique
GTAGS: GTAGS:
here=`$(am__cd) $(top_builddir) && pwd` \ here=`$(am__cd) $(top_builddir) && pwd` \
&& cd $(top_srcdir) \ && $(am__cd) $(top_srcdir) \
&& gtags -i $(GTAGS_ARGS) $$here && gtags -i $(GTAGS_ARGS) "$$here"
distclean-tags: distclean-tags:
-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
distdir: $(DISTFILES) distdir: $(DISTFILES)
@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
list='$(DISTFILES)'; \ list='$(DISTFILES)'; \
dist_files=`for file in $$list; do echo $$file; done | \ dist_files=`for file in $$list; do echo $$file; done | \
sed -e "s|^$$srcdirstrip/||;t" \ sed -e "s|^$$srcdirstrip/||;t" \
-e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
case $$dist_files in \ case $$dist_files in \
*/*) $(MKDIR_P) `echo "$$dist_files" | \ */*) $(MKDIR_P) `echo "$$dist_files" | \
sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
sort -u` ;; \ sort -u` ;; \
esac; \ esac; \
for file in $$dist_files; do \ for file in $$dist_files; do \
if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); f i; \ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); f i; \
if test -d $$d/$$file; then \ if test -d $$d/$$file; then \
dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
if test -d "$(distdir)/$$file"; then \
find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rw
x {} \;; \
fi; \
if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rw
x {} \;; \
fi; \ fi; \
cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
else \ else \
test -f $(distdir)/$$file \ test -f "$(distdir)/$$file" \
|| cp -p $$d/$$file $(distdir)/$$file \ || cp -p $$d/$$file "$(distdir)/$$file" \
|| exit 1; \ || exit 1; \
fi; \ fi; \
done done
list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
if test "$$subdir" = .; then :; else \ if test "$$subdir" = .; then :; else \
test -d "$(distdir)/$$subdir" \ test -d "$(distdir)/$$subdir" \
|| $(MKDIR_P) "$(distdir)/$$subdir" \ || $(MKDIR_P) "$(distdir)/$$subdir" \
|| exit 1; \ || exit 1; \
distdir=`$(am__cd) $(distdir) && pwd`; \ fi; \
top_distdir=`$(am__cd) $(top_distdir) && pwd`; \ done
(cd $$subdir && \ @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
if test "$$subdir" = .; then :; else \
dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
$(am__relativize); \
new_distdir=$$reldir; \
dir1=$$subdir; dir2="$(top_distdir)"; \
$(am__relativize); \
new_top_distdir=$$reldir; \
echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$ne
w_top_distdir" distdir="$$new_distdir" \\"; \
echo " am__remove_distdir=: am__skip_length_check=: am__skip
_mode_fix=: distdir)"; \
($(am__cd) $$subdir && \
$(MAKE) $(AM_MAKEFLAGS) \ $(MAKE) $(AM_MAKEFLAGS) \
top_distdir="$$top_distdir" \ top_distdir="$$new_top_distdir" \
distdir="$$distdir/$$subdir" \ distdir="$$new_distdir" \
am__remove_distdir=: \ am__remove_distdir=: \
am__skip_length_check=: \ am__skip_length_check=: \
am__skip_mode_fix=: \
distdir) \ distdir) \
|| exit 1; \ || exit 1; \
fi; \ fi; \
done done
check-am: all-am check-am: all-am
check: check-recursive check: check-recursive
all-am: Makefile all-am: Makefile
installdirs: installdirs-recursive installdirs: installdirs-recursive
installdirs-am: installdirs-am:
install: install-recursive install: install-recursive
skipping to change at line 416 skipping to change at line 474
$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=- s \ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=- s \
`test -z '$(STRIP)' || \ `test -z '$(STRIP)' || \
echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
mostlyclean-generic: mostlyclean-generic:
clean-generic: clean-generic:
distclean-generic: distclean-generic:
-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
maintainer-clean-generic: maintainer-clean-generic:
@echo "This command is intended for maintainers to use" @echo "This command is intended for maintainers to use"
@echo "it deletes files that may require special tools to rebuild." @echo "it deletes files that may require special tools to rebuild."
clean: clean-recursive clean: clean-recursive
clean-am: clean-generic clean-libtool mostlyclean-am clean-am: clean-generic clean-libtool mostlyclean-am
distclean: distclean-recursive distclean: distclean-recursive
-rm -f Makefile -rm -f Makefile
distclean-am: clean-am distclean-generic distclean-tags distclean-am: clean-am distclean-generic distclean-tags
dvi: dvi-recursive dvi: dvi-recursive
dvi-am: dvi-am:
html: html-recursive html: html-recursive
html-am:
info: info-recursive info: info-recursive
info-am: info-am:
install-data-am: install-data-am:
install-dvi: install-dvi-recursive install-dvi: install-dvi-recursive
install-dvi-am:
install-exec-am: install-exec-am:
install-html: install-html-recursive install-html: install-html-recursive
install-html-am:
install-info: install-info-recursive install-info: install-info-recursive
install-info-am:
install-man: install-man:
install-pdf: install-pdf-recursive install-pdf: install-pdf-recursive
install-pdf-am:
install-ps: install-ps-recursive install-ps: install-ps-recursive
install-ps-am:
installcheck-am: installcheck-am:
maintainer-clean: maintainer-clean-recursive maintainer-clean: maintainer-clean-recursive
-rm -f Makefile -rm -f Makefile
maintainer-clean-am: distclean-am maintainer-clean-generic maintainer-clean-am: distclean-am maintainer-clean-generic
mostlyclean: mostlyclean-recursive mostlyclean: mostlyclean-recursive
mostlyclean-am: mostlyclean-generic mostlyclean-libtool mostlyclean-am: mostlyclean-generic mostlyclean-libtool
pdf: pdf-recursive pdf: pdf-recursive
pdf-am: pdf-am:
ps: ps-recursive ps: ps-recursive
ps-am: ps-am:
uninstall-am: uninstall-am:
.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) install-am \ .MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) ctags-recursive \
install-strip install-am install-strip tags-recursive
.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \ .PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
all all-am check check-am clean clean-generic clean-libtool \ all all-am check check-am clean clean-generic clean-libtool \
ctags ctags-recursive distclean distclean-generic \ ctags ctags-recursive distclean distclean-generic \
distclean-libtool distclean-tags distdir dvi dvi-am html \ distclean-libtool distclean-tags distdir dvi dvi-am html \
html-am info info-am install install-am install-data \ html-am info info-am install install-am install-data \
install-data-am install-dvi install-dvi-am install-exec \ install-data-am install-dvi install-dvi-am install-exec \
install-exec-am install-html install-html-am install-info \ install-exec-am install-html install-html-am install-info \
install-info-am install-man install-pdf install-pdf-am \ install-info-am install-man install-pdf install-pdf-am \
install-ps install-ps-am install-strip installcheck \ install-ps install-ps-am install-strip installcheck \
 End of changes. 53 change blocks. 
52 lines changed or deleted 128 lines changed or added

This html diff was produced by rfcdiff 1.41. The latest version is available from http://tools.ietf.org/tools/rfcdiff/